                   *************************************
                    SCO Unix Openserver Package Release Notes
                   *************************************

 OEM Name:         	LSI Logic Corporation
 Release Date:      	07/08/03
 Product Name:     	Installation package v2.18 SCO UNIX Openserver 5.x driver


 Component Name(s) and Version #:
 ------------------------------------------------
 Components:  For SCO UNIX Openserver 5.x Release
 ------------------------------------------------
                       Driver Package version: 	v2.18
                       Driver version: 		v2.18
                       Megamgr version:		v5.04
	               Montior version:		v1.04

 Previous Release:  
		       Driver Package version: 	v2.14	
                       Driver Version: 		v2.14
                       Megamgr version:		v5.02
		       Montior version:		v1.04

 Driver Standard Features:
 -------------------------
   8/40 LD Support
   LD/PD I/O
   IOCTL
   ROMB

 Megaraid Driver Enhancements: 
 ----------------------------
   
 Added support for the following controllers:
   
   LSI MegaRAID SCSI U320-1, 
   LSI MegaRAID SCSI U320-2, 
   LSI MegaRAID SCSI U320-2x, 
   LSI MegaRAID SCSI U320-4,  
   LSI MegaRAID SATA 150-4,
   LSI MegaRAID SATA 150-6 controllers
   
 Megaraid Driver Changes -- Since previous release
 -------------------------------------------------

 1. Fixed system Panic that was occuring after the SMP module loaded. 


 Known Driver and Megamgr Bugs/Limitations/Restrictions:
 -------------------------------------------------
  
 Driver Known Restrictions:
 -------------------------
   
 This is the guide line for SMP package on the system with multi-processors.  If you are installing the
 O/S on the system with multi CPUs, you may want to select 'customize'option during installation. With 
 this selection, the system will install the SMP package that enhances the system's over all performance.
         
 Installation Instructions
 -------------------------
 The image provided with this release is a DOS-readable file.  Use the RWFLOPPY.EXE utility to convert the 
 image into a package file for SCO Openserver. If the image is on your hard drive, put a diskette
 in the floppy drive and type:

 rwfloppy -w filename.img

 The output of RWFLOPPY.EXE will be a diskette formatted for SCO Openserver containing the package file 
 needed for installation.

 NOTE:
 -----
 You can get latest MegaRAID Firmware images and Drivers and Utilities from LSI web Site www.megaraid.lsilogic.com  
 or contact Tech Support at support@lsil.com.





     
  
