------------------------------------------------------------------------------ ------------------------------------------------------------------------------ -- -- Copyright (c) 2002-2012 Intel Corporation. All Rights Reserved. -- -- Reproduction of this document is authorized on condition that this -- copyright notice is included. This ICS CHASSIS NOTIFICATION MIB embodies -- proprietary intellectual property of Intel Corporation (Intel). -- Intel retains all title and ownership in the specification, including -- any revisions. -- -- It is the intent of Intel to encourage the widespread use of this -- specification in connection with the management of Intel products. -- Intel grants vendors, end-users, and other interested parties a -- non-exclusive license to use this specification in connection with the -- management of Intel products. -- -- This specification is supplied "AS IS", and Intel makes no warranty, -- either express or implied, as to the use, operations, condition, -- or performance of this specification. -- ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ ICS-CHASSIS-NOTIFICATION-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Unsigned32, Counter32 FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF icsChassisSlotIndex, icsChassisSystemUnitIndex, icsChassisSlotCardType, icsChassisPortIndex, icsChassisPortType, icsChassisSystemUnitIndex, icsChassisPowerSupplyIndex, icsChassisFanIndex, icsChassisSensorSlotIndex, icsChassisSensorSystemUnitIndex, icsChassisSensorSystemUnitType, icsChassisSensorSlotType --icsChassisMib FROM ICS-CHASSIS-MIB chassis FROM ICS-MASTER-MIB; icsChassisNotificationMib MODULE-IDENTITY LAST-UPDATED "200204050002Z" -- April 5, 2002 ORGANIZATION "Intel Corporation" CONTACT-INFO "Intel Corporation. E-mail: ibsupport@intel.com" DESCRIPTION "ICS Chassis Notification MIB definition." REVISION "200204050002Z" -- April 5, 2002 DESCRIPTION "Initial MIB creation." ::= { chassis 2 } ------------------------------------------------------------------------------ -- Groups in the ICS Chassis Notification MIB ------------------------------------------------------------------------------ icsChassisTraps OBJECT IDENTIFIER ::= { icsChassisNotificationMib 1 } icsChassisTrapControlGroup OBJECT IDENTIFIER ::= { icsChassisTraps 1 } icsChassisSystemTrapsGroup OBJECT IDENTIFIER ::= { icsChassisTraps 2 } icsChassisSlotTrapsGroup OBJECT IDENTIFIER ::= { icsChassisTraps 3 } icsChassisPortTrapsGroup OBJECT IDENTIFIER ::= { icsChassisTraps 4 } icsChassisPowerTrapsGroup OBJECT IDENTIFIER ::= { icsChassisTraps 5 } icsChassisTemperatureTrapsGroup OBJECT IDENTIFIER ::= { icsChassisTraps 6 } icsChassisFanTrapsGroup OBJECT IDENTIFIER ::= { icsChassisTraps 7 } icsChassisBackplaneTrapsGroup OBJECT IDENTIFIER ::= { icsChassisTraps 8 } icsChassisSensorTrapsGroup OBJECT IDENTIFIER ::= { icsChassisTraps 9 } -- icsChassisFirmwareTrapsGroup OBJECT IDENTIFIER ::= { icsChassisTraps 10 } icsChassisTrapMibConformance OBJECT IDENTIFIER ::= { icsChassisNotificationMib 3 } icsChassisTrapMibGroups OBJECT IDENTIFIER ::= { icsChassisTrapMibConformance 1 } icsChassisTrapMibCompliances OBJECT IDENTIFIER ::= { icsChassisTrapMibConformance 2 } ------------------------------------------------------------------------------ -- -- ICS Chassis Trap System Group: -- Implementation of the Trap System group is mandatory for all ICS -- chassis products. -- ------------------------------------------------------------------------------ -- -- -- General system related trap control definition -- icsChassisTrapSystemControl OBJECT-TYPE SYNTAX BITS { icsChassisTrapSystemSelfTestFailure(0), icsChassisTrapSystemReboot(1), icsChassisTrapSystemMgmtSrvcStarted(2), icsChassisTrapSystemMgmtSrvcAborted(3), icsChassisTrapSystemSwitchFailover(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The object is used to enable system related traps of the chassis. From left to right, the set bit indicates the corresponding trap is enabled. If the bit is zero, the corresponding trap is disabled." ::= { icsChassisTrapControlGroup 1 } -- -- Slot related trap control definition -- icsChassisTrapSlotControl OBJECT-TYPE SYNTAX BITS { icsChassisTrapModuleNotResponding(0), icsChassisTrapModuleInserted(1), icsChassisTrapModuleRemoved(2), icsChassisTrapModuleFailed(3), icsChassisTrapModuleSelfTestFailure(4), icsChassisTrapModuleEEPROMReadFailure(5), icsChassisTrapModuleFPGAReadFailure(6), icsChassisTrapModuleBulkPowerFailure(7), icsChassisTrapModuleReboot(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The object is used to