
;+------------------------------------------------------------------------
;
; Date    : 2007/07/25
; QCI Ver.: V1.3302 (3C02)
; EC Ver. : V0.36 
; VGA BIOS: UMA Santa Rosa 1478
; CheckSum: 2C14
;
1. Correct 960GL chipset (ePM/eSettings) Supported Maximum Memory Size value to 2 GB.

;+------------------------------------------------------------------------
;
; Date    : 2007/07/23
; QCI Ver.: V1.3301 (3C01)
; EC Ver. : V0.36 
; VGA BIOS: UMA Santa Rosa 1478
; CheckSum: DDE5
;
1. Upgrade Kernal codes from r1.29 to r1.31 for fix below:
   1. Implement ICH8 BSU1.6       
   2. Incorporated SantaRosa PPM reference code V1.51.
   3. Additional PCIE Native Mode support.
   4. Added Penryn MSR save/restore tables.
   5. Fix hung-up in POST when PCI-Express which has only one capability device
      is found..

2. Upgrade Kernal codes from r1.31 to r1.32 for fix below:
	1. Pass BIOS build under 32 bit Vista.
	2. ES register is modified before AFN_ALLOC_NVS. 

3. Update VGA BIOS to v.1478.

4. Fix moving left-right in setup menu will very slowly when system doesn't
   installed HDD on it.

5. Support Amic flash parts to update bios from differrent version.

6. Add support STM M25P80 flash part.

7. Add support x64 winflash of AMIC A25L80P.

8. Change STMicro spi flash command to 0x9F for detect type confuse with AMIC.
   (Needs change PHLASH16.EXE version to v1.6.7.2)

9. Fix WinXP Power manager after S3 resume, the timer can't continue to go S4 issue.

10. add microcode to support 6FB cpu(T7700,T7500)

;+------------------------------------------------------------------------
;
; Date    : 2007/07/12
; QCI Ver.: V1.3205 (3B05)
; EC Ver. : V0.36 
; VGA BIOS: UMA Santa Rosa 1436
; CheckSum: 2D20
;
1. Disable Cardbus controller PME_En bit to avoid Win-XP CPU usage over 50% after insert/remove cardbus device.

;+------------------------------------------------------------------------
;
; Date    : 2007/06/26
; QCI Ver.: V1.3204 (3B04)
; EC Ver. : V0.36 
; VGA BIOS: UMA Santa Rosa 1436
; CheckSum: 502D
;
1. Fix CM550 CPU system run DTM test fail on CPU family show "Unknow" issue.

2. Fix WD HDD Backdoor password failed issue.

3. Fix to report Device Manager FIR, COM1, LPT1 enable/disable states to ePM.

4. Updated EC to v0.36. (Fixed AC-IN pin not stable in power on state)

;+------------------------------------------------------------------------
;
; Date    : 2007/06/20
; QCI Ver.: V1.3203 (3B03)
; EC Ver. : V0.35 
; VGA BIOS: UMA Santa Rosa 1436
; CheckSum: 0FB4
;
1. Fix the issue of Vista Brightness Bar disappeared on GM960 chipset.

2. Fix the issue of ePM Brightness Bar lags on Windows XP. 

;+------------------------------------------------------------------------
;
; Date    : 2007/06/14
; QCI Ver.: V1.3202 (3B02)
; EC Ver. : V0.35 
; VGA BIOS: UMA Santa Rosa 1436
; CheckSum: 9682
;
1. Modify VGA BIOS setting of VGA driver features to disable "LFP as primary"
   item for to allow driver to set external display device as primary device.

;+------------------------------------------------------------------------
;
; Date    : 2007/06/06
; QCI Ver.: V1.3201 (3B01)
; EC Ver. : V0.35 
; VGA BIOS: UMA Santa Rosa 1436
; CheckSum: CF7F
;
1. Updated Phoenix SantaRosa BIOS Kernel code to r1.28. (add to support 960 chipset)

2. Updated M8006FA, M2006FD, M810661 MCU.

3. Add to support USB ports/devices S3 wake.

4. Fix bo bo sound (during adjust brightness by Hot-key)

5. Add to support EON EN25f80 and AMIC A25L80P flash parts.

6. Add to support new Winflash64(v1.0.2.2) tool in x64 Vista.
   (but flash back older version BIOS need to use old Winflash64(v1.0.1.7) in x64 Vista.)

