Linksys, A division of Cisco Systems, Inc.


Product:           WAG160N Annex A 

Classification:    Firmware Release History

Release Date:      09 Mar, 2009

Firmware Version:  1.00.12 (ETSI)

Language:	   Multi-language

Note: Not to be used with Annex B models (DE and E1)
____________________________________________________________

1.00.12
1. DownloadSpeedTest(), DUT web UI(port 80) will be inaccessible if set buffer size to a large number
2. v1.00.11, Wireless, Fail to find wireless SSID after set WPA password with "linksys" (7 chars)
3. GetWLanRadios() cannot return correct WideChannel information
4. GetDeviceSettings2() will return wrong country code for United Kingdom.
5. Fix bug that SIP call can not be initialized from WAN to LAN if the SIP
   Invite packet of the SIP Server doen??t include port information.
6. Atheros driver??s changelist from 6.1.1.98 to 6.1.1.111:
   - Add FCC6 for Australia and Canada 5GHz.
   - Fixed problem in broadcast performance.
   - Disabled power constraint element when country IE is enabled on 2.4GHz 
     channels since some stations will misunderstand the Power Constraint 
     element and cause tx power to be set incorrectly.
   - Re-enabled 11n NF periodic Calibration.
   - Fixed a problem where STA cannot reassociate to AP after beacon stuck & 
     HW reset.
   - Enhanced dynamic allocation of TID buffers on ADDBA.
   - Fixed throughput degradation issue during downstream TCP legacy 
     co-existence tests.
   - Addressed multiple BSSID performance issue.

1.00.11
1. GetPortMapping always returns an extra HEX value 0x10 in field
2. Disable QoS if user select Auto mode but didn't add any rules
3. Update wireless driver to 802_11-6.1.1.111
4. HNAP:DownloadSpeedTest accept invalid data
5. WAG160Nv1-EU-ANNEXA-ETSI-1.00.07(02)-code :GetDeviceSettings: Always get a NULL Device name :  <DeviceName></DeviceName>
6. HNAP SetRouterSettings: FW should not check remote management port if remote management is disabled, CBO, HNAP
7. HNAP SetWanSettings: FW allows a broadcast gateway address 12.254.169.255, CBO, HNAP
8. HNAP SetMACFilter2: FW allows a multicast MAC address FF:0B:DC:6F:FE:01, CBO, HNAP
9. HNAP SetMACFilter2: FW allows duplicated MAC addresses, CBO, HNAP
10. HNAP SetWanSettings: FW accepts blank PPPoE username with non-blank password, CBO, HNAP
11. Web administrator username should be case insensitive, CBO, username
12. FW writes settings back to flash when doing HNAP Getxxx actions, CBO, HNAP
13. HNAP SetWlanRadioSettings: FW returned "ERROR_BAD_WIDTH" when setting channel bandwidth 40, CBO, HNAP
14. DUT accepted all kinds of values from HNAP setDSLSettings request without verifying them first. DUT responsed "OK" to HNAP setDSLSettings request, which contains ilegally "xxx" as multiplexing value. DUT should reject this value with "ERROR" response. Same problem is with all other parameters in setDSLSettings request.
15. AddPortMapping takes invalid dataparameters in setDSLSettings request.
16. WAG160Nv1-EU-ANNEXA-ETSI-1.00.07(02), MAC SetupWinzard v4.9.8074.1, HNAP-GetWLanRadioSecurity:Set WPA/WPA2 key as all printable punctuations, but DUT reply error response when GetWLanRadioSecurity.It's a firmware bug.
17. Fix Bug upnp sometimes can not work


1.00.10
1. HNAP: FW writes settings back to flash when doing HNAP Getxxx.
2. Outbound SIP call dropped in 25 seconds at sipphone.com, CBO, SIP.
3. Web administrator username should be case insensitive, CBO, username 
4. HNAP SetMACFilter2: FW allows a multicast MAC address FF:0B:DC:6F:FE:01, CBO, HNAPHnap wireless channel issue
5. HNAP SetMACFilter2: FW allows duplicated MAC addresses, CBO, HNAP
6. HNAP SetWlanRadioSettings: FW returned "ERROR_BAD_WIDTH" when setting channel bandwidth 40, CBO, HNAP
7. HNAP SetRouterSettings: FW should not check remote management port if remote management is disabled, CBO, HNAP
8. HNAP SetWanSettings: FW allows a broadcast gateway address 12.254.169.255, CBO, HNAP
9. HNAP SetWanSettings: FW accepts blank PPPoE username with non-blank password, CBO, HNAP
10. DUT should be in WPA2-Mixed mode after WPA/WPA2 configuration by setup wizard, CBO, Setup Wiard


1.00.09
- Fixes issue with FTP failure after 2 days
- Fixes issue with Cisco IPSec client
- Fixes issue with slowdown when using Azureus in MAC OS
- Fixes issue with SIP registeration when WAN IP Address changes
- Fixes issue with WUSB300N client over WPA-TKIP
- Change GUI display

1.00.07
- Initial Release


General Notes: 
- This firmware is only for usage in Europe with WAG160N Annex A 
  hardware.  