enable slot related traps of the chassis. From left to right, the set bit indicates the corresponding trap is enabled. If the bit is zero, the corresponding trap is disabled." ::= { icsChassisTrapControlGroup 2 } -- -- Port related trap control definition -- icsChassisTrapPortControl OBJECT-TYPE SYNTAX BITS { icsChassisTrapPortFailed(0), icsChassisTrapPortErrorRateHigh(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The object is used to enable port related traps of the chassis. From left to right, the set bit indicates the corresponding trap is enabled. If the bit is zero, the corresponding trap is disabled." ::= { icsChassisTrapControlGroup 3 } -- -- Power related trap control definition -- icsChassisTrapPowerControl OBJECT-TYPE SYNTAX BITS { icsChassisTrapPowerSupplyNotResponding(0), icsChassisTrapPowerSupplyInserted(1), icsChassisTrapPowerSupplyRemoved(2), icsChassisTrapPowerSupplyFailed(3), icsChassisTrapPowerSupplyEEPROMReadFailure(4), icsChassisTrapPowerSupplyFanFailed(5), icsChassisTrapPowerSupplyRedundancyLost(6), icsChassisTrapPowerSupplyRedundancyAvailable(7), icsChassisTrapPowerSupplyMinimumRequirementNotMet(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The object is used to enable power related traps of the chassis. From left to right, the set bit indicates the corresponding trap is enabled. If the bit is zero, the corresponding trap is disabled." ::= { icsChassisTrapControlGroup 4 } -- -- Temperature related trap control definition -- icsChassisTrapTemperatureControl OBJECT-TYPE SYNTAX BITS { icsChassisTrapChassisTemperatureHigh(0) } MAX-ACCESS read-write STATUS current DESCRIPTION "The object is used to enable temperature related traps of the chassis. From left to right, the set bit indicates the corresponding trap is enabled. If the bit is zero, the corresponding trap is disabled." ::= { icsChassisTrapControlGroup 5 } -- -- Fan related trap control definition -- icsChassisTrapFanControl OBJECT-TYPE SYNTAX BITS { icsChassisTrapFanNotResponding(0), icsChassisTrapFanTrayInserted(1), icsChassisTrapFanTrayRemoved(2), icsChassisTrapFanFailed(3), icsChassisTrapFanTrayEEPROMReadFailure(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The object is used to enable fan related traps of the chassis. From left to right, the set bit indicates the corresponding trap is enabled. If the bit is zero, the corresponding trap is disabled." ::= { icsChassisTrapControlGroup 6 } -- -- Backplane related trap control definition -- icsChassisTrapBackplaneControl OBJECT-TYPE SYNTAX BITS { icsChassisTrapBpEEPROMReadFailure(0), icsChassisTrapBpIbmlDeviceAccessFailure(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The object is used to enable backplane related traps of the chassis. From left to right, the set bit indicates the corresponding trap is enabled. If the bit is zero, the corresponding trap is disabled." ::= { icsChassisTrapControlGroup 7 } -- -- Sensor related trap control definition -- icsChassisTrapSensorControl OBJECT-TYPE SYNTAX BITS { icsChassisTrapSensorSystemUnitFailed(0), icsChassisTrapSensorModuleFailed(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The object is used to enable sensor related traps of the chassis. From left to right, the set bit indicates the corresponding trap is enabled. If the bit is zero, the corresponding trap is disabled." ::= { icsChassisTrapControlGroup 8 } ------------------------------------------------------------------------------ -- -- ICS Chassis Trap System Group: -- Implementation of the Trap System group is mandatory for all ICS -- chassis products. -- ------------------------------------------------------------------------------ -- icsChassisTrapSystemSelfTestFailure NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisSlotIndex } STATUS current DESCRIPTION "This trap indicates, that the chassis failed one or more of its self-test." ::= { icsChassisSystemTrapsGroup 1 } icsChassisTrapSystemReboot NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisSlotIndex } STATUS current DESCRIPTION "This trap indicates that the chassis is in the process of rebooting." ::= { icsChassisSystemTrapsGroup 2 } icsChassisTrapSystemMgmtSrvcStarted NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisSlotIndex } STATUS current DESCRIPTION "This trap indicates, that the internal service used to support the management of the chassis is operational." ::= { icsChassisSystemTrapsGroup 3 } icsChassisTrapSystemMgmtSrvcAborted NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisSlotIndex } STATUS current DESCRIPTION "This trap indicates, that