Linksys, A Division of Cisco Systems Inc.

Document:  Readme.txt
Subject:   Firmware upgrade instructions

---------------------------------------------
***WARNING***: To ensure proper upgrade, the router will automatically reset to factory defaults!  Write down all configuration before performing this upgrade.


1)  Before you start, be sure you are using a PC that is connected to the WRV54G
    via a wired (Ethernet) connection.
2)  Open your web browser (e.g., Internet Explorer, Netscape, etc.)
3)  In the Address bar, type in the IP address of your router.  The default IP
    address is 192.168.1.1.
4)  Enter your user name and password.  The default user name and password is "admin",
    all lower case.
5)  Click on the Administration tab.
6)  Click on Firmware Upgrade.
7)  Browse for the firmware file that you have just extracted.  The file name should end
    in .rmt
8)  Click the Upgrade button.
9)  The router will begin its upgrade routine.  Do not power off or unplug the router until
    the process is completed.  This process may take up to 5 minutes to complete.

*********IMPORTANT********: You must reset your router back to factory defaults after upgrading the firmware.  Due to new features and fixes that are added, all old configuration values must be cleared out in order for the features and fixes to function properly.