+==============================================================================+
|    	               EDL00 BIOS FLASH USAGE                                  |
+==============================================================================+
1. formal flash process
  a). Load DOS's TSR to high memory.
      * Confirm HIMEM.SYS is in your boot disk, you can find it in DOS.
      * Assume HIMEM.SYS reside in c:\,  add following statement in CONFIG.SYS:
        DEVICE=C:\HIMEM.SYS
        DOS=HIGH
  b). Copy all files to thumb or hard disk. Note that can't use floppy disk,
      as it's size is too small to execute following steps.
  c). Boot into DOS.
  d). Execute flash.bat, and wait for all process done. In this step, will
      produce all.rom that has flash capability. It is suitable for your
      platform's vga and lan chip.

2. Build all sku's rom
   Execute buildrom.bat in DOS or Windows, then it will create rom files of
   various SKU.

3. Using crisis
   a). Copy bflashit.bin and 512K bios rom to floppy disk.
   b). Plug in floppy disk to your system.
   c). Unplug AC
   d). Press Fn+Esc and don't release.
   e). Plug AC, then release Fn+Esc.
   f). Press power button and wait crisis to be finished.
