[Modified History)
Bios
             1). Fix Bison Camera Lag after S3 Resume of JAWD0
             2). Fix fan keep full on in WinXP
             3). Set GFX PLL default to Auto but disable it on M82 platform
             4). Fix TPDL hang issue(AMD PA_RS780L1)
             5). Update Realtek 8111C PXE ROM to V2.17 (JAWD0)
             6). M82 SKU S3 Resume BSOD 0xD1 when Play Audio Via HDMI then Do S3
             1). Fix PBA function fail.
             2). Update DMI type4 function which is lost when kernal code update
             3). Fix fan keep full on after S4 resume
             4). Fix Realtek 8111C SVID/SSID Lost (JAWD0)
             5). There has error message "system configuration data error" 
                 during post after flash bios. (Have fail rate)
             1). Rename from JAWD0 BIOS Version V0.22 to V1.00
            01). Fix Realtek 8111C SVID/SSID Lost
            01). Fix system time run too fast in windows
            02). Fix there is noise when play music then adjust volume by wheel
            03). Fix M82 system will hang up or no display when play WMA file
            01). Modify Fan/HTC setting for thermal request
		 * DOS/WinPE fan full on
                 * DOS/WinPE HTC trigger point=85C, Windows=95C on JALB0/C0
            02). Add EC Board ID 0x03 in BIOS for JALC0
            03). Card Reader D3E Support for JALC0 Board ID 0x03
            04). Fix USB2.0 device on port7 can't wake from S3
            05). Modify S3 Resume Code for M82+HCF Black Screen 0x63 Issue
            06). Skip PCMCIA Initial if Platform is not JALC0
            07). Set GFX, GPP, SB PLL to Auto
            08). Fix S3 resume blue screen(0xF4) or HDD lose when system install
                 WD HDD. (Provided by AMD)
            09). Fix M86 S3 resume hang at 0x63 in CX3 kernal code base
            01). Disable IRQ1/IRQ12 when Boot to Windows as AMD's Request
            02). Disable JMB385 ASPM L0s/L1
            03). Update JMB385 Code for D3E BDG V1.2
            04). Change JMB385 Temp BUS Number for Conflict with LAN BUS
            05). Modify BIOS Advance Menu Hidden Rule
            06). Correct UMA Share Memory Help Item of BIOS Setup Menu


EC
                1). Need flash EC's boot block? --> NO
                2). Rename from K2627105A.ROM for JALB0/C0
                1). Need flash EC's boot block? --> NO
                
  Modified:
 		1). Update DISCRETE and VGA fan table. (JALB0 only)
 	            Thermal Fan control table V0.7     (DIS)
 		2). Update UMA fan table.	       (JALB0/C0)
 	            Thermal Fan control table V0.7     (UMA)
 		3). Update keyboard function to avoid system amber LED flash 
 	            under S3 mode with keyboard pressed.
                1). Need flash EC's boot block? --> NO
                2). Rename from K33A022A      
                1.> Need flash EC's boot block? --> NO
                2.> Rename from K2627104A.ROM to K33A022A.ROM for JAWD0
                2.> JAWD0 Shares the same EC FW with JALB0/C0. Only the
                    version is different.
        	1). Need flash EC's boot block? --> NO
                2). Rename from K2627103A.ROM
        	1). Need flash EC's boot block? --> NO

  Modified:
 		1). Modify 4s shutdown process to avoid EC_ON still high after
	            4s shutdown.
 		2). Add Fn testing scan code. (For factory use)
	            Cmd59 Dat64/65 to enable/disable the testing scancode.
 		3). Modify battery device name check function for JAWD0.
        	1). Need flash EC's boot block? --> NO

  Modified:
 		1). Add Lan in/out and backlight event.
 	    	    This event will not trigger when SLP_S5 is low for ASF.
 		2). Update ENEWinFlash function.
 		3). AMD workaround for warmboot.
	 	4). Update battery capacity behavior to avoid remaining capacity
	            is 0 when full charged is set but RSOC is less than 99.

[SOP]

Dos:
	1) unzip jab106a
	2) boot to dos mode, execute JALB106.BAT

Windows 32 bit:
	1) unzip jab106a
	2) boot to , execute flash32.exe

Windows 64 bit:
	1) unzip jab106a
	2) boot to dos mode, execute flash64.exe
