**************ACER SIRIUS(7A8DR-H) IPMI1.5 Firmware Release History*****************
---------------V0.01---------------------------04/19/2005
Original Source: 110GC(9IVDPH) IPMI1.5 Version 0.01
Feature Implemented:
	-The kernel is updated to the latest one.
	-Backplane FAN speed control is implemented.
	-POST code is displayed at LED 7~15 of IPMI module.
	-Sensors are built for Acer Sirius.
	-FRU is built for Acer Sirius.
	-SDR is built for Acer Sirius.
Item Fixed:
	-RMCP Sequence number of RMCP Pong message is not 0xff. According to IPMI sepc., it should be 0xff to indicate IPMI.
	-The fifth byte of response data of Get Channel Authentication Capability sometimes does not return 0x00 and LSM may
	 treat it as a IPMI2.0 system.
File distributed:
	- Firmware Image: sirius01.bin
	- SDR Image: sirius01.SDR
	- FRU Image: sirius01.FRU
---------------V0.02---------------------------04/29/2005
From: V0.01
Item Fixed:
	-The System GUID apears to change.
File distributed:
	- Firmware Image: sirius02.bin
	- SDR Image: sirius01.SDR
	- FRU Image: sirius01.FRU
---------------V0.03---------------------------05/04/2005
From: V0.02
Item Fixed:
	-When issuing "Get SDR", the firmware checks the reservation ID even the offset is set to zero. According to IPMI spec,
	 the reservation ID is not required if offset is zero.
File distributed:
	- Firmware Image: sirius03.bin
	- SDR Image: sirius01.SDR
	- FRU Image: sirius01.FRU
---------------V0.05---------------------------05/26/2005
From: V0.03
Feature Implemeted:
	-GEM318 feature of HDD PLT board is implemented.
	-HDD PLT temperature, HDD PLT Fan, HDD status sensors are implemented.
Changes in SDR
	-HDD PLT temp, HDD PLT Fan, HDD status sensors are added.
File distributed:
	- Firmware Image: sirius05.bin
	- SDR Image: sirius02.SDR
	- FRU Image: sirius01.FRU
---------------V0.07---------------------------06/02/2005
From: V0.05
Feature Implemeted:
	- Modify smartfan function.
File distributed:
	- Firmware Image: sirius07.bin
	- SDR Image: sirius02.SDR
	- FRU Image: sirius01.FRU
---------------V0.08---------------------------06/12/2005
From: V0.07
Feature Implemeted:
	-The high limit temperature for controlling the fan is set to be 62 degree C and hysteresis is set to be 5.
Changes in SDR
	-The device ID string of type 0x12 of SDR is changed to "Sirius 0.03".
	-The formula conversion constant of Vcore_CPU2 is modified to get the correct formula.
	-The threshold settings for Vcore are re-arranged.
File distributed:
	- Firmware Image: sirius08.bin
	- SDR Image: sirius03.SDR
	- FRU Image: sirius01.FRU
---------------V0.09---------------------------06/16/2005
From: V0.08
Feature Implemeted:
	-The most recent SEL addition and erase timestamp info is lost when AC is removed. At this version, the information is stored at 
	 EEPROM Address 0x7104 for addtion timestamp and 0x7108 for erase timestamp when doing add SEL, clear SEL and delete SEL. At power-on,
	 firmware will always read the information from EEP.	
	-If the bit7 of 1st byte of request data of "Get Channel authentication Cap" is 1, the firmware just returns 0xCC for the completion code. It is requested by Landesk.
	-The bit28 of session ID of "Activate seesion" is always set to be 0. It is requested by Landesk.
	-The manufacturer ID of Get Device ID is set to be 0x1458 (Gigabyte).
	-The system fan sensor is added.
	-The HDD PLT fan sensors are removed.
Items Fixed:
	-If the size of record of "Get SDR" is set to 0xff, the firmware always ignore the offset value.
	-The SDR for HDD status are too many.
Changes in SDR:
	-The device ID string of type 0x12 of SDR is changed to "0.04".
	-"Sys fan" is added"
	-"HDD PLT FAN" are all removed.
File distributed:
	- Firmware Image: sirius09.bin
	- SDR Image: sirius04.SDR
	- FRU Image: sirius01.FRU
---------------V0.10---------------------------07/07/2005
From: V0.09
Changes in SDR:
	-The unnecessary BIOS SDRs are removed.
	-The "Sensor Record Sharing" of HDD is changed to 1 and makes 8 HDD SDRs.
File distributed:
	- Firmware Image: sirius10.bin
	- SDR Image: sirius05.SDR
	- FRU Image: sirius01.FRU
---------------V0.11---------------------------07/14/2005
From: V0.10
	-Removing the code of making the bit28 of session ID of "Activate session" to be 0. It is requested by Landesk.
