V1.19.05 : 11/14/2008
ADSL
Change ADSL datapump to v7.4.3.0.

V1.19.01 : 05/23/2007
ADSL
Change ADSL datapump to v7.2.3.0.

Config
Add support of config preservation after upgrading firmware.

Config 
Add support of config backup & restore.

System
Add system up time in Status->Modem page.

PPP Half Bridge
Automatically disable Local DHCP Server when PPP half bridge is enabled, and WAN does not get IP address yet.

V1.19.00
Auto-hunting
Reboot-not-required when testing VPI/VCI pairs.

Advanced Routing
Add NAT enable/disable radio buttons in Advanced Routing page

Advanced Routing
Remove Javascript check for name of static route.

Router
Automatically disable and grey out Local DHCP Server when Bridge Mode Only is selected.

V1.17.01
Web UI
In Status->Modem, add PVC connection information.

PPPoA/PPPoE
Add support for PPP half bridge.

V1.12
ADSL
Add enable/disable configuration for auto search VPI/VCI. And change VPI/VCI search list to 0/32, 0/35, 0/100, 1/32, 8/35, 0/43, 0/51, 0/59, 8/43, 8/51, 8/59, 1/1, 0/33, 0/34.

Before V1.12
ADSL
Auto search VPI/VCI
Search VPI/VCI List : 0/32, 0/35, 0/100, 1/32, 8/35, 1/1, 0/33, 0/34.
The Auto Search only executes at the first time training after device reboot.
TI Datapump
D6.00.02.00A
To consolidate both Annex A & B in this version
Debug Message
Add ADSL training messages for debug purpose
Need serial/console cable
