Linksys- A Division of Cisco System, Inc.

Firmware Date	 : January 15th 2004
Current Firmware : Version 1.0.11
Product Part No  : RV082
----------------------

RV082 Firmware Revision History


v1.0.11		2004/01/15
1.	Support "NAT Loopback" functionality. 
	Purpose: It allows LAN-side users accessing LAN-side server by 
	typing WAN IP address.
2. 	Support IPSec interoperability with SSH Sentinel VPN Client in both Main and 			Aggressive modes.  Purpose: It allows users using SSH client to connect to RV082 		through Group VPN tunnel(Aggressive mode).
	Note: Older firmware worked with SSH only in Main mode. 
3.	Web-UI modification:
	Added 3 pre-defined service ports, PPTP(1723), IPSec(500) and 
	L2TP(1701), in Service list on the "Setup -> Forwarding" screen.
	Purpose: It allows user to host PPTP server at LAN network by   	   	configuring this Forwarding page.


v1.0.10		2004/01/06
1.	Support NetBIOS over IPSec functionality
2.	Web-UI modification:
	Added NetBIOS broadcast option on VPN Advanced page.
	Note: the default setting is Disabled
	Modified on-line help contents for NetBIOS broadcast option

v1.0.9		2004/01/01

1.	Fixed following Web-UI bug that only existed in v1.0.8:
	On DHCP Setup page, DHCP server can not be disabled

2.	Web-UI modification:
	Added on-line Help contents about Microsoft XP/2000 VPN Client on Client to 			Gateway(Group VPN) help page.


v1.0.8		2003/12/24

1.	Web-UI modification: Add Static IP setting on DHCP Setup page. 
	Add DNS Server setting on DHCP Setup page.
	Add Microsoft XP/2000 VPN Client option on VPN Client to Gateway GroupVPN 			setting page.	

		Note: This option is used for Dynamic IP (e.g. PPPoE or DHCP) users which 		using Microsoft VPN client. The difference between Microsoft and other VPN client 		is that Microsoft client does not support Aggressive mode and FQDN/UserFQDN ID 			options. Add/Modify on-line Help contents on DHCP and Port Management pages.


v1.0.7		2003/12/02

1.	Modified the UPnP function for passing the test of UPnP Certification Test 
	Tool

v1.0.6		2003/11/26

1.	Solved an IPSec interoperability problem with Cisco VPN Concentrator. To accept 		more UDP/TCP ports when IKE Phase-1 negotiation
2.	Solved a problem that some kind of PPPoE password may be saved as incorrect value 		under Windows2000/98 environment. 
3.	Fixed a bug that SNMP sysUpTime did not report the correct time.
4.	Web-UI modification:
	Enlarge the max. length of PPPoE username/password settings from 20 to 60 			characters
	On Advanced Routing page, allow users to modify the value of Destination IP on 		exist entry. (This style are applied on all of the pages which use Add to list 		button)
5.	DHCP server modification: 
	Do not assign unused IP address to client

v1.0.3		2003/10/17

1.	Add internal check points for auto-test use. It is only used at manufacturing 	stage.
2.	Change the default snmp sysName from RV082_<random mac> to RV082_<LAN_mac>
3.	Initialize the phrase of snmp sysDescr as RV082 VPN Router

v1.0.2		2003/10/09

1.	On System Log page, enlarge the acceptable range of the Log Time Threshold value 	from 10~120 to 10~10080 minutes
2.	Change the string of Log-Alarm email subject from SME100 Security Notification to 	<Host Name> Security Notification
3.	Support IPSec Connect-on-demand function even on the tunnel over PPPoE interface.
4.	Modify software internally in order to enhance the system performance and 	reliability
5.	Support generic Watchdog function
6.	Update the on-line help
7.	Remove VPN Wizard

v1.0.0		2003/09/24

1.	For solving a Web-UI page handling problem, removed the link of internal Cookie in 	VPN Summary page.
2.	Do not need restore settings to default value after upgrading firmware. 
3.	Web-UI modification:
	Allow user to save configuration even if empty Host Name or Domain Name.
	Add a Group VPN Tunnel Test field in VPN Summary page
 
         -  Add Disconnect button in Tunnel Test field when the tunnel is connected. 
 
