;+------------------------------------------------------------------------
;
; Date      : 6/24/'05
; BIOS Ver. : 3A21
; EC Ver.   : 1A24
; VGA BIOS  : br13394.bin
;
1. Fix the HCT test "ACPI verifier" fail.
   Fix the HCT test "ACPI Stress" fail.
   Fix the HCT test "Enabled/Disabled device IO" fail.

;+------------------------------------------------------------------------
;
; Date      : 6/17/'05
; BIOS Ver. : 3A20
; EC Ver.   : 1A24
; VGA BIOS  : br13394.bin
;
1. Update formal release PXE ROM.

2. Change back HDD smart function to fix 64 bit WinXP install failure.
   Seagate will update new HDD firmware to fix SMART error.

;+------------------------------------------------------------------------
;
; Date      : 6/7/'05
; BIOS Ver. : 3A19
; EC Ver.   : 1A24
; VGA BIOS  : br13394.bin
;
1. Update EC BIOS.

;+------------------------------------------------------------------------
;
; Date      : 6/7/'05
; BIOS Ver. : 3A18
; EC Ver.   : 1A23
; VGA BIOS  : br13394.bin
;
1. Update new VGA BIOS.

2. Add sleep trap method for LCD power off sequence during entering S4.

3. Fix the system hang after resume from S4 and then enter S3 with 
   USB controller disabled in device manager.

;+------------------------------------------------------------------------
;
; Date      : 6/1/'05
; BIOS Ver. : 3A17
; EC Ver.   : 1A23
; VGA BIOS  : br13252.bin
;
1. Update EC BIOS.

2. Modify AMD CPU function 3 some registers by AMD RegCheck error.
   0x70 = 0x51020111
   0x74 = 0x50008011
   0x78 = 0x08003800
   0x7C = 0x0000221B

;+------------------------------------------------------------------------
;
; Date      : 5/30/'05
; BIOS Ver. : 3A16
; EC Ver.   : 1A22
; VGA BIOS  : br13252.bin
;
1. Add LCD power off sequence during entering S4/S5.

;+------------------------------------------------------------------------
;
; Date      : 5/27/'05
; BIOS Ver. : 3A16C
; EC Ver.   : 1A22
; VGA BIOS  : br13252.bin
;
1. Update new VGA BIOS.

;+------------------------------------------------------------------------
;
; Date      : 5/27/'05
; BIOS Ver. : 3A16B
; EC Ver.   : 1A22
; VGA BIOS  : br129446.bin
;
1. Fix some DIMM error during boot to OS by Modified 
   AMD function 3 reg90 bit28=1 to enable 2T.

2. Change new PXE ROM to fix the LAN boot error.

3. VGA BIOS no change.

;+------------------------------------------------------------------------
;
; Date      : 5/22/'05
; BIOS Ver. : 3A15
; EC Ver.   : 1A22
; VGA BIOS  : br129446.bin
;
1. Fix S3/S4 issue by modified PMIO reg50=0,reg51=c,reg68=0x4c.

2. Remove unused ASL code.

3. Remove HDD smart function by Eric suggestion.
   And BIOS will add code back after the Phoenix and Seagate work completely.

4. Remove CMOS item "C State Configuration".

;+------------------------------------------------------------------------
;
; Date      : 5/19/'05
; BIOS Ver. : 3A14
; EC Ver.   : 1A22
; VGA BIOS  : br129446.bin
;
1. Fix the 64bit XP hang when run ACER's E-SETTING TOOLS.

2. Fix the end of "Press <F2> to enter setup" BAR have incorrect image on POST screen.

3. Change back HDD smart function to fit ACER spec.

;+------------------------------------------------------------------------
;
; Date      : 5/11/'05
; BIOS Ver. : 3A14B
; EC Ver.   : 1A22
; VGA BIOS  : br129446.bin
;
1. Update EC BIOS.

2. Remove HDD smart function for Seagate HDD test fail.

3. Modify some ATI's registers for ATI's regcheck report error.

4. Fix the system hang when CRISIS flash end then restart system.

5. Update Ferrari's LOGO.

;+------------------------------------------------------------------------
;
; Date      : 5/11/'05
; BIOS Ver. : 3A13
; EC Ver.   : 1A21
; VGA BIOS  : br129446.bin
;
1. Update EC BIOS.

