Change History:
1. To fix the issue of "NO Display on DVI output when using EZDock4 with TM3000".

Important Note:
To use TM3000 System CD rev2.0 (P/N: SD.T7403.003) or later which included
updated driver for external optical drive, you must update TM3000 M/B BIOS 
to 3B07 or later with updated VGA BIOS; otherwise, it'd fail when booting up 
TM3000 with Recovery CD from external IEEE1394 optical drive.

==============================================================
To flash in Windows mode, pls install Winflash utility as in Winflash.zip.
To flash in pure DOS mode, pls run: PHLASH16 xxx.WPH /mode=3 /S

P.s.
If you're using DOS bootable floppy (w/o himen.sys) created in Windows XP, 
you will get an error like "can't present memory manager" while you 
update the BIOS (ie himen.sys)

You may do either one of the two ways to resolve:
1. press F5 to bypass himem.sys 
2. modify the parameter from /S to /X 

The parameter  /X  for PHLASH is "Ignore XMS memory manager check".
The parameter /S PHLASH is "Silent operation (Turn off speaker)".
==============================================================
