RV082 Firmware v1.3.3.6 Release Note

There are two firmware systems used by RV082. One is firmware v1.3.x which uses the newer Intel CSR1.2.2. The other is firmware v1.1.x which uses the original Intel CSR1.1. The look and feel are quite similar, however, the v1.3.x firmware provides more features and better performance than v1.1.x. For example, the NAT firewall throughput has reached 200Mbps (bi-directional wire speed) and the IPSec throughput (3DES) has a maximum over 90Mbps. You can upgrade or downgrade the firmware on your RV082 device whenever you want. But be warned that downgrading firmware will restore the configuration to factory default. Users have to manually configure the router after firmware downgrade. 
***Importing configuration file exported from firmware 1.3.x into firmware 1.1.x will damage the router.***  

Fixes:

1. Fixed the "TCP Window Scaling" issue with Windows Vista.
2. The maximum number of Static IP entries on DHCP->Setup page was increased from 100 to 253.
3. The help page of the DHCP->Setup page has been updated to include the instructions to enable "MAC Filtering" using the DHCP->Static IP list.
4. Support the SNMP link-up/link-down traps on all of the WAN and LAN ports. In the previous firmware, the link-up/link-down traps were supported on WAN ports only. In a snmp-trap frame, the port number is indicated in the field "specified trap type" which was defined as the following.

Specified Trap Type           Specified Port				
1                             LAN port 1			
2                             LAN port 2			
3                             LAN port 3			
4                             LAN port 4			
5                             LAN port 5		
6                             LAN port 6			
7                             LAN port 7			
8                             LAN port 8			
129 (0x81)                    WAN port 1			
130 (0x82)                    WAN port 2 /DMZ	

Known Issues:

1. Changed the DHCP Server implementation. When the DHCP client requests the IP address of DNS server, RV082 will offer the one obtained from ISP. (In previous firmware, RV082 offers its LAN IP as the DNS server's IP address.) However, if users configure a DNS server in the LAN and specify the IP address of the local DNS server on the Web UI, RV082 does not offer the local DNS server's IP address to the requesting DHCP clients.