the internal service used to support the management of the chassis has terminated abnormally." ::= { icsChassisSystemTrapsGroup 4 } icsChassisTrapSystemSwitchFailover NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisSlotIndex } STATUS current DESCRIPTION "This trap indicates that the we've failed over from one switch in the chassis to the other." ::= { icsChassisSystemTrapsGroup 5 } -- -- -- ------------------------------------------------------------------------------ -- -- ICS Chassis Trap Slot Group: -- Implementation of the Trap Slot group is mandatory for all ICS -- chassis products. -- ------------------------------------------------------------------------------ -- icsChassisTrapModuleNotResponding NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisSlotIndex, icsChassisSlotCardType } STATUS current DESCRIPTION "This trap indicates that a module is not responding to heart-beat poll requests, that are issued by the internal chassis management service." ::= { icsChassisSlotTrapsGroup 1 } icsChassisTrapModuleInserted NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisSlotIndex, icsChassisSlotCardType } STATUS current DESCRIPTION "This trap indicates that a module was inserted into the chassis." ::= { icsChassisSlotTrapsGroup 2 } icsChassisTrapModuleRemoved NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisSlotIndex, icsChassisSlotCardType } STATUS current DESCRIPTION "This trap indicates that a module was removed from the chassis." ::= { icsChassisSlotTrapsGroup 3 } icsChassisTrapModuleFailed NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisSlotIndex, icsChassisSlotCardType } STATUS current DESCRIPTION "This trap indicates that a module has failed and is not operational." ::= { icsChassisSlotTrapsGroup 4 } icsChassisTrapModuleSelfTestFailure NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisSlotIndex, icsChassisSlotCardType } STATUS current DESCRIPTION "This trap indicates, that the module failed one or more of its self-test." ::= { icsChassisSlotTrapsGroup 5 } icsChassisTrapModuleEEPROMReadFailure NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisSlotIndex, icsChassisSlotCardType } STATUS current DESCRIPTION "This trap indicates, that an error condition was encountered when reading the EEPROM of the module." ::= { icsChassisSlotTrapsGroup 6 } icsChassisTrapModuleFPGAReadFailure NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisSlotIndex, icsChassisSlotCardType } STATUS current DESCRIPTION "This trap indicates, that an error condition was encountered when reading the FPGA of the module." ::= { icsChassisSlotTrapsGroup 7 } icsChassisTrapModuleBulkPowerFailure NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisSlotIndex, icsChassisSlotCardType } STATUS current DESCRIPTION "This trap indicates, that the bulk power used by a module has failed within the chassis." ::= { icsChassisSlotTrapsGroup 8 } icsChassisTrapModuleReboot NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisSlotIndex, icsChassisSlotCardType } STATUS current DESCRIPTION "This trap indicates the module rebooted." ::= { icsChassisSlotTrapsGroup 9 } ------------------------------------------------------------------------------ -- -- ICS Chassis Trap Port Group: -- Implementation of the Trap Port group is mandatory for all ICS -- chassis products. -- ------------------------------------------------------------------------------ -- icsChassisTrapPortFailed NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisSlotIndex, icsChassisPortIndex, icsChassisPortType } STATUS current DESCRIPTION "This trap indicates that a port has failed and is not operational." ::= { icsChassisPortTrapsGroup 1 } icsChassisTrapPortErrorRateHigh NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisSlotIndex, icsChassisPortIndex, icsChassisPortType } STATUS current DESCRIPTION "This trap indicates that the error rate estimates for a port, is above the threshold value set by the customer." ::= { icsChassisPortTrapsGroup 2 } ------------------------------------------------------------------------------ -- -- ICS Chassis Trap Power Group: -- Implementation of the Trap Power group is mandatory for all ICS -- chassis products. -- ------------------------------------------------------------------------------ -- icsChassisTrapPowerSupplyNotResponding NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisPowerSupplyIndex } STATUS current DESCRIPTION "This trap indicates that a power supply is not responding to heart-beat poll requests, that are issued by the internal chassis management