7. Add report S4 resume status on Pre-load table for D2D AP avoid it during S4 resume. 

8. Fix WMI tool ePresentation test fail on "event to app." issue.

9. Fix CPU loading keep 100% during LID closed(even to set Do Nothing") problem. 

10.Updated EC to v0.35.

;+------------------------------------------------------------------------
;
; Date    : 2007/05/09
; QCI Ver.: V1.3113 (3A13)
; EC Ver. : V0.33 
; VGA BIOS: UMA Santa Rosa 1436
; CheckSum: 3C7C
;
1. Fix WinXP DTM resstomp fail on 0x68/0x6C IO range test issue.

2. Removed ASF Specail Commands(CD_BOOT HD_BOOT PXE_BOOT) Supported per SOWs (Broadcom James request). 

3. Updated EC to V0.33 to add CPU TJ85 thermal table and its H/W thermal protection to 80'.

;+------------------------------------------------------------------------
;
; Date    : 2007/04/18
; QCI Ver.: V1.3112 (3A12)
; EC Ver. : V0.32 
; VGA BIOS: UMA Santa Rosa 1436
; CheckSum: 0E7E
;
1. Base on "v0.3111" to build "v1.3112"(Acer formal released BIOS version name).

;+------------------------------------------------------------------------
;
; Date    : 2007/04/16
; QCI Ver.: V0.3111 (3A11)
; EC Ver. : V0.32 
; VGA BIOS: UMA Santa Rosa 1436
; CheckSum: D171
;
1. Updated EC to v0.32.	(Fixed battery unknown command issue.)

;+------------------------------------------------------------------------
;
; Date    : 2007/04/11
; QCI Ver.: V0.3110 (3A10)
; EC Ver. : V0.31 
; VGA BIOS: UMA Santa Rosa 1436
; CheckSum: 42CC
;
1. Corrcted VGA BIOS version name to "SantaRosa".

2. Updated EC to v0.31 (please refer to EC_NOTE.TXT)
   #-----------------------------------------------------------------------#
   # 1. Fixed ESCD can't write fail issue.    	      		    	   #
   # 2. Modify bluetooth enable/disable scancode.			   #
   # 3. Update new thermal table.					   #
   #-----------------------------------------------------------------------#

;+------------------------------------------------------------------------
;
; Date    : 2007/04/09
; QCI Ver.: V0.3109 (3A09)
; EC Ver. : V0.30 
; VGA BIOS: UMA Santa Rosa 1436
; CheckSum: 6C9A
;
1. Fix "Passsword on boot" fail on FingerPrint SKU when TBX installed but 
   internal disabled or No users (figers) are enrolled for TBX.

2. Fix Vista Brightness Bar can't update properly when use WMI set brightness function.

3. M8006FA, M8006FD MCU updated. 

;+------------------------------------------------------------------------
;
; Date    : 2007/03/30
; QCI Ver.: V0.3108 (3A08)
; EC Ver. : V0.30 
; VGA BIOS: UMA Santa Rosa 1436
; CheckSum: 4785
;
1. Correct (ePM/eSettings) Supported Maximum Memory Size value to 4 GB.

2. Add workaround to fix the issue of Vista auto into S4 again after
   S4 resume even Power saver setting is Never.

;+------------------------------------------------------------------------
;
; Date    : 2007/03/29
; QCI Ver.: V0.3107 (3A07)
; EC Ver. : V0.30 
; VGA BIOS: UMA Santa Rosa 1436
; CheckSum: 608A
;
1. Fix Finger Print TBX key-in hang-up issue.

