Change History:
1. Fix S3/S4 issue by modified PMIO reg50=0,reg51=c,reg68=0x4c.
2. Remove unused ASL code.
3. Remove HDD smart function by Eric suggestion.
    And BIOS will add code back after the Phoenix and Seagate work completely.
4. Remove CMOS item "C State Configuration".

To flash in Windows mode, pls install Winflash utility as in Winflash.zip.
To flash in pure DOS mode, pls run: PHLASH16 xxx.WPH /mode=3 /S

P.s.
If you're using DOS bootable floppy (w/o himen.sys) created in Windows XP, 
you will get an error like "can't present memory manager" while you 
update the BIOS (ie himen.sys)

You may do either one of the two ways to resolve:
1. press F5 to bypass himem.sys 
2. modify the parameter from /S to /X 

The parameter  /X  for PHLASH is "Ignore XMS memory manager check".
The parameter /S PHLASH is "Silent operation (Turn off speaker)".