2. Change BIOS version to 3A13.

3. Remove the ASPML1 solution as follows:
   AspmL1/GFX  - disabled
   AspmL1/PCIE - disabled
   AspmL1/SB   - disabled

;+------------------------------------------------------------------------
;
; Date      : 5/10/'05
; BIOS Ver. : 3A13C
; EC Ver.   : 1A20
; VGA BIOS  : br129446.bin
;
1. Fix the DOCK device NO found when boot to OS and plug DOCK.

;+------------------------------------------------------------------------
;
; Date      : 5/10/'05
; BIOS Ver. : 3A13B
; EC Ver.   : 1A20
; VGA BIOS  : br129446.bin
;
1. Fix the DOCK device NO found on BIOS 3A13A.

;+------------------------------------------------------------------------
;
; Date      : 5/10/'05
; BIOS Ver. : 3A13A
; EC Ver.   : 1A20
; VGA BIOS  : br129446.bin
;
1. Fix the system hang when AspmL1/SB function enable.

;+------------------------------------------------------------------------
;
; Date      : 5/9/'05
; BIOS Ver. : 3A12
; EC Ver.   : 1A20
; VGA BIOS  : br129446.bin
;
1. For power consumption, the ASPML1 solution as follows:
   AspmL1/GFX  - disabled
   AspmL1/PCIE - enabled
   AspmL1/SB   - enabled

2. Modify some ATI's register value for ATI register check report error 
   after S3 resume.
   
;+------------------------------------------------------------------------
;
; Date      : 5/5/'05
; BIOS Ver. : 3A12B
; EC Ver.   : 1A20
; VGA BIOS  : br129446.bin
;
1. Remove ASPML1 function for the system run unstable.

;+------------------------------------------------------------------------
;
; Date      : 5/5/'05
; BIOS Ver. : 3A12A
; EC Ver.   : 1A20
; VGA BIOS  : br129446.bin
;
1. Try to fix boot time too long.

2. Enable ASPML1 for power consumption.

3. Fix the system hang when S3 resume with enable ASPML1 and battery mode.

4. Update EC BIOS.

;+------------------------------------------------------------------------
;
; Date      : 5/3/'05
; BIOS Ver. : 3A11
; EC Ver.   : 1A19
; VGA BIOS  : br129446.bin
;
1. Enable P-state debug item, "C2/C3/C2+C3" for 3Dmark test.
   The default change back to C2+C3 enable.

2. Save/restore some AMD function2/function3 registers for S3 resume.

3. Update new VBIOS for testing.

4. Try to fix the system hang after run S3 about 100~130 times.

5. Modify the BootBlock search BIOS signature routine to improve boot time.

6. Modify thermal method.
   100c => shutdown
   95c  => CPU throttle, CPU speed to 800mhz then current temp is 84c.
   80c  => temp down to 80c, CPU speed to normal.

;+------------------------------------------------------------------------
;
; Date      : 4/30/'05
; BIOS Ver. : 3A11D
; EC Ver.   : 1A19
; VGA BIOS  : br12124.tst
;
1. Enable P-state debug item, "C2/C3/C2+C3" for 3Dmark test.
   The default set to C2 enable.

2. Fix to get correct CPU PSTATE Number for ML-34.
   This feature is relative with thermal method.
      95c  => CPU throttle, CPU speed to 800mhz.

;+------------------------------------------------------------------------
;
; Date      : 4/30/'05
; BIOS Ver. : 3A11C
; EC Ver.   : 1A19
; VGA BIOS  : br12124.tst
;
1. Disable C3 and test 3Dmark hang issue with CPU  ML-34.

;+------------------------------------------------------------------------
;
; Date      : 4/29/'05
; BIOS Ver. : 3A11B
; EC Ver.   : 1A19
; VGA BIOS  : br12124.tst
;
1. Fix the system hang after S3 resume and undock system.

2. Update EC BIOS to fix audio delay on DOCK with plugged PS2 mouse.

;+------------------------------------------------------------------------
;
; Date      : 4/29/'05
; BIOS Ver. : 3A11A
; EC Ver.   : 1A18
; VGA BIOS  : br12124.tst
;
1. Update Synaptic ID in ASL.

2. Remove some debug items in CMOS.

3. Modify thermal method.
   100c => shutdown
   95c  => CPU throttle, CPU speed to 800mhz.
   90c  => temp down to 90c, CPU speed to normal.

