ReadMe.txt October 23, 2001.

This document applies to the firmware upgrade of the Linksys Wireless 
Access Point with Router (BEFW11S4).

The BEFW11S4 1.39.2 firmware has been upgraded to enhance features and 
performance.  Please see the VER.TXT file for a detailed list of updates.

==================================================================

Limitations:

Known bugs or features not implemented are:

1.)  The auto state of setting longPreamble and shortPreamble in the 
Configuration Record cnfPreamble is not supported.  

2.)  802.11 PCF operation is not implemented.

3.)  Although WEP is functional at 11MBps, there is significant performance 
degradation when using WEP at this rate.

------------------------------------------------------------------

RELEASE HISTORY:

1.)  Reports a major/minor version of 1.1 with a variant of 1 when the 
Secondary Functions firmware ID RID (RID FD20) is queried.

2.)  Secondary supplier compatibility range (RID FD21) has a bottom to top 
range of [1-6].

3.)  Fixed TI#233:  Short beacon intervals cause STA to report poor link 
quality.

4.)  Fixed TI#245:  Shared Key Authentication does not work on AP when Host 
Authentication is not enabled.  

5.)  Corrected a jamming condition caused by a continuous beacon 
transmission.  

6.)  Corrected a stall condition due to unrecognized control frames.

7.)  Corrected a situation that could cause the TIM to be incorrect in 
beacons.

8.)  Corrected several conditions that would casue the AP to either hang, 
or not respond to any stations while continuing to beacon when managing power 
save stations.