2. Fix WMI tool set Brightness fail issue.

3. Fix HDD effect noise during AHCI mode XP and Vista Restart.      

4. Fix Vista Brightness Bar issue.

5. Fix WMI function can not work properly after S3 resume issue.

6. Updated EC to v0.30 (please refer to EC_NOTE.TXT)

;+------------------------------------------------------------------------
;
; Date    : 2007/03/22
; QCI Ver.: V0.3106 (3A06)
; EC Ver. : V0.28A 
; VGA BIOS: UMA Santa Rosa 1436
; CheckSum: 0F29
;
1. Fix WMI event of D-sub , Lan Cable, Moniter Power issue.
2. Fix WMI Get Moniter Power Status issue
3. Fix INT15 Disable UserPassword Function hangup issue.
4. Remove AHCI option item of Setup menu.
5. Enable Slow-C4 exit for reduce choke noise during system exit C4.
6. Change LVDS power seqenceing T1+T2 timing to 40ms for H/W request.
7. Modify thermal fan speed control value by updated EC code to v0.28A.
8. Fix LAN power lost in S4/S5 issue by updated EC code to v0.28A.


;+------------------------------------------------------------------------
;
; Date    : 2007/03/19
; QCI Ver.: V0.3105 (3A05)
; EC Ver. : V0.26 
; VGA BIOS: UMA Santa Rosa 1436
; CheckSum: 23DB
;
1. Modify "ASF system ID" to 011bh.
2. Modify "ASF Manufacture ID" to 00011165h.
3. Remove "ASF System Reset" command.
1. Fix DTM Hal Timer failed issue.
2. Correct WMI Brightness 10 levels information.
3. Correct WMI C4onC3 enable/disable function.
5. Updated EC to v0.26 to fix bluetooth and Wlan buttons no event issue.
6. Updated EC to v0.26 to add Fn+F6 backlight on/off event.
7. Fix DTM HD audio driver and Lullaby failed issue.
8. Per Acer WMI v0.90 to change WED return value of LAN device connection and D-sub status.
9. Per Acer WMI v0.90 to add "Get monitor power status" and its status change event.
11. Refer to intel 965(G)MCH sighting #306780 Alert to implement its workaround
    to fix the "system might shutdown unexpectedly when THRMTRIP# incorrectly" issue.

;+------------------------------------------------------------------------
;
; Date    : 2007/03/12
; QCI Ver.: V0.3104 (3A04)
; EC Ver. : V0.25 
; VGA BIOS: UMA Santa Rosa 1436
; CheckSum: 0935
;
1. Correct Battery Design Voltage value to fix higher and wrong idle power issue(since V0.2407).
2. Add to implement Get fingerprint device status in INT15 function and WMI function.
3. Add to support Winflash64.
4. Fix brightness level issue by ePM.

;+------------------------------------------------------------------------
;
; Date    : 2007/03/07
; QCI Ver.: V0.3103 (3A03)
; EC Ver. : V0.25 
; VGA BIOS: UMA Santa Rosa 1436
; CheckSum: 3262
;
1. Change PCIE port3 and port4 to enabled mode as BIOS default setting.
2. Change to IGD panel#14(1280x800) as BIOS default setting. 
3. Clear ICH8 PCI and PCIE break event bits for try to improve power saver. 
4. EC updated to v0.25. (please refer EC_Note.txt)

;+------------------------------------------------------------------------
;
; Date    : 2007/03/06
; QCI Ver.: V0.3102 (3A02)
; EC Ver. : V0.25A 
; VGA BIOS: UMA Santa Rosa 1436
; CheckSum: 1132
;
1. Fix System Restart fail after S3-resume issue.
2. Try to save power by disable PCIE port2, port5, port6, and PEG port. (unused ports)
3. Enable clock Run.
4. Change EC code to V0.25A  (for save brightness power of middle level)

;+------------------------------------------------------------------------
;
; Date    : 2007/03/01
; QCI Ver.: V0.3101 (3A01)
; EC Ver. : V0.24 
; VGA BIOS: UMA Santa Rosa 1436
; CheckSum: 19DA
;
1. Update FingerPrint TBX ROM to v6.1.2.
2. Update VGA BIOS to v.1436.
3. Enable "Intel Dual-Frequency Graphics Technology" of VGA BIOS setting.
4. Disable "DPST" of VGA BIOS setting.
5. Fix NBM int15 ax=9610 bx=0008 and bx=0208 sub-function retrun error issue.