4. Add LCD power off sequence.

5. Update new VBIOS for testing.

;+------------------------------------------------------------------------
;
; Date      : 4/27/'05
; BIOS Ver. : 3A10
; EC Ver.   : 1A18
; VGA BIOS  : br12124.pwr
;
1. Fix #qb044.
   The previous is incorrect. The real Fixitem is #qa069.

2. Support the system run in CPU max-speed during POST.
   Improve boot time for #qb054.

3. For C-STEP change BIOS version.
 
;+------------------------------------------------------------------------
;
; Date      : 4/26/'05
; BIOS Ver. : 2A19A
; EC Ver.   : 1A18
; VGA BIOS  : br12124.pwr
;
1. Remove Aspm L1 for PCIE GFX/GPP link enable
   Remove SB PCIE L0 and L1 power saving enable.
   For system hang after S3 resume with battery mode.

2. Add Synaptic ID in ASL.

3. Remove Phoenix logo in POST.

4. Fix the CRISIS key can't get issue.

5. Fix #qb053 by EC BIOS.
   Q8a -> for LID event
   Q8b -> for BAY SWAP event
   Q8c -> for EZDOCK event
   Q8d -> for NuCARD event

6. Update new EC BIOS.

;+------------------------------------------------------------------------
;
; Date      : 4/22/'05
; BIOS Ver. : 2A18
; EC Ver.   : 1A17A
; VGA BIOS  : br12124.pwr
;
1. Modify ATI register by ATI regcheck utility.

2. Add Aspm L1 for PCIE GFX/GPP link enable
   Add SB PCIE L0 and L1 power saving enable.

;+------------------------------------------------------------------------
;
; Date      : 4/21/'05
; BIOS Ver. : 2A18C
; EC Ver.   : 1A17A
; VGA BIOS  : br12124.pwr
;
1. Modify PCIE register for power consumption by ATI's solution.
   Then System power can reduce down to 18W.

2. By power team meature result, the item 1 failed.

;+------------------------------------------------------------------------
;
; Date      : 4/21/'05
; BIOS Ver. : 2A18B
; EC Ver.   : 1A17A
; VGA BIOS  : br12124.pwr
;
1. Fix the system hang during S3 resume with HDD Password enabled.

2. Fix the HCT test PCI Compliance fail.

3. Fix the HCT test ACPI verifier fail.

4. Modify thermal method.
   100c => shutdown
   90c  => CPU throttle, CPU speed to 800mhz.
   85c  => temp down to 85c, CPU speed to normal.

5. Modify ATI register by ATI regcheck utility.

6. Change VGA BIOS for power consumption.

7. Support new CPU ML-37, ML-34.

;+------------------------------------------------------------------------
;
; Date      : 4/20/'05
; BIOS Ver. : 2A17
; EC Ver.   : 1A17A
; VGA BIOS  : br12124.bin
;
1. Update new EC BIOS.

2. Modify thermal Zone feature included AMD CPU temp offset value.

3. Add keyborad int 0x09 hook for ACER hotkey feature.

;+------------------------------------------------------------------------
;
; Date      : 4/19/'05
; BIOS Ver. : 2A17B
; EC Ver.   : 1A17
; VGA BIOS  : br12124.bin
;
1. Fix system memory report error.

;+------------------------------------------------------------------------
;
; Date      : 4/19/'05
; BIOS Ver. : 2A17A
; EC Ver.   : 1A17
; VGA BIOS  : br12124.bin
;
1. Fix Qb030.

2. Fix Qa026.

3. Fix Qb032.

4. Fix Qb033.

5. Fix Qb039.

6. Update new EC BIOS.

7. Fix battery status report incorrectly.

8. Fix the system hang during plug/unplug USB FDD by EC BIOS.

;+------------------------------------------------------------------------
;
; Date      : 4/14/'05
; BIOS Ver. : 2A16
; EC Ver.   : 1A16
; VGA BIOS  : br12124.bin
;
1. Fix the autodim function can't work.

2. Fix the mouse crazy in DOS.

3. Add bus0, dev0, func0 regc9 bit5=1 for power comsumption.
   Add ATI's regchk solution for power comsumption.

4. Fix HCT the unreport memory and I/O port test fail.

5. Fix the system can't work in high speed during battery mode.

6. Fix the system work incorrectly when resume from S3/S4 and plug DOCK.

;+------------------------------------------------------------------------
;
; Date      : 4/7/'05
; BIOS Ver. : 2A15
; EC Ver.   : 1A16
; VGA BIOS  : br12124.bin
;
1. Fix the system wait long time during entering suspend for S3/S4.

