Linksys, A division of Cisco Systems, Inc.

Product:                WRT54G

Classification:         Firmware Release History (European versions only)

Firmware Date:		April 27, 2005

Release Date:           April 29, 2005

Important Note: This firmware is for products sold in Europe only.  If this firmware is used on any 
other version of the routers, it can damage the router.  Disconnect all wireless clients from the 
router during the upgrade process.  Also, make sure no wireless clients attempt to associate with the 
router until the upgrade process is complete.  If you need to access older versions of the firmware 
for your router for any reason, please visit ftp.linksys.com/international/firmware.

________________________________________________________________________________________________________
Firmware 3.03.9
- Resolve issue with download of large size file failing before completion
- Updated help file

Firmware 3.03.1
- Updated wireless driver
- Supports hardware version 2.2 (cannot downgrade to previous versions)
- Resolves issue with VoIP adapters
- Resolves issue with long domain names
- Updated certificate generation for https access
- Resolves issue with disabling firewall
- Added QoS function
- Added Port Triggering function
- Added L2TP option for WAN connection type
- Added ability to back up and restore configuration files
- Added Wireless isolation function
- Added ability to filter internal NAT redirection
- Added ability to restrict access to web GUI from wireless clients
- Added ability to filter IDENT port 113
- Resolves issue with HeartBeat WAN connection
- Added support for 40/56bit cipher to support old browsers to use https
- Resolves issue with PPTP passthrough
- Changed WPA Group Key renewal time range to 600~7200 seconds
- Added IGMP proxy support
- Added ability to allow web GUI access only through https or http

Firmware 2.02.7
- Updated wireless driver to support all versions of WRT54G hardware
- Adds support to allow WAP54G connect as a repeater
- CTS protection mode set to disable by default to improve wireless performance in normal environments
- Resolved issue where the WLAN LED stays on even when wireless is disabled
- Resolved security vulnerability causing the web server in the router to crash

Firmware Version 1.42.2
- Updated wireless driver to 3.31.15
- Added URL and contents filters
- Added L2TP passthrough
- Added HeartBeat Signal support
- Updated GUI format and layout

NOTE:  AFTER UPGRADING TO 1.42.2 FIRMWARE YOU CAN'T ROLL BACK TO ANY PREVIOUS VERSIONS OF THE FIRMWARE FOR
       OLDER VERSIONS OF THE PRODUCT.  This firmware will not load on version 2 or higher.


Firmware Version 1.30.9
- Adds UI control to enable/disable frame bursting
- Resolves issue with firmware upgrade error in Internet Explorer 6.0.2800.1106.xpsp2.030422-1633, on Windows XP pro.
- Send 192.168.1.1 to disable DynDNS
- Resolves issue with using the 4th tx key for WEP
- Resolves issue with disconnecting PPPoE causing WPA to be disabled
- Resolved connect on demand issues with PPPoE


Firmware Version 1.30.1
- Adjust PPTP max MTU value from 1400 to 1460 
- The router is now certifiable for the UPnP logo
- Complies with final 802.11g standard
- Improved performance asymmetry between the transmit and receive paths
- Receive Broadcast packets from renew state. Some DHCP server (Dlink 300G+) send broadcast ACK after it 
  receives a REQUEST
- Fix: The firmware upgrade will fail, if DDNS updates while upgrading
- Fix: If first DNS address fails, the second or third DNS address will be used to resolve domain names
- Added the following items under Setup Page:	
    - Route Name
    - Manual Time Server
    - MAC PC's Clone
    - wireless domain
    - Security Settings 
- Added the following items under System Page
    - UPnP enable/disable
    - Ping Test and Traceroute
- Added the following items under Wireless Page
    - CTS Protection Mode
    - Basic Rate
- Added the following items under Status Page
    - Router Name
    - Start IP Address
    - End IP Address
- Added Wi-Fi Protected Access(TM) support including AES and TKIP encryption
- Resolves issue with Port Forwarding name showing up as garbage characters
- Added "B-Only" option to wireless modes
- Added "Default" option to Basic Rate settings

Firmware Version 1.02.1
- Incorporates updates found in the Draft IEEE 802.11g version 6.1 specification
- Resolves interoperability issues with legacy 802.11b devices under Mixed Mode 
- Resolves a performance bug where the performance in a mixed b, g network did not go up once the last b 
  client disassociated
- Resolves issue where WEP degrades performance
- Resolves issue with TZO DDNS Service 
- "Domain Name" replaces "name"
- TFTP server will only verify image file name "xxxx.bin"
- MAC Address Filter under the Advanced tab works on both wired and wireless clients
- Fixed a bug that prevented wireless clients from connecting to the Internet if there was no active wired
  PC (PPPoE customers in Europe and China only)
- Support for UPnP enabled applications such as MSN Messenger
- Fixed a bug that caused computers connected to the LAN ports to be dropped at some interval only to be 
  immediately re-connected
- Fixed Dynamic Routing issue between 2 Routers
- Allows User to name Static Route Configurations
- Modified PC List Web Page to avoid confusion
- Stabilized Wireless-G to LAN and WAN Throughput
- Stabilized Wireless-B to LAN and WAN Throughput
- Improved LAN-WAN Throughput

Firmware Ver.:	1.01
- Initial release