;+------------------------------------------------------------------------
;
; Date    : 2007/02/16
; QCI Ver.: V0.2408 (2A08)
; EC Ver. : V0.24 
; VGA BIOS: UMA Santa Rosa 1410
; CheckSum: 4FA5
;
1. Try to fix Fn+ESC crisis key function.
2. Re-config clock gen. to disable SRC7, SRC8 and SRC11 then
   set SRC9 as a Clock request via SMBus. 
3. Update HDA setting for set connect is in front.
4. Removed the ASL code method of DPST brightness function control.
5. Make delay for hard disk ready before issuing command 8C
6. Try to support WMI sub-function8-12, LAN Cable status and PCI device status.
7. Change total Graphics memory	to MaxDVMT mode.
8. Try to show UMA stolen Memory Size in the "Video Memory:" item of
    BIOS Setup menu, and remove the "Total Graphics memory:" item.
9. Updated EC cod to V0.24 (please refer ec_note.txt)

;+------------------------------------------------------------------------
;
; Date    : 2007/02/08
; QCI Ver.: V0.2407 (2A07)
; EC Ver. : V0.22A 
; VGA BIOS: UMA Santa Rosa 1410
; CheckSum: 4BA3
;
1. Add to support Swinflash V2.0.3.4 tool on x86 (32bits) Vista or WinXP.
   (Note: Do not use old Swinflash tool to flash this BIOS !!!)
2. Update kernel code for Power Management Checklist R2.0
3. Try to add DPST brightness function.
4. Try to fix D2D recovery, Fir, Boot menu help string of BIOS setup menu issue.
5. Try to add HDD password function.
6. Try to support cardreader xD picture compliance test.
7. Updated EC code to V0.22A (please refer ec_note.txt)

;+------------------------------------------------------------------------
;
; Date    : 2007/01/30
; QCI Ver.: V0.2306 (2A06)
; EC Ver. : V0.20A 
; VGA BIOS: UMA Santa Rosa 1410
; CheckSum: 4DB0
;
1. Update TBX ROM to v6.1.2 for Acer GUI.
2. Add to turn on backlight in S3-resume.
3. Update EC to v0.20A

;+------------------------------------------------------------------------
;
; Date    : 2007/01/25
; QCI Ver.: V0.2305 (2A05)
; EC Ver. : V0.18 
; VGA BIOS: UMA Santa Rosa 1410
; CheckSum: 8C0F
;
1. Modify HDA verb table for try fix Vista DTM issue.
2. Reserve DRAM space D000:8000~D000:FFFF for let Sycard test program can use it.

;+------------------------------------------------------------------------
;
; Date    : 2007/01/22
; QCI Ver.: V0.2304 (2A04)
; EC Ver. : V0.18 
; VGA BIOS: UMA Santa Rosa 1410
; CheckSum: 3310
;
1. Try to enable AHCI mode as default.
2. Try to implement FingerPrint TBX function.
3. Try fix Userpassword can't be clear after clear SuperPassword issue.
4. Try to fix boot devices sequence.
5. Try to fix the PXE fail(if it's without FDD) issue.
6. Update EC to v0.18 for fix power can't off by press power button.

;+------------------------------------------------------------------------
;
; Date    : 2007/01/17
; QCI Ver.: V0.2303 (2A03)
; EC Ver. : V0.17 
; VGA BIOS: UMA Santa Rosa 1410
; CheckSum: B3AC
;
1. Enable C3/C4 states.
2. Try to updated VBIOS to V.1410
3. Update EC to v0.17.