2. Fix the first time system work incorrectly during hotplug BAY ODD.

3. Fix the COM1 have jellow mark during DOCK EZ4 (QB003).

4. Fix the QB008.

5. Fix the EZ4's TI1394 work incorrectly after resume from S3.

6. Fix the battery status report incorrectly.

7. Fix the crisis function can't work.

8. Fix the int 0x15 ax=0x9610 bl=0x10 function report incorrectly.

;+------------------------------------------------------------------------
;
; Date      : 3/31/'05
; BIOS Ver. : 2A14
; EC Ver.   : 1A16
; VGA BIOS  : br12124.bin
;
1. Fix the system hang after S4 resume.

2. Fix the bluetooth status work incorrectly during device NOT installed.

;+------------------------------------------------------------------------
;
; Date      : 3/30/'05
; BIOS Ver. : 2A14A
; EC Ver.   : 1A16
; VGA BIOS  : br12124.bin
;
1. Add to save/restore bluetooth/wireless lan flag routine 
   during suspend/resume.

2. Add to press power button then the system OFF function in DOS.

3. Update new EC BIOS.

;+------------------------------------------------------------------------
;
; Date      : 3/29/'05
; BIOS Ver. : 2A13
; EC Ver.   : 1A15
; VGA BIOS  : br12124.bin
;
1. Add Email Led blink/off function by int 0x15 interface.

2. Fix the system work incorrctly during dock/undock many times.

3. Fix the NewCard work incorrctly after S3 resume.

4. Update new EC BIOS.

;+------------------------------------------------------------------------
;
; Date      : 3/22/'05
; BIOS Ver. : 2A12
; EC Ver.   : 1A13
; VGA BIOS  : br12124.bin
;
1. Fix the keybaord error when CMOS offset 0x70 bit0 set to 0 and reboot.

2. Fix the CPU speed work incorrectly in CMOS.

3. Fix the time is too long during S4 suspend/resume.

;+------------------------------------------------------------------------
;
; Date      : 3/18/'05
; BIOS Ver. : 2A12A
; EC Ver.   : 1A13
; VGA BIOS  : br12124.bin
;
1. Add the thermal function to change CPU speed.
	temp > 90c --> CPU change to low speed(800MHz)
	temp < 75c --> CPU change to high speed (2.2G)

2. Update new VGA BIOS.

;+------------------------------------------------------------------------
;
; Date      : 3/18/'05
; BIOS Ver. : 2A11
; EC Ver.   : 1A13
; VGA BIOS  : br11563.bin
;
1. Rename BIOS version from 2A11F TO 2A11.

;+------------------------------------------------------------------------
;
; Date      : 3/17/'05
; BIOS Ver. : 2A11F
; EC Ver.   : 1A13
; VGA BIOS  : br11563.bin
;
1. Fix B-step some panel will hang at postcode 0xb5.

;+------------------------------------------------------------------------
;
; Date      : 3/16/'05
; BIOS Ver. : 2A11E
; EC Ver.   : 1A13
; VGA BIOS  : br11563.bin
;
1. Fix B-step board will hang at postcode 0x69.

2. Update new EC BIOS.

;+------------------------------------------------------------------------
;
; Date      : 3/14/'05
; BIOS Ver. : 2A11C
; EC Ver.   : 1A12
; VGA BIOS  : br11563.bin
;
1. Add Nucard plug/unplug feature.

2. Release for B-step use, Fix VGA can't display.

;+------------------------------------------------------------------------
;
; Date      : 3/10/'05
; BIOS Ver. : 2A10
; EC Ver.   : 1A12
; VGA BIOS  : br11563.bin
;
1. Add the legacy USB cmos location to 0x70 bit 0
       the PM Mode cmos location to 0x70 bit 1 ~ 3.

2. Disable MIDI 300h/310h/320h/330h for manufactory test.

3. Add Hot Dock function.

4. Add ODD reset pulse during POST.

5. Fix Boot sequence issue (#qa026).

6. Update new EC BIOS.

7. Update new product.bat for product name in CMOS.

;+------------------------------------------------------------------------
;
; Date      : 3/3/'05
; BIOS Ver. : 1C14
; EC Ver.   : 1A10
; VGA BIOS  : br11563.bin
;
1. Fix LAN UUID /Product name fail in CMOS.

