February 1994


   D-Link Drivers Installation Readme
		  for
Windows NT V3.1 & Windows for Workgroups V3.11
==============================================

***********************************************
*  README for Windows NT V3.1 Installation    *
***********************************************

The DE650 Ethernet LAN drivers for DE-650 cards for Windows NT contained in this
diskette are as follows:

\NT31\DE650.SYS     NDIS 3.0 driver for Windows NT
\NT31\OEMSETNT.INF  OEMSETUP file for Windows NT
\DISK1
\DISK2

Installation Procedure:

(1)  When LAN drivers is installed, Windows NT will present a list of all
     available drivers.  Since there will be no D-Link DE-650 drivers
     initially, select OTHERS for 3rd party adapters not in the driver list.

(2)  Windows NT will ask for the drive/path containing the DE-650 Windows NT
     drivers.  Insert the D-Link driver diskette in drive A: and respond with
     the following

     A:\NT31

(3)  Windows NT will attempt to locate an OEMSETNT.INF file in the specified
     path. If you have entered the path name correctly, Windows NT should copy
     the appropriate drivers to the Windows NT system.

(4)  At this point, the driver would have been properly copied and the
     installation would proceed to the next step.  Please refer to your
     Windows NT installation guide for correct procedures.

(5)  After the initial installation, the DE-650 drivers will be permanently
     copied to the Windows NT system.  Subsequent network driver lists will
     already contain D-Link DE-650 driver.


**********************************************************
*  README for Windows for Workgroups V3.11 Installation  *
**********************************************************

The DE650 Ethernet LAN drivers of de-650 cards for Windows for Workgroups
contained in this diskette are as follows:

\WFW311\DE650.386       D-Link NDIS 3.0 WFW driver for Windows for Workgroups
\WFW311\DE650.DOS       D-Link NDIS 2.0 DOS driver for Windows for Workgroups
\WFW311\DE650ODI.COM    D-Link ODI driver for Windows for Workgroups
\WFW311\NET.CFG         NET.CFG file for Windows for Workgroups
\WFW311\OEMSETUP.INF    OEMSETUP file for Windows for Workgroups
\DISK1
\DISK2

Installation Procedure:

(1)  When LAN drivers is installed, Windows for Workgroups will present a list
     of all available drivers.  Since there will be no D-Link de-650 drivers
     initially, select UNLIST for 3rd party adapters not in the driver list.

(2)  Windows for Workgroups will ask for the drive/path containing the de-650
     Windows for Workgroups drivers.  Insert the D-Link driver diskette in
     drive A: and respond with the following

     A:\WFW311

(3)  Windows for Workgroups will attempt to locate an OEMSETUP.INF file in the
     specified path. If you have entered the path name correctly, Windows
     for Workgroups should copy the appropriate drivers to the Windows for
     Workgroups system.

(4)  At this point, the driver would have been properly copied and the
     installation would proceed to the next step.  Please refer to your
     Windows for Workgroups installation guide for correct procedures.

(5)  After the initial installation, the de-650 drivers will be permanently
     copied to the Windows for Workgroups system.  Subsequent network driver
     lists will already contain D-Link de-650 drivers.

Tel:    +44 (0)81 203 9900
Fax:    +44 (0)81 203 6915
BBS:    +44 (0)81 203 5029
Faxback:+44 (0)81 203 5048