service." ::= { icsChassisPowerTrapsGroup 1 } icsChassisTrapPowerSupplyInserted NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisPowerSupplyIndex } STATUS current DESCRIPTION "This trap indicates that a power supply was inserted into the chassis." ::= { icsChassisPowerTrapsGroup 2 } icsChassisTrapPowerSupplyRemoved NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisPowerSupplyIndex } STATUS current DESCRIPTION "This trap indicates that a power supply was removed from the chassis." ::= { icsChassisPowerTrapsGroup 3 } icsChassisTrapPowerSupplyFailed NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisPowerSupplyIndex } STATUS current DESCRIPTION "This trap indicates that a power supply has failed and is not operational." ::= { icsChassisPowerTrapsGroup 4 } icsChassisTrapPowerSupplyEEPROMReadFailure NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisPowerSupplyIndex } STATUS current DESCRIPTION "This trap indicates, that an error condition was encountered when reading the EEPROM of the power supply." ::= { icsChassisPowerTrapsGroup 5 } icsChassisTrapPowerSupplyFanFailed NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisPowerSupplyIndex } STATUS current DESCRIPTION "This trap indicates that a fan has failed and is not operational." ::= { icsChassisPowerTrapsGroup 6 } icsChassisTrapPowerSupplyRedundancyLost NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex } STATUS current DESCRIPTION "This trap indicates that the chassis does not have redundant power." ::= { icsChassisPowerTrapsGroup 7 } icsChassisTrapPowerSupplyRedundancyAvailable NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex } STATUS current DESCRIPTION "This trap indicates that the chassis now has redundant power available." ::= { icsChassisPowerTrapsGroup 8 } icsChassisTrapPowerSupplyMinimumRequirementNotMet NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex } STATUS current DESCRIPTION "This trap indicates that the chassis does not have enough power supplies online to meet the minimum requirement." ::= { icsChassisPowerTrapsGroup 9 } ------------------------------------------------------------------------------ -- -- ICS Chassis Trap Temperature Group: -- Implementation of the Trap Temperature group is mandatory for all ICS -- chassis products. -- ------------------------------------------------------------------------------ -- icsChassisTrapChassisTemperatureHigh NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex } STATUS current DESCRIPTION "This trap indicates, that the temperature of the chassis has exceeded the temperature limit set by the administrator." ::= { icsChassisTemperatureTrapsGroup 1 } ------------------------------------------------------------------------------ -- -- ICS Chassis Trap Fan Group: -- Implementation of the Trap Fan group is mandatory for all ICS -- chassis products. -- ------------------------------------------------------------------------------ -- icsChassisTrapFanNotResponding NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisFanIndex } STATUS current DESCRIPTION "This trap indicates that a fan is not responding to heart-beat poll requests, that are issued by the internal chassis management service." ::= { icsChassisFanTrapsGroup 1 } icsChassisTrapFanTrayInserted NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisFanIndex } STATUS current DESCRIPTION "This trap indicates that a fan was inserted into the chassis." ::= { icsChassisFanTrapsGroup 2 } icsChassisTrapFanTrayRemoved NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisFanIndex } STATUS current DESCRIPTION "This trap indicates that a fan was removed from the chassis." ::= { icsChassisFanTrapsGroup 3 } icsChassisTrapFanFailed NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisFanIndex } STATUS current DESCRIPTION "This trap indicates that a fan has failed and is not operational." ::= { icsChassisFanTrapsGroup 4 } icsChassisTrapFanTrayEEPROMReadFailure NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisFanIndex } STATUS current DESCRIPTION "This trap indicates, that an error condition was encountered when reading the EEPROM of the fan tray." ::= { icsChassisFanTrapsGroup 5 } ------------------------------------------------------------------------------ -- -- ICS Chassis Trap Backplane Group: -- Implementation of the Trap Backplane group is mandatory for all ICS -- chassis products. -- ------------------------------------------------------------------------------ -- -- icsChassisTrapBpEEPROMReadFailure NOTIFICATION-TYPE -- OBJECTS { -- } -- STATUS current -- DESCRIPTION -- "This trap indicates, that an error condition was encountered -- when reading the EEPROM of the backplane. Note, currently there -- are two EEPROMs supported for the backplane of the chassis." -- ::= { icsChassisBackplaneTrapsGroup 1 } -- -- icsChassisTrapBpIbmlDeviceAccessFailure NOTIFICATION-TYPE -- OBJECTS { -- } -- STATUS current -- DESCRIPTION -- "This trap indicates, that an error condition was encountered -- when attempting to access a device in the chassis via IB-ML." -- ::= { icsChassisBackplaneTrapsGroup 2 } -- ------------------------------------------------------------------------------ -- -- ICS Chassis Trap Sensor Group: -- Implementation of the Trap Sensor group is mandatory for all ICS -- chassis products. -- ------------------------------------------------------------------------------ -- icsChassisTrapSensorSystemUnitFailed NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisSensorSystemUnitIndex, icsChassisSensorSystemUnitType } STATUS current DESCRIPTION "This trap indicates that a sensor associated with a system unit (i.e., fan tray, power supply, etc.) has failed and is not operational." ::= { icsChassisSensorTrapsGroup 1 } icsChassisTrapSensorModuleFailed NOTIFICATION-TYPE OBJECTS { icsChassisSystemUnitIndex, icsChassisSlotIndex, icsChassisSensorSlotIndex, icsChassisSensorSlotType } STATUS current DESCRIPTION "This trap indicates that a sensor associated with a module in a slot has failed and is not operational." ::= { icsChassisSensorTrapsGroup 2 } ------------------------------------------------------------------------------ -- conformance information ------------------------------------------------------------------------------ -- -------------------------------------------------------------------------- -- units of conformance -- -------------------------------------------------------------------------- -- icsChassisTrapControlGroupConformance OBJECT-GROUP -- OBJECTS { -- } -- STATUS current -- DESCRIPTION -- "Conformance group definition for the icsChassisTrapControlGroup" -- ::= { icsChassisTrapMibGroups 1 } icsChassisSystemTrapsGroupConformance OBJECT-GROUP OBJECTS { icsChassisTrapSystemControl } STATUS current DESCRIPTION "Conformance group definition for the icsChassisSystemTrapsGroup" ::= { icsChassisTrapMibGroups 2 } icsChassisSlotTrapsGroupConformance OBJECT-GROUP OBJECTS { icsChassisTrapSlotControl } STATUS current DESCRIPTION "Conformance group definition for the icsChassisSlotTrapsGroup" ::= { icsChassisTrapMibGroups 3 } icsChassisPortTrapsGroupConformance OBJECT-GROUP OBJECTS { icsChassisTrapPortControl } STATUS current DESCRIPTION "Conformance group definition for the icsChassisPortTrapsGroup" ::= { icsChassisTrapMibGroups 4 } icsChassisPowerTrapsGroupConformance OBJECT-GROUP OBJECTS { icsChassisTrapPowerControl } STATUS current DESCRIPTION "Conformance group definition for the icsChassisPowerTrapsGroup" ::= { icsChassisTrapMibGroups 5 } icsChassisTemperatureTrapsGroupConformance OBJECT-GROUP OBJECTS { icsChassisTrapTemperatureControl } STATUS current DESCRIPTION "Conformance group definition for the icsChassisTemperatureTrapsGroup" ::= { icsChassisTrapMibGroups 6 } icsChassisFanTrapsGroupConformance OBJECT-GROUP OBJECTS { icsChassisTrapFanControl } STATUS current DESCRIPTION "Conformance group definition for the icsChassisFanTrapsGroup" ::= { icsChassisTrapMibGroups 7 } icsChassisBackplaneTrapsGroupConformance OBJECT-GROUP OBJECTS { icsChassisTrapBackplaneControl } STATUS current DESCRIPTION "Conformance group definition for the icsChassisBackplaneTrapsGroup" ::= { icsChassisTrapMibGroups 8 } icsChassisSensorTrapsGroupConformance OBJECT-GROUP OBJECTS { icsChassisTrapSensorControl } STATUS current DESCRIPTION "Conformance group definition for the icsChassisSensorTrapsGroup" ::= { icsChassisTrapMibGroups 9 } -- -------------------------------------------------------------------------- -- compliance statements -- -------------------------------------------------------------------------- icsChassisTrapMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement." MODULE -- this module MANDATORY-GROUPS { -- icsChassisTrapControlGroupConformance, icsChassisSystemTrapsGroupConformance, icsChassisSlotTrapsGroupConformance, icsChassisPortTrapsGroupConformance, icsChassisPowerTrapsGroupConformance, icsChassisTemperatureTrapsGroupConformance, icsChassisFanTrapsGroupConformance, icsChassisBackplaneTrapsGroupConformance, icsChassisSensorTrapsGroupConformance } ::= { icsChassisTrapMibCompliances 1 } -- -- END of ICS-CHASSIS-NOTIFICATION-MIB -- END