
=============================================================================
DATE:       Oct 19, 2006
=============================================================================


=============================================================================
FEATURES ADDED IN THIS RELEASE
=============================================================================
FAL_38a
 1. Changed the FRUSDR Load Utility to v 7.0.6.


[END OF RELEASE NOTES]


=============================================================================
Pedigree of Changes
=============================================================================

FRUSDR R38 (Not Released)
 1. Cleaned up the SDR, CFG files for easy review & modifications.

FRUSDR R37 (Released)
None

FRUSDR R36 (Released)
1. Defect# 127357. The following SDR's are being reported as having issues 
which affect customer's software. (Fixed the entity instance values in CPU2 
VRD Temp and CPU2 Vcc OOR records.)
2. Remove the PVCS header.


FRUSDR R35 (Not Released)
1. # 125853. No SEL entry to indicate loss of redundancy after 10th SBE injection in sparing. (Update the Sensor Initialization byte in the sensors F0h to F5h from 2Dh to 67h.)
2. # 27340. Change required for legal wording in FRUSDR release notes. (Fix release note title.)
3. Remove processor 2 records of Domain 3 and Domain 4 in other chassis.
4. Fix Count of Temperature valus from 08 to 09.



Frusdr R34 (Released)
1. Defect# 127295. Update CPU steppings in FRUSDR



FRUSDR 33 (Not Released)
--- 1. Defect# 127139. The SDR record of some sensors didn't match with ESB2 BMC EPS v1.1.
a. Fixed the power unit status sensor assertion and deassertion event mask to 7300h.
b. Added the deassertion event mask in sensor# 01h, 02h, 04h, 6Fh, E1h to E7h and ECh to EFh.
c. The sensor# 86 has been removed.
d. The upper non-critical has been removed in sensor# C0h and C1h.
e. The assertion and deassertion event mask has been removed in sensor# D0h and D1h.
--- 2. Defect# 127200. Therm Ctrl sensor SDR settings incorrect - causes "nominal" 
reading in ISM to show up unavailable. (Set analog characteristic flags bit 0 
in P1 and P2 thermal control records.)
--- 3. Defect# 127201. Therm Margin SDR's need units to be set to temperature instead 
of unspecified. (Set sensor unit 2 field to degree C in P1 and P2 thermal margin records)
--- 4. Defect# 127211. Other Chassis - PWM3 and PWM4 should be set to 100% as a default. 
(Add PWM3 and PWM4 records for other chassis and setting it to 100%.)
--- 5. Defect# 127226. Sensor Initialization needs to be changed from 0x27 to 0x67 for 
the following sensor numbers. (Fixed sensor initialization from 27h to 67h in 
sensor# 90h, 91h and E0h to E7h )
--- 6. Defect# 127230. Threshold and Range settings for other chassis processor 
fansinks should be increased to enable reading of full range of fan speeds. 
(Fixed LM94 RPM for 100% and threshold values in processor 1 and 2 fan)
--- 7. Defect# 127103. Power supply sub system is shown as redundant when one is absent. 
--- 8. Defect# 127146. Other chassis fan OEM config SDR's not present. 
Causes Other chassis fan tach readings to be incorrect. (The LM94 and SIO records 
were added in other chassis.)
--- 9. Defect# 127151. The lower non-critical threshold value of HSBP temperature 
sensor is the same with the normal minimum value. (Fixed HSBP temperature lower 
critical to 00h and lower non-critical to 05h.)
--- 10. Defect# 127158. A minor typo error in String Byte details for voltage 
sensor names. (Add the "+" in voltage records.)
--- 11. Defect# 127174. Sensor called BB+1.9V  NIC CORE  Sensor 11h changed Typical 
set point from 1.90V to 1.95V. (Remove the 1.9 NIC records.)
--- 12. Defect# 127175. 5000X AC Type 2 record does not read S5000XAL. 
(Add the file which names ALXMBD_2.FRU for S5000XAL.)
--- 13. Defect# 127181. FRUSDR throttling value updates 
--- 14. FRUSDR 32 will detect the North bridge type then update each FRU.



FRUSDR R32 (Released)
1. Remove BB+1.9V NIC CORE record.



