ReadMe.txt November 12, 2001.

This document applies to the firmware upgrade of the Linksys Wireless Access Point (WAP11).

The WAP11 version 1.4h.3 firmware has been upgraded to enhance features and performance.  Please see the VER.TXT file for a detailed list of updates.

The firmware upgrade utility may only be performed on a PC with USB support running Microsoft Windows 98, Windows Me, Windows 2000 or Windows XP.  


Installing and Executing the Firmware Upgrade software
------------------------------------------------------

1. Make sure the WAP11 is powered on.  The red LED on the front of the WAP11 will be on when the WAP11 is on.  If you have not already done so, connect the USB able to both the WAP11 and the PC from which you are performing the upgrade.  (If you are unsure how to connect this cable, refer to your User Guide.)  This upgrade may only be performed via the USB cable.  NOTE:  You may have to install the USB driver.  The drivers are located in the folder that you will choose on the next screen in the appropriate sub directory (e.g. Win9x or Win2000).

2. Follow the Wizard to complete the installation.  After the installation is complete, close any windows that may have been left open.  

3. The installation will place an icon "Upgrade firmware to 1.4h.3" on your Desktop.  You may launch the upgrade utility from this icon.  You may also launch the program from its folder Programs Linksys WAP11, and select "Linksys WAP11 USB Upgrade Firmware to 1.4h.3" program. 

4. The upgrade will begin and will show a status bar indicating its progress.

5. After the upgrade is complete, the status indicator will read:  Upgrade successful.  Click the Exit button to close the Upgrade Utility.  The new firmware is installed.


NOTE: If you get a message that the upgrade has not completed, or if the installation is interrupted for any reason, try turning the WAP11 off and on and running the upgrade utility again, beginning with Step 1.  


Updating Configuration Utilities:
---------------------------------  

If you are upgrading from firmware 1.3, you must also download and install the new Configuration Utilites from the Linksys Web site (utility 1.7d.2 or above) - http://www.linksys.com/download

If you are upgrading from 1.4x firmware, the current utility (1.7d.2) is compatible with all features in the new firmware.


