RVL200 Firmware v1.0.14 Release Note

New Features:
1. IPSec Local/Remote Security Gateway Type now supports
       IP+FQDN
       IP+E-mail
       Dynamic IP+ FQDN
       Dynamic IP+ E-mail
2. PPPoE WAN configuration now includes Retry Times and Redial Period in the Web UI.

Issues Fixed:	
1. Fixed the issue of pop-up warning of expired certificate when users install the Virtual Passage adapter.
2. The SNMP MIB "ifSpeed" now shows the real speed of the LAN interface. 
3. Fixed the issue that browsing Web UI sometimes shows "502 Bad Gateway".
4. Fixed the issue that SSL VPN users cannot use the TFTP service on RVL200 LAN side after SSL VPN tunnel is established

Known Issues:
1. PPPoE connection will fail to establish when the PPPoE username contains a # sign	
2. The firewall status (SPI/DoS/BlockWANRequest/RemoteManagement) is not shown correctly in the System Summary page when the firewall is disabled. The correct status should be off/off/off/on. 	

**In case users failed to upgrade the firmware via Web UI and the DIAG LED is blinking, users can use a TFTP utility (RVL200_1.0.13.exe) to recover the device and then use the Web UI to upgrade the firmware to the latest version.  
