Linksys, A division of Cisco Systems, Inc.

Product:                WRT54G version 7 (EMEA and APAC regions only)

Classification:         Firmware Release History

Firmware  Date:		December 27, 2006

Release Date:           January 17, 2007

Last Firmware Version:  7.00.4

_____________________________________________________________________________
General Notes: 
- This firmware is NOT backwards compatible with hardware versions prior to 7.0
- This firmware is only for usage in EMEA (Europe, Middle East, and Africa) and APAC (Asia-Pacific).
- Disconnect all wireless clients from the router during the upgrade process.  Make sure no wireless clients attempt to associate with the router until the upgrade process is complete.  
- After upgrading to this firmware, Setup Wizard ver. 7 (shipped with the product) can configure the router, but is no longer able to change the language on the web-based/GUI on the router.  To change the language using the wizard, you will need the latest version of the wizard.



Firmware 7.00.4
- Resolves interoperability issue with WAP54G and WRE54G in WPA-PSK mode.
- Resolves intermittent reboot issue when BitTorrent is running when UPnP is enabled on the router.
- Resolves wireless data rate performance issues.
- Resolves issue with router assigns declined IP address to LAN host.
- Resolves issue with QoS module algorithm.
- Resolves reboot issue if fragmentation threshold is set to value less than 1500.
- Resolves issue with wireless MAC filtering configuration GUI.
- Resolves issue with saving RADIUS passphrase.
- Resolves display problems in routing policy configuration GUI.
- Resolves issue of RIP request packets not being sent out after switching to router mode.
- Resolves issue of logging the same event more than once when log function is enabled.
- Resolves issue of unexpected clearing of log when user stops and closes traceroute.
- Resolves issue of not being able to accessing some configuration settings after changing password.
- Resolves issues with incorrect beacon interval acceptable range and beacon packets not being sent out on some particular settings.
- Corrects "Port Range Forward" policies validation.
- Fixes problem of not storing DNS address(es) correctly if static DNS address(es) is/are used.
- For security purpose, "Clone Your PC's MAC" functionality is no longer available if user accesses router remotely.
- Resolves issue of displaying incorrect HTTPS certificate message.
- Fixes problem in QoS configuration validation.
- Fixes incorrect supported rates in beacon packets when wireless mode is set to 'mixed'.
- Resolves reboot issue with setting beacon interval to value greater than 5000.
- Corrects ARP exchange behavior on WAN interface (DHCP mode) after obtaining IP address via DHCP.
- Corrects PPTP connection behavior when PPTP mode is set to "on-demand" mode.
- Resolved issue with not being able to set UPnP policy with port number less than 1024.
- Fixes problem of DMZ feature not functioning properly.
- Resolves issue with not showing the most up-to-date connection status on WAN interface in MS Windows XP via UPnP.
- Resolves issue with LAN host intermittently not being able to obtain IP address from router via DHCP when DHCP server is enabled.
- Resolves issue with IP address assignment via DHCP on some particular devices.
- Corrects DHCP protocol stack behavior when switching from PPPoE mode to DHCP mode.
- Corrects "Access Restriction" behavior when system time is not available.
- Resolves issue of not trying alternative DNS if the preferred DNS does not respond.


Firmware 7.00.1
- Initial Release