2. Add GiGaLAN device in ASL.

3. Fix battery charge status can't change after plug/unplug AC.

4. Update new CPU code to support new Turion 64 CPU.

5. Update product.bat to flash correct product name.

;+------------------------------------------------------------------------
;
; Date      : 3/1/'05
; BIOS Ver. : 1C13
; EC Ver.   : 1A10
; VGA BIOS  : br11563.bin
;
1. Fix CMOS have two "Network Boot" item.

2. Fix the Cardbus have yellow mark on DOCK.

3. Update new EC BIOS.

4. Add ACER preload interface.

5. Add C2/C3 enable item in CMOS for testing.

;+------------------------------------------------------------------------
;
; Date      : 2/25/'05
; BIOS Ver. : 1C12
; EC Ver.   : 1A09
; VGA BIOS  : br11563.bin
;
1. Add new CPU P-state table for B-step.

2. Fix LAN test failure, Add PCIe IRQ route table.

3. Add serial number/Assetag Number/product name/UUID by EEPROM method.

4. Fix LAN PXE can't work.

;+------------------------------------------------------------------------
;
; Date      : 2/23/'05
; BIOS Ver. : 1C11
; EC Ver.   : 1A09
; VGA BIOS  : br11563.bin
;
1. Fix system sometimes hang postcode 18h during Suspend/resume.

2. Fix Lan's EEPROM can't write.

3. Add PXE LAN function.

;+------------------------------------------------------------------------
;
; Date      : 2/21/'05
; BIOS Ver. : 1C11A
; EC Ver.   : 1A09
; VGA BIOS  : br11563.bin
;
1. Mute/UnMute speaker during suspend/resume.

2. Fix 512MB DIMM can't detect.

3. Fix USB keyborad sometimes can't work during POST.

4. Reaaaign DOCK irq table.

5. Fix system sometimes hang postcode 81h.

6. Update new VGA BIOS.

;+------------------------------------------------------------------------
;
; Date      : 2/18/'05
; BIOS Ver. : 1C10
; EC Ver.   : 1A09
; VGA BIOS  : br11832.bin
;
1. Release BIOS for A3 board.

2. Fix the system hang at postcode 38h during DOS phlash BIOS.

3. Add HDD password  feature in CMOS.

4. Fix ATI vram size error.

5. Modify COMA, LPT ONLY exist when DOCK plugged.

;+------------------------------------------------------------------------
;
; Date      : 2/17/'05
; BIOS Ver. : 1B14A
; EC Ver.   : 1A09
; VGA BIOS  : br11832.bin
;
1. Modify code for A3 board.

2. Update new EC BIOS.

;+------------------------------------------------------------------------
;
; Date      : 2/14/'05
; BIOS Ver. : 1B13
; EC Ver.   : 1A08
; VGA BIOS  : br11832.bin
;
1. Add LID function.

2. Fix VGA BIOS version is incorrect in CMOS.

3. Fix Wireless LAN can't work in WinXP.

4. Add some Acer feature in CMOS.

;+------------------------------------------------------------------------
;
; Date      : 1/31/'05
; BIOS Ver. : 1B12
; EC Ver.   : 1A06
; VGA BIOS  : br11117.bin
;
1. Update new kenerl code.

2. Fix #qa015 for FIR issue.

;+------------------------------------------------------------------------
;
; Date      : 1/25/'05
; BIOS Ver. : 1B11
; EC Ver.   : 1A06
; VGA BIOS  : br11117.bin
;
1. MODIFY to fix QA002.

2. Add Pstate table for ACPI mode.

;+------------------------------------------------------------------------
;
; Date      : 1/24/'05
; BIOS Ver. : 1B10
; EC Ver.   : 1A06
; VGA BIOS  : br11117.bin
;
1. MODIFY to fix QA003 for system information.

2. Modify VGA's ASL code to fix coding error.

3. Modify battery method not to use smart_battery definition.

4. Update new EC BIOS.
#========================================================================#
|  Version: 1A06        Date : 01/24/2005    Author:Joms Kuan            |
|------------------------------------------------------------------------|
|  1. Ec No charge over 95%                                              |
#========================================================================#
;+------------------------------------------------------------------------
;
; Date      : 1/14/'05
; BIOS Ver. : 1A20
; EC Ver.   : 1A05
; VGA BIOS  : m26p_09.bin
;
1. Fix the system no beep when boot to DOS.

