Purpose: Update HSC, BMC, BIOS, FRUSDR, IMM firmware


Please follow below steps to update your firmware
1. Remove IMM
2. Update HSC firmware
3. Update BMC
4. Update BIOS
5. Update FRUSDR
6. Add IMM
7. Update IMM firmware
8. Update FRUSDR

-------------------------------------------------------------------------------------
Instruction to update IMM and FRUSDR
-------------------------------------------------------------------------------------
Please follow below steps to update R710 BMC and FRUSDR
1. Update mBMC FRUSDR (i.e. step 5 above)
1.1 Unplug IMM module
1.2 Boot into pure DOS. Run Autoexec.bat for FRUSDR update at DOS mode
1.3 When finished.  Reset system and unplug AC power cord.

2. Update IMM
2.1 Update IMM firmware (i.e. step 7 above)
 2.1.1 Plugin IMM module
 2.1.2 Short Pin1-2 of J1B1 in IMM, Short Pin1-2 of J2B1 (default position) in IMM
 2.1.3 Run Run.bat for IMM firmware update at pure DOS mode.
 2.1.4 Reset system when it is finished.
 2.1.5 You have to flash latest FRUSDR after IMM is update.

2.2 Update FRUSDR (i.e. step 8 above)
 2.2.1 Unplug the power cord.  Short pin2-3 of J1B1 (set to default position) in IMM
 2.2.2 Boot into pure DOS. Run Autoexec.bat for FRUSDR update at DOS mode
 2.2.3 When finished.  Reset system and unplug AC power cord.

-------------------------------------------------------------------------------------
End
-------------------------------------------------------------------------------------