WET54GS5 Release Notes 

Version 4.91 02/24/2005 Fixed WPA TKIP Pre-share special ASCII key character,then couldn't correct setting.
Fixed WEP 64 special passphrase key,could be the device reset to factory default setting.
Fixed reset to factory's default seting,then web server couldn't be correct working.
 
Version 4.90 12/09/2004 Add support ETSI mode channel support
Fixed WPA TKIP Pre-share authentication,exchange share key connect fail issue
 
Version 4.85 4/1/2004 Change the default regular domain to US
Disable CPU port when booting to prevent CPU hanging caused by packets looping at boot time
 
Version 4.84 3/29/2004 Remove telnet server ( debug support) for formal release
 
Version 4.83 3/29/2004 Remove unneeded programs in f/w
Fixed cannot connect to device problem if loop detected under STP enabled
Fixed WEP pages error under adhoc mode
 
Version 4.81 3/24/2004 Modify switch's access list to disable button while adding new entry
Fixed default route not deleted when set router to 0.0.0.0 caused by buggy /bin/route, might need further debug on /bin/route 
 
Version 4.8 3/19/2004
 fixed setup wizard cannot detect our device after 30 minutes problem 
Version 4.7 3/15/2004
 updated help pages
Hunglin fix 802.1x problem and fixed port1 backdoor
fixed [force port vid] bug 
fixed SNMP trap daemon will crash when plug in all interfaces problem
add more check to web page for valid range and value 
Version 4.6 3/5/2004
 updated help pages 
 
Version 4.5 3/4/2004
 now generate 4 different WEP 128bit keys 
 
Version 4.4 3/4/2004
 change default username to admin instead of NULL and check username
fix Hunglin 802.1x mac clone problem
add close button to security window 
 
Version 4.3 3/2/2004
 fixed the "access list cannot delete when there is only one entry left" problem
add range check for STP 
change default QOS priority to high for non-wireless port 
 
Version 4.2 3/1/2004
 fix setup wizard cannot detect our box issue

 
Version 4.1 2/25/2004
 change QOS default to disable storm filtering
change access list to old way, I tried to enhance performance in previous version but did not work

 
Version 4.0 2/24/2004
 fix SNMP and RMON web page problem
add backdoor for 802.1x and access list on port 1
change to gzip and remove boot delay added to work around HW problem, since it's already fixed 
 
Version 3.9 2/23/2004
 add swutil 32,33 for setting Wireless Profile
GUI setting will trigger set_prismoid(DOT11_OID_PROFILES)
add b-only mode back 
 
Version 3.8 2/22/2004
 remove boot delay but still use slower bzip2 
merge with Hunglin's new security GUI and WPA fix
will not show buglist on GUI anymore 
 
Version 3.7 2/20/2004
 fixed a lot of GUI based on Chris's feedback 
fixed STP big packet problem using Onno's new MVC
fixed the mac address entering by checking there are 6 ":" check stp path cost or priority if they are in valid range 
 
Version 3.6 2/17/2004
 fixed ATU age timer setting problem 
change to a smaller boot delay around 8 second
power led will blink during upgrade
fixed 8021xrun bring up problem
kill 8021xrun, sysd and snmptraplog during upgrade 
 
Version 3.5
 change back to bzip2 kernel from gzip, the previous version did not fix it correctly 
add 10 second of delay before init net device to see if we can work around the hw problem 
 
Version 3.4
 update site survey and chkstatus wordings, mostly from WEP to security
fix leds and move all led function to islmvc driver
change back to bzip2 kernel from gzip, because gzip boot faster and cause problem update sysd and cybersupplicant in /etc/init.d/ 
 
Version 3.3
 add system up time in setup page 
change accesslist hash to XOR instead of + 
add per entry access list counter 
check WEP key to be not all NULL before commit 
change the QOS default to limit Flooded packets to 8MBps for all ports 
 
Version 3.2
 check password to be 5-12 in length 
link /usr/etc to /usr/local/ssl for WPA/WEP 
 
Version 3.1
 fixed incorrect SNMP trap message destination and make the trap recognizable to MG-SOFT 
fixed WEP page problem 
add customized mapping for QOS diff-serv and 802.1p
merge with Hunglin's WEP/WPA fix 
 
Version 3.0
 fix cannot adding snmp trap dest in IE bug 
better link trap message generation 
set the 802.1p QOS priority mapping to use the pri[2:1] bits and some QOS wording 
 
Version 2.9
 new snmpsenttrapd for sendning boot, link up/down trap 
wireless state LED 
Spanning Tree protocol changes, now 90% working except big packet(IP greater than 1496) 
mask out VLAN port based vector to disallow same port in/out
SWITCH-PORT web page change 
 
Version 2.8
 merge in Hunglin's 802.1x change 
add more check for valid mac address 
fix the bug that deleted static ATU entry still show in dynamic address table 
remove the wireless_cpu port from the to_port list in port monitoring
remove 3 semicolons in SW-PORT page 
 
Version 2.7
 fix static address table port vector display problem 
update to latest wet54gv2 GUI 
modify switch-RMON Counter GUI to display one port at a time, or the page will be messed up 
change static address table back to 256 entries
fix vlan 802.1q membership tag one more time
merge in sysd with Max's apdp.c change 
 
Version 2.6
 fix vlan member tag problem 
fix qos default port priority setting problem 
snmp trap generation is working now 
 
Version 2.5
 fix get next page in switch table 
fix port monitoring problem which enabled port monitoring for all ports incorrectly in v2.4 
 
Version 2.4
 update fixes from Max(aplock.c ebtnatwacher.c) but not Onno(br_input.c)
add SNMP web page for snmp trap destination, how snmp trap is not working yet
fix defects 1,4,5,8,9 filed by Tommy
multiple items in table can be delete together
disable 2 check boxes in VLAN port based setting so that port1 can always access the web page when port based vlan is enabled.

 
Version 2.1
 change default IP back to 192.168.1.226

 
Version 2.0
 Integrate WPA codes.
Fix sysd to disable socket reset, or web upgrade will timeout.
Add help pages for RMON, PORT and Access List
change default IP to 192.168.2.226

 
Version 1.6 
 Fix port 5 packets problem, caused by port monitoring code 
Add some switch help page
Full switch function except spanning tree
First official release to QA/PM/HW 

 

