*********************************************************
***           ATMEL WLan PC Card 11Mbps               ***
***              Linux Device Driver                  ***
***            Copyright (c) 2000-2001                ***
***                ATMEL CO., Ltd.                    ***
*********************************************************

A. Module Parameters
--------------------
   You can configure the ATMEL 11Mbps PC Card by editing
   the config.opts located in the /etc/pcmcia directory.
   Change the parameters, whose default values aren't 
   those you want.

   i.e. if you want to connect to an access point named 
   WLAN just add in config.opts the following line
        module "fastvnet_cs" opts "ESSID=WLAN"

*********************************************************
***                 IMPORTANT NOTICE                  ***
*** Whenever you change any parameter in config.opts  ***
***   you must restart the pcmcia card services by    ***
***                      running :                    ***
***         /etc/rc.d/init.d/pcmcia restart           ***
*********************************************************

   The Parameters you can change and their default values 
   are:

   channel     :  1 - 14
      (default = 3)

   TxRate      :  0 ->   1Mbps
            	  1 ->   2Mbps
		  2 -> 5.5Mbps
		  3 ->  11Mbps
		  4 ->    Auto
      (default = 3 (11Mbps) )
	
   RTSThreshold :   1 - 2347
      (default = 2347)

   FragThreshold: 256 - 2346
      (default = 2346)

   OpMode       : 1 -> Ad-Hoc
	          2 -> Infrastructure
      (default = 2)

   ESSID	: ESSID to use (max 32 characters)
      (default = ANY)

   WepKeyToUse  : 0 -> WepKey1
	          1 -> WepKey2
		  2 -> WepKey3
		  3 -> WepKey4
		  4 -> None
		  (default = 4 (None) )			

   WepKey1      : maximum 5 bytes (must always be 2 characters/byte)
	
   WepKey2      : maximum 5 bytes (must always be 2 characters/byte)

   WepKey3      : maximum 5 bytes (must always be 2 characters/byte)

   WepKey4      : maximum 5 bytes (must always be 2 characters/byte)
      All WepKey's  are zero by default.

   WepMode      : 0 -> Mandatory
	          1 -> Optional
      (default = 0 (Mandatory) )

   AuthenticationType : 0 -> Open System
	                1 -> Shared Key
      (default = 0 (Open System) )
   PreambleType	   : 0 -> Long Preamble
	             1 -> Short Preamble
      (default = 0 (Long Preamble) )
      (In infrastructure mode PreambleType is autodetected).

   PwrMgmtMode	: 0 -> Active
	          1 -> Power Save
      (default = 0 (Active) )

B. Fastvnet_cs and Wireless Tools
---------------------------------

   The PCMCIA device driver is compatible with the wireless
   tools. You can set almost anything except Encryption and
   NWID. For them you have to use either the ATMEL command
   line tool (fvnet) or the application for X (xvnet).


	