;+------------------------------------------------------------------------
;
; Date    : 2007/01/12
; QCI Ver.: V0.2302 (2A02)
; EC Ver. : V0.16 
; VGA BIOS: UMA Santa Rosa 1402
; CheckSum: 4386
;
1. Try to fix CCD can't be detected by test program issue.
2. Update EC code to v0.16

;+------------------------------------------------------------------------
;
; Date    : 2007/01/10
; QCI Ver.: V0.2301 (2A01)
; EC Ver. : V0.15 
; VGA BIOS: UMA Santa Rosa 1402
; CheckSum: 9716
;
1. Change the color of line-in jack icon.
2. Remove C3/C4 states to avoid battery mode runtime hangup issue.
3. Try to assign IRQ6 resource to PCMCIA in DOS mode.

;+------------------------------------------------------------------------
;
; Date    : 2007/01/05
; QCI Ver.: V0.1306 (1A06)
; EC Ver. : V0.15 
; VGA BIOS: UMA Santa Rosa 1402
; CheckSum: 0064
;
1. Update Kernel code to r1.18
2. change VGA BIOS to v.1402.
3. change EC to v0.15.
4. Try to fix battery mode system reboot become shutdown isssue.(exp.: press Ctrl+Alt+Del)
5. Try to implement ASF 2.0 features.

;+------------------------------------------------------------------------
;
; Date    : 2007/01/02
; QCI Ver.: V0.1205 (1A05)
; EC Ver. : V0.14 
; VGA BIOS: UMA Santa Rosa 1393
; CheckSum: C6C8
;
1. Turn on DOS mode PC beep.
2. Add to turn on backlight after VGA initial.
3. Try to fix F12 bootmenu setup function.
4. Try to remove "ESC"	bootmenu hotkey.
5. Try to add "[" bootmenu hotkey.
6. Try to implement WMI function.

;+------------------------------------------------------------------------
;
; Date    : 2006/12/21
; QCI Ver.: V0.1204 (1A04)
; EC Ver. : V0.14 
; VGA BIOS: UMA Santa Rosa 1393
; CheckSum: 55C9
;
1. update PXE lom to v10.0.0
2. Modify the Info. and Main of BIOS setup menu.
3. Update kernel code to r1.13.
4. Update EC code to v0.14.
5. Change the message of Press <F2> and press <F12>. 
6. Correct SVID and SSID of card reader.
7. Try to avoid Swinflash appear blue screen in Vista.

;+------------------------------------------------------------------------
;
; Date    : 2006/12/13
; QCI Ver.: V0.1103(1A03)
; EC Ver. : V0.13 
; VGA BIOS: UMA Santa Rosa 1393
; CheckSum: E44D
;
1. Change B5787 PXE ROM for try to support network boot.
2. Update EC code ver. to 0.13.
3. Try to implement Lid event by ICH8 GPIO.
4. Setup menu adds to show VRAM size. 
5. Try to support STUUID.EXE V1.40 above.

;+------------------------------------------------------------------------
;
; Date    : 2006/12/05
; QCI Ver.: V0.1102(1A02)
; EC Ver. : V0.013C(ZU1_013C.bin)
; VGA BIOS: UMA Santa Rosa 1393
; CheckSum: F033
;
0. A1-test H/W needs to rework and swap AC in/out pin and power button pin.
1. Update BIOS kernel to TC/SP3B r1.12.
2. Add to config HDA ALC268.
3. Add to config ENE CB1410 (cardbus) and MR510(card reader).
4. Change SSID to 011Bh.
5. Try to implement NS383 SIO COM port, FIR, LPT port functions.
6. Try to implement ACER SLP2.0 base function.
7. Modify to Page flash mode.
8. Update EC code to ver.0.013C.

;+------------------------------------------------------------------------
;
; Date    : 2006/10/14
; QCI Ver.: V0.01(1A01)
; EC Ver. : V0.01
; VGA BIOS: UMA Santa Rosa 1382
1. ZU1 A1-test Bring up test BIOS.
