﻿Linksys, A division of Cisco Systems, Inc.


Product:           WAG200G Annex-A 

Classification:    Firmware Release History

Release Date:      04 April, 2007

Firmware Version:  1.01.04 (ETSI)

Language:	   Multi-language

Note: Not to be used with Annex B models (DE and E1)
____________________________________________________________

1.01.04
- Fixes issue with incorrect upstream/downstream transmit power display on DSL Connection page
- Fixes issue with ATT VPN client not connecting to ATT VPN network
- Fixes issue with Security information disclosure for UDP port scan packet

1.01.03
Note: If doesn't self-reboot after upgrade, power off/on WAG200G

- Fixes issue with no disconnect button when GUI language is German
- Fixes issue with Remote Management when WLAN is disabled
- Fixes issue with email address not taking letters '.', '-', and '_'.
- Fixes issue with PPTP connection when PPTP is behind WAG200G
- Fixes issue with Add/Edit services for blocked services
- Fixes issue with DDNS status showing connecting.

1.01.01
Note: If upgrade from current firmware to v1.01.01 is not possible, upgrade to v1.00.09 first.

- Fixes issue with incorrect port range for blocked services
- Fixes issue with WAN DHCP request/offer packet length
- Fixes issue with error for overlapping ports entries on blocked services
- Fixes issue with WAN DHCP LCP echo request
- Fixes issue with Device automatically connecting to the Internet during startup when Connect on Demand is configured
- Fixes issue with WEP key range restriction not enforced
- Fixes issue with incorrect range restriction for MTU Size
- Fixes issue with Internet LED lit when WAN interface disconnected
- Fixes issue with WEP 128-bit generating only 1 WEP Key through pass-phrase
- Fixes issue with PPPoE Connect on Demand not disconnecting after idle timeout period
- Adds incoming and outgoing logs to display network activity
- Adds multiple language feature to firmware, which can be changed without firmware upgrade

1.00.09
- Multi-language DE-EN-FR firmware
- To upgrade from previous firmware versions
  1) Upgrade using firmware: WAG200G_V1.00.09_EN.img
  2) Upgrade using firmware: WAG200G_A_1.00.09_International.img

1.00.05
- Initial Release


General Notes: 
- This firmware is only for usage in Europe with WAG200G Annex A 
  hardware.  
- Disconnect all wireless clients from the Gateway during 
  the upgrade process. Make sure no wireless clients 
  attempt to associate with the Gateway until the upgrade 
  process is complete.  
