Linksys, A division of Cisco Systems, Inc.


Produkt/Product:                WAG54GS (Annex B)

Versionsdatum/Release Date: 	26 April 2007

Einteilung/Classification:      Firmware-Versionshistorie/
                                Firmware Release History

Firmware-Version:               1.01.01 (Annex B)

NOTE:  Not for use with Annex A models of the WAG54GS
__________________________________________________________________________

English
1.01.01
- Adds Setup Wizard Enable/Disable feature on UI
NOTE: Feature must be enabled to successfully run setup wizard to configure the gateway
- Fixes device reboot time
- Fixes issue with Daylight Savings Time setting for new D.S.T. dates
- Fixes issue with local IP address being the same as the WAN IP address
- Fixes issue with Security information disclosure for UDP port scan packet

1.01.00
- Adds SES button enable/disable feature to GUI
- Adds English, German, French GUI language configuration without firmware upgrade required
- Adds multiple language support with Setup Wizard
- Fixes issue with Remote Management function when WLAN Management is disabled
- Fixes issue with saving page without PPPoE/PPPoA username or password
- Fixes SES button color to show white when SES is configured

1.00.12
- Fixes issue with SES function causing configuration loss
- Added Incoming and Outgoing log to GUI
- Added ADSL Modulation drop-down list
- Added prompt for user to change gateway default password when enabling remote management
- Fixes time display for daylight savings time
- Fixes issue with SNMP display of device name
- Fixes issue with duplicate 128-bit WEP Keys when using Generate button
- Fixes issue with 64-bit WEP Key generating multiple keys via passphrase
- Fixes range require for MTU Size
- Fixes issue with PPTP Passthrough for multiple clients
- Fixes issue with DHCP response length
- Fixes issue with inactive Disconnect/Connect button on Status page


1.00.10
- With Web UI formatting updates

1.00.06
- Initial Release

General Notes: 
- This firmware is only for usage in Europe with Annex B 
  hardware version.  
- Disconnect all wireless clients from the Gateway during 
  the upgrade process.  Make sure no wireless clients 
  attempt to associate with the Gateway until the upgrade 
  process is complete.  



Deutsch
1.01.01
- See English Notes Above

1.01.00
- See English Notes Above

1.00.12
- See English Notes Above

1.00.10
- Mit Web-Benutzeroberflche Formatierung Aktualisierungen

1.00.06
- Ursprngliche Version

Allgemeine Hinweise
- Verwenden Sie diese Firmware nur in Europa mit Version 
  Annex B.
- Trennen Sie die Verbindungen aller Wireless-Clients mit 
  dem Gateway fr die Dauer der Aktualisierung.  Vergewissern 
  Sie sich, dass keiner der Wireless-Clients versucht, eine 
  Verbindung mit dem Gateway herzustellen, bevor der 
  Aktualisierungsvorgang abgeschlossen ist.



