Linksys EG1032 v3 Instant Gigabit Desktop Network Adapter Driver

          Linksys, A Division of Cisco System, Inc.
=================================================================

1. Installation

When installing the VLM package for DOS follow the steps below to
install EG1032v3.COM:

1.  Start the Netware Client Installation.
2.  Start the dialog for choosing the driver for your network adapter.
3.  Select "OTHER DRIVERS".
4.  Enter the path where the files EG1032v3.COM is located.
5.  Select "Linksys EG1032 v3 Instant Gigabit Desktop Network Adapter".
6.  In the following setup dialog choose your "Frame Type" and the
    other parameters.
8.  After savig the setup with <F10>, the driver gets installed.
9.  Finish the installation of the Netware Client Installation.
10. You can modify the driver parameters later as described in the next
    section.
***


2. Sample Installation/Configuration:

Sample startnet.bat (in the nwclient installation directory):

    SET NWLANGUAGE=ENGLISH
    C:\NWCLIENT\LSL.COM
    C:\NWCLIENT\EG1032v3.COM
    C:\NWCLIENT\IPXODI.COM
    C:\NWCLIENT\VLM.EXE

Sample net.cfg (in the nwclient installation directory):

       Link Driver EG1032v3.COM
       FRAME ETHERNET_802.2
       BUSNUM 2
       DEVNUM 1
