+============================================================================+
			JALA0 Release Note
+============================================================================+
BIOS CORE Version ................  Insyde EFI 2.0
CPUs Supported    ................  Intel Penryn 1067/800 MHz
Chipset           ................  Intel Cantiga
Bridge            ................  Intel ICH9M
Video             ................  UMA / ATI / nVidia
LCD Size          ................  14 TFT WXGA
Memory            ................  DDR2 667/800 MHz
HDD               ................  SATA
ODD               ................  SATA
PCMCIA            ................  O2 OZ601
Card Reader       ................  JBM385 (5in1)
1394 controller   ................  N/A
Audio             ................  HD Audio Realtek ALC268
LAN               ................  Broadcom BCM5764M
KBC               ................  ENE 926
Clock Generator   ................  ICS9LPRS387
Super I/O         ................  N/A
BIOS ROM Part	  ................  MX25L8005M/ EN25F80
Finger print	  ................  Upek TCS4E
+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 07/14/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V1.09                                                 |
|   KBC BIOS Version   : V1.09                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : 1646                                                  |
|   Kernel Version     : 2037                                                  |
|   Cantiga Version    : 1.00                                                  |
|   Ich9m Version      : 1.18                                                  |
|   MRC Version        : 1.50                                                  |
|   PPM Version        : 1.02	                                                 |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : Pre-mp Build                                          |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      : 800Fh                                                 |
+==============================================================================+
BIOS:
    1) Disable DTS Calibrate to fix unknown shutdown.
    2) Update PPM from 1.01 to 1.02 for fix T3200 can't entery OS.
    3) Implement Monitor status on WMI, Correct Get pci device information.
    4) Correct Wlan Broadcom 94312mcg type.
    5) Fix when system display no bootable device after PXE boot,
       if user press Enter key, system will hang.
    6) Fix press power button between enter S4 can't enter S4 when you ever run s3.
    7) Change wmi method for read battery serial number.
    8) Remove stupid code and fixed "Can't change "Power on Password" state 
       after discard changes with Supervisor password."

EC:
    1) Fix EC shutdown will auto restart issue refer to JAQ10.
    2) Modify fan control table follow 
       "JAL90_JALA0_JAW50_KAL20_CPU_FAN_Thermal Control Table_2008_0708_v14.xls".

+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 06/27/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V1.08                                                 |
|   KBC BIOS Version   : V1.08                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : 1646                                                  |
|   Kernel Version     : 2037                                                  |
|   Cantiga Version    : 1.00                                                  |
|   Ich9m Version      : 1.18                                                  |
|   MRC Version        : 1.50                                                  |
|   PPM Version        : 1.01	                                               |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : Pre-mp Build                                          |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      :    30BCh                                              |
+==============================================================================+
BIOS:
   1) Fixed S4 resume will cause CCD change to USB1.1 when pci-express insert.
   2) Correct PAVP and RS2 without default value.
   3) Fix when boot into WINPE/Arcade, system will blue screen 0xCA.
   4) Correct battery infomation to Li-ion.
   5) Update Vbios 1646.
   6) Fix system can't detect battery sometimes.
   7) Fixed "Can't change "Power on Password" state after discard changes with Supervisor password."

EC:

+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 06/20/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V1.07                                                 |
|   KBC BIOS Version   : V1.07                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : 1642                                                  |
|   Kernel Version     : 2037                                                  |
|   Cantiga Version    : 1.00                                                  |
|   Ich9m Version      : 1.18                                                  |
|   MRC Version        : 1.50                                                  |
|   PPM Version        : 1.01	                                               |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : Pre-mp Build                                          |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      :    5EC9h                                              |
+==============================================================================+
BIOS:
    1) Fix HDCP function fail after resume from S3.

EC:

+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 06/13/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V1.06                                                 |
|   KBC BIOS Version   : V1.06                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : 1642                                                  |
|   Kernel Version     : 2037                                                  |
|   Cantiga Version    : 1.00                                                  |
|   Ich9m Version      : 1.18                                                  |
|   MRC Version        : 1.50                                                  |
|   PPM Version        : 1.01	                                               |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : Pre-mp Build                                          |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      :    0007h                                              |
+==============================================================================+
BIOS:
    1) Update MRC to 1.50.
    2) Update Vbios 1642.
    3) Add Ralink WLAN and Atheros WLAN support of INT15 function.
    4) Fix if resume from s4, system can boot into USB storage.
    5) Fix GL40 can't boot up.
    6) Fix JP keyboard issue.
    7) Fix Robson test fail.
EC:
    1) Update battery capacity behavior to avoid remaining capacity
       is 0 when full charged is set but RSOC is less than 99.

+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 06/03/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V1.05                                                 |
|   KBC BIOS Version   : V1.05                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : 1625                                                  |
|   Kernel Version     : 2036                                                  |
|   Cantiga Version    : 0.87                                                  |
|   Ich9m Version      : 1.15                                                  |
|   MRC Version        : 1.00                                                  |
|   PPM Version        : 1.01	                                               |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : Pre-mp Build                                          |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      :    0EC6h                                              |
+==============================================================================+
BIOS:
    1) Clear RTC power after flash complete.
    2) Fix boot from WindowsXP-SP3 disc to install OS cause black screen.
    3) Fix asset tag abnormal in windows on JALA0.

EC:
    1) Modify fan control table follow
       "JAL90_JALA0_JAW50_CPU_FAN_Thermal Control Table_2008_0529_v12.xls"
    2) Add workaround: EC IDLE when S3 resume.

+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 05/21/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V1.02                                                 |
|   KBC BIOS Version   : V1.02                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : 1625                                                  |
|   Kernel Version     : 2036                                                  |
|   Cantiga Version    : 0.87                                                  |
|   Ich9m Version      : 1.15                                                  |
|   MRC Version        : 1.00                                                  |
|   PPM Version        : 1.01	                                               |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : Pre-mp Build                                          |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      :    D16Fh                                              |
+==============================================================================+
BIOS:
    1) Fix Robson test fail.
    2) Fix can't detect memory card if card reader enter D3E.
    3) Modify DTS fan table for thermal team request.
    4) Update DTS function to support TJ90 cpu.
    5) Change temperature address of CeCTe.
    6) Fix Hdcp.exe read error key.
    7) Disable CapsLock / NumLock /ScrLock keys when into PBA option rom.
    8) Fix PBA function doesn't enable when flash BIOS.
    9) Fix can't wake on LAN.

EC:
    1) Fix Fn+F6 sometimes no function issue.
    2) Add workaround for Finger Printer PBA function.

