XP installation SOP:

1. Put the WinXP SP2 CD disc to DVD-ROM.
2. Plug in USB Floppy with AHCI driver disk to system USB port. (*a)
3. Power on system and press F2 key to enter BIOS.
5. System starts installation. 
4. Set boot priority 1:CD/DVD 2:IDE0 3:USB FDD then restart.
6. Please press F6 key for several times while you see the Press F6 if you. is displayed below the screen. 
7. After about 3~4 minute, the system appear Windows Setupscreen.
8. Press S key , then select Intel 82801HEM/HBM SATA AHCI Controller(Mobile ICH8M-E/M).
9. The system will load AHCI driver through the USB floppy disc, then press Enter key.
10. The system can identify the SATA HDD and start installation successfully, check the system without appear bluescreen.

*a AHCI creation SOP
1. Copy the f6flpy32.exe file to your PC.
2. Plug in USB Floppy with empty disc to your PC USB port.
3. Execute the f6flpy32.exe file to generate the AHCI driver disc.