WET54GS5 Release Notes
Linksys, A division of Cisco Systems Inc. 

Version 4.85 4/1/2004 

1.) Change the default regular domain to US
2.) Disable CPU port when booting to prevent CPU hanging caused by packets looping at boot time
 
Version 4.84 3/29/2004 

1.) Remove telnet server ( debug support) for formal release
 
Version 4.83 3/29/2004 

1.) Remove unneeded programs in f/w
2.) Fixed cannot connect to device problem if loop detected under STP enabled
3.) Fixed WEP pages error under adhoc mode
 
Version 4.81 3/24/2004 

1.) Modify switch's access list to disable button while adding new entry
2.) Fixed default route not deleted when set router to 0.0.0.0 caused by buggy /bin/route, might need further debug on /bin/route 
 
Version 4.8 3/19/2004

1.) Fixed setup wizard cannot detect our device after 30 minutes problem 

Version 4.7 3/15/2004

1.) Updated help pages
2.) Hunglin fix 802.1x problem and fixed port1 backdoor
3.) Fixed [force port vid] bug 
4.) Fixed SNMP trap daemon will crash when plug in all interfaces problem
5.) Added more check to web page for valid range and value 

Version 4.6 3/5/2004

1.) Updated help pages 
 
Version 4.5 3/4/2004

1.) Now generate 4 different WEP 128bit keys 
 
Version 4.4 3/4/2004

1.) Change default username to admin instead of NULL and check username
2.) Fixed 802.1x mac clone problem
3.) Add close button to security window 
 
Version 4.3 3/2/2004

1.) Fixed the "access list cannot delete when there is only one entry left" problem
2.) Added range check for STP 
3.) Changed default QOS priority to high for non-wireless port 
 
Version 4.2 3/1/2004

1.) Fixed setup wizard cannot detect the WET54GS5 issue

 
Version 4.1 2/25/2004

1.) Changed QOS default to disable storm filtering
2.) Changed access list to old way, I tried to enhance performance in previous version but did not work

 
Version 4.0 2/24/2004

1.) Fixed SNMP and RMON web page problem
2.) Added backdoor for 802.1x and access list on port 1
3.) Change to gzip and remove boot delay added to work around HW problem, since it's already fixed 
 
Version 3.9 2/23/2004
 
1.) add swutil 32,33 for setting Wireless Profile
2.) GUI setting will trigger set_prismoid(DOT11_OID_PROFILES)
3.) add b-only mode back 
 
Version 3.8 2/22/2004

1.) remove boot delay but still use slower bzip2 
2.) merge with Hunglin's new security GUI and WPA fix
3.) will not show buglist on GUI anymore 
 
Version 3.7 2/20/2004

1.) fixed a lot of GUI based on Chris's feedback 
2.) fixed STP big packet problem using Onno's new MVC
3.) fixed the mac address entering by checking there are 6 ":" check stp path cost or priority if they are in valid range 
 
Version 3.6 2/17/2004
 
1.) Fixed ATU age timer setting problem 
2.) change to a smaller boot delay around 8 second
power led will blink during upgrade
3.) fixed 8021xrun bring up problem
4.) kill 8021xrun, sysd and snmptraplog during upgrade 
 