File distributed:
	- Firmware Image: sirius11.bin
	- SDR Image: sirius05.SDR
	- FRU Image: sirius01.FRU
---------------V0.12---------------------------07/25/2005
From: V0.11
	-OEM Command - CREATE_SYS_GUIS (netfn/lun:0xd0 cmd:0xB1)
	 request data[0-5]= Sys GUID[0-5]
	-The SYS GUID is stored in EEPROM.
	-Suppport sensors for HDD1 PLT absent and HDD2 PLT Absent.
Changes in SDR:
	-HDD1_PLT_Absent and HDD2_PLT_Absent are added. Assertion/deassertion events are not enabled.
Changes in FRU:
	-The product name is changed to G5350.
File distributed:
	- Firmware Image: sirius12.bin
	- SDR Image: sirius06.SDR
	- FRU Image: sirius02.FRU
---------------VA.13---------------------------08/04/2005
From: V0.12
Items Fixed:
	-After setting 0x06 0x06 0x06 0x06 0x06 0x00 to "auth type enable" parameter of "set LAN config parameter", 
	 the firmware always reports 0x00 for auth type support of Administrator of LAN channel to "Get Channel Auth Capabilities". 
Feature Implemented:
	-Buzzer function is disabled.
File distributed:
	- Firmware Image: siriusA13.bin
	- SDR Image: sirius06.SDR
	- FRU Image: sirius02.FRU
---------------V0.13---------------------------08/09/2005
From: VA.13
Items Fixed:
	-IPMB channels sometimes stops responding when both LAN and IPMB are busy.
	-The sensors for HDD1 and HDD2 plt board are swapped.
Changes in SDR:
	-For consistency, The strings of "HDD PLT1 Temp" and "HDD PLT2 Temp" are changed to "HDD1 PLT Temp" and "HDD2 PLT Temp".
File distributed:
	- Firmware Image: sirius13.bin
	- SDR Image: sirius07.SDR
	- FRU Image: sirius02.FRU
---------------V0.14---------------------------08/09/2005
From: V0.13
Items Fixed:
	-The IPMB transmit can be performed meaninglessly.
File distributed:
	- Firmware Image: sirius14.bin
	- SDR Image: sirius07.SDR
	- FRU Image: sirius02.FRU
---------------V1.00---------------------------08/18/2005
From: V0.14
	-Change to production release version 1.00
File distributed:
	- Firmware Image: s100.bin
	- SDR Image: s100.SDR
	- FRU Image: s100.FRU
---------------V1.01---------------------------09/06/2005
From: V1.01
	-The firmware response OK status for "Get sensor reading" cmd of "Uncorrect ECC" and "POST err" when there is no related error SEL. 
	 And response error when there is a related SEL.
Changes In SDR
	-BIOS Sensor("Uncorrect ECC" and "Post Err") owner ID is changed to 0x20 (BMC) for LSM to show sensor status.
	-The event/reading type of "POST ERROR" is changed to sensor-specific (0x6F) for LSM to show the status.
	-The sensor number of Uncorrect ECC and Post Err is cahned to 0xA0 and 0xA1.
File distributed:
	- Firmware Image: s101.bin
	- SDR Image: s101.SDR
	- FRU Image: s100.FRU
---------------V1.02---------------------------09/20/2005
From: V1.01
	-Redundant fan function is added. When there is a assertion critical event of sys fan, the redundant fan is turned on.
	 It is turned off when the critical event is deasserted.
File distributed:
	- Firmware Image: s102.bin
	- SDR Image: s101.SDR
	- FRU Image: s100.FRU
---------------V1.03---------------------------10/17/2005
From: V1.02
	-Detect to see if the sys fan speed is above 2200rpm. If it is (new sys fan), set the sys fan threshold value to 2200 rpm. If its not (old sys fan), set value to 1700 rpm.
Change in SDR:
	-The lower critical threshold of Sys Fan is changed to 2200rpm.
File distributed:
	- Firmware Image: s103.bin
	- SDR Image: s102.SDR
	- FRU Image: s100.FRU
---------------V1.04---------------------------10/19/2005
From: V1.03
Items Fixed:
	-The abnormal status of threshold sensors is never shown at status byte when "get sensor reading" is issued.
Features Implemented:
	-Redundant fan function is disabled.
Change in SDR:
	-Assertion/Deassertion event mask of threshold sensors is rearranged so that the status byte of "get sensor reasding" can be shown properly.
	-The lower critical threshold of Sys Fan is changed to 1700rpm.
File distributed:
	- Firmware Image: s104.bin
	- SDR Image: s103.SDR
	- FRU Image: s100.FRU
---------------V1.05---------------------------10/19/2005
From: V1.04
Features Implemented:
	-Redundant fan function is enabled.
File distributed:
	- Firmware Image: s105.bin
	- SDR Image: s103.SDR
	- FRU Image: s100.FRU
---------------V1.06---------------------------11/08/2005
From: V1.05
Items Fixed:
	-If HDD platter board is not attached, the BMC sometimes reports HDD error SELs.
File distributed:
	- Firmware Image: s106.bin
	- SDR Image: s103.SDR
	- FRU Image: s100.FRU