
                           ==============
                            README_E.TXT
                           ==============


This README file contains installation notes and important
information for the NEC VersaGlide.

NEC VersaGlide provides a convenient way to modify setting for 
NEC VersaGlide. The NEC VersaGlide drivers are compatible with 
most standard mice and similar pointing devices.
____________________________________________________________

README FILE CONTENTS

1. Driver Installation
    1.1 Installing from Mouse Properties
    1.2 Installing from Device Manager

2. Using the NEC VersaGlide Control Panel

3  Restoring Your Installation
    3.1 If "NEC VersaGlide" can be seen in the model column
    3.2 If "NEC VersaGlide" can't be seen in the model column

4. Troubleshooting
    4.1 Installing from Add New Hardware

5. Files On The Setup Disk

____________________________________________________________

1. Driver Installation

    1.1 Installing from Control Panel

     Use this procedure to change from a standard Windows 95
     mouse driver, or from another driver that uses the
     standard Mouse Properties sheet and contains the General
     tab:

     1) From the Start menu, select Settings, Control Panel.
     2) Double-click Mouse to open Mouse Properties.
     3) Select the General tab, then click Change. 
     4) The Select Device screen will appear, then Click Have
        Disk.
     5) Insert the driver disk in your floppy drive. Confirm
        or correct the source file path (normally "A:\"), 
        then click OK.
     6) Click NEC VersaGlide, then click OK to copy the
        driver files to your system.
     7) After the files are copied, Mouse Properties will
        show the new device name. Click Close.
     8) The System Settings Change message will offer to
        restart your computer so the new settings can take
        effect. Click Yes.


    1.2 Installing from Device Manager

     Use this procedure if you cannot access the Change
     option through Mouse Properties (for example, your
     current driver substitutes its own control panel):

     1) From the Start menu, select Settings, Control Panel.
     2) Double-click System to open System Properties.
     3) Select the Device Manager tab.
     4) Click the plus sign next to the Mouse category, then
        Double-click the current device name.
     5) Select the Driver tab, then click Change Driver. 
     6) If the Select Device screen will appear, then Click
        Have Disk.
     7) Insert the driver disk in your floppy drive. Confirm
        or correct the source file path (normally "A:\"), 
        then click OK.
     8) Click NEC VersaGlide, then click OK
     9) If returned to the property sheet Driver tab, then 
        Click OK to copy the driver files to your system.
     10)The System Settings Change message will offer to
        restart your computer so the new settings can take
        effect. Click Yes.


2. Using the NEC VersaGlide Control Panel

   NEC VersaGlide Control Panel provides easy to use method of 
   customizing pointing device settings.

     1) From the Start menu, select Settings, Control Panel.
     2) Double-click Mouse icon to open Mouse Properties. 
     3) Mouse properties are grouped into ten categories
       (Buttons, Pointers, Motion, Orientation, Shortcuts, 
        Tapping, Gesture, Feedback, Easy Launched, Easy Capture
        General).
        NOTE:Properties pages are changed by device function
             to six or seven pages.  
     4) When you are satisfied with your settings, click OK
        to close the NEC VersaGlide Control Panel. If you
        want detail of operation, please see help file accessible
        from within the NEC VersaGlide Control Panel.

3  Restoring Your Installation

     The NEC VersaGlide drivers are compatible with most standard
     mice and similar pointing devices. However, If you do
     change driver to use another device, you can restore the 
     NEC VersaGlide drivers as follows. 

     Follow the first-time installation procedure in section 1,
     (using the Control Panel or Device Manager method) as for as
     the Select Device screen.

    3.1 If "NEC VersaGlide" can be seen in the model column
     1) Click NEC VersaGlide, then click OK.
     2) When return to previous property sheet, then click Close or 
        click OK.
     3) The System Settings Change message is displayed. Click 
        Yes so the new setting can take effect.

    3.2 If "NEC VersaGlide" can't be seen in the model column
     1) Click on Show all devices.
     2) Click NEC in Manufacturers column.
     3) Click NEC VersaGlide in Models column, then click OK.
     4) When returned to previous property sheet, then click Close or 
        click OK.
     5) The System Settings Change message is displayed. Click 
        Yes so the new setting can take effect.

       NOTE:If you do not see NEC in the Manufacturers column, 
            you can install as in section 1      


____________________________________________________________

4. Troubleshooting

    4.1 Installing from Add New Hardware
     Don't use the Add New Hardware Wizard for installing NEC VersaGlide.
     This method  produces a confusing display in Device Manager,
     because it adds new Mouse entries without clearing the old
     ones. It may also lead to inaccurate information about
     which pointing devices are active or inactive.


____________________________________________________________

5. Files On The Setup Disk

     README_E.TXT    Information file(English)
     README_J.TXT    Information file(Japanese)

     Apoint.INF      Setup script

     Apoint.VXD      Driver

     Apoint.DLL      Control panel
     Apwheel.dll     Control panel
     VXDIF.DLL       Control panel interface

     Apoint.EXE      Driver enhancements
     Apwheel.exe     Driver enhancements

     LOGO.BMP        Control panel logo

     APOINTJP.POP    Popup Help
     APOINTUS.POP    Popup Help
     APOINTSP.POP    Popup Help
     APOINTIT.POP    Popup Help
     APOINTGR.POP    Popup Help
     APOINTFR.POP    Popup Help
     APOINTCT.POP    Popup Help
     APOINTCS.POP    Popup Help
______________________________________________________________________