2. Fix QA003 for system information.

3. Update new VGA BIOS to fix the system hang during only CRT boot to XP.

4. Update new EC BIOS.
#========================================================================#
|  Version: 1A05        Date : 01/14/2005    Author:Joms Kuan            |
|------------------------------------------------------------------------|
|  1. Modify battery FreeDischarge                                       |
|  2. Sysspkoff function enable						 |
#========================================================================#

;+------------------------------------------------------------------------
;
; Date      : 1/10/'05
; BIOS Ver. : 1A19
; EC Ver.   : 1A04
; VGA BIOS  : br10609.bin
;
1. Fix the system hang when resume from S3.

2. Modify CMOS item string.

3. Fix CPU type can't show correctly.

;+------------------------------------------------------------------------
;
; Date      : 1/7/'05
; BIOS Ver. : 1A18T3
; EC Ver.   : 1A04
; VGA BIOS  : br10609.bin
;
1. Fix the system hang when plugged USB mouse at POST.

2. Modify CLOCK generator init value for REQBSRC4 not control.

;+------------------------------------------------------------------------
;
; Date      : 1/6/'05
; BIOS Ver. : 1A18T2
; EC Ver.   : 1A04
; VGA BIOS  : br10609.bin
;
1. Update new EC BIOS.
#========================================================================#
|  Version: 1A04        Date : 01/06/2005    Author:Joms Kuan            |
|------------------------------------------------------------------------|
|  1. Modify battery voltage value                                       |
#========================================================================#

2. Fix the USB/IDE performance issue.

;+------------------------------------------------------------------------
;
; Date      : 1/5/'05
; BIOS Ver. : 1A18
; EC Ver.   : 1A03
; VGA BIOS  : br10609.bin
;
1. Fix the incorrect setting for PCICLK.

;+------------------------------------------------------------------------
;
; Date      : 1/5/'05
; BIOS Ver. : 1A17
; EC Ver.   : 1A03
; VGA BIOS  : br10609.bin
;
1. Fix LAN can't work.

;+------------------------------------------------------------------------
;
; Date      : 1/5/'05
; BIOS Ver. : 1A16
; EC Ver.   : 1A03
; VGA BIOS  : br10609.bin
;
1. Update new EC BIOS.
#========================================================================#
|  Version: 1A03        Date : 01/04/2005    Author:Joms Kuan            |
|------------------------------------------------------------------------|
|  1. Modify SWAP BAY INSERT function                                    |
|  2. Add battery model SMP and SANYO charge     			 |
#========================================================================#

2. Change EC iobase to 4Eh, SIO iobase to 2Eh.

;+------------------------------------------------------------------------
;
; Date      : 12/31/'04
; BIOS Ver. : 1A15
; EC Ver.   : 1A02
; VGA BIOS  : br10609.bin
;
1. Fix SIO can't detect.

;+------------------------------------------------------------------------
;
; Date      : 12/29/'04
; BIOS Ver. : 1A14
; EC Ver.   : 1A02
; VGA BIOS  : br10609.bin
;
1. Fix ODD cdrom can't detect.

2. Fix AMD CPU 3400+ can't work.

;+------------------------------------------------------------------------
;
; Date      : 12/28/'04
; BIOS Ver. : 1A13
; EC Ver.   : 1A02
; VGA BIOS  : br10609.bin
;
1. Fix ODD cdrom can't detect.

2. Fix SIO can't detect.

3. Fix HDD detect slowly.

4. Add modem ssid/svid.

5. Combine new EC code.

#========================================================================#
|  Version: 1A02        Date : 12/27/2004    Author:Joms Kuan            |
|------------------------------------------------------------------------|
|  1. Fix press power button 4 seconds power off then power on           |                 			
|  2. Fix SCI always keep low						 |
|  3. Add SWAP BAY INSERT function					 |
#========================================================================#
#========================================================================#
|  Version: 1A01        Date : 12/24/2004    Author:Joms Kuan            |
|------------------------------------------------------------------------|
|  1. First edition                      	                         |
|  2. Modify DNBSWON,SUSON,MAINON,VRON 		                         |
|  3. Add NB_PWRGD for ATI chipset			                 |                       			
#========================================================================#

;+------------------------------------------------------------------------
;
; Date    : 12/26/'04
; Ver.    : 1A11
;
1. First release


