#========================================================================#
|  Version: 0.24        Date : 07/25/2006    Author:Joms Kuan	         |
|------------------------------------------------------------------------|
|  1.Fixed Panasonic can't charge(full charge pull out and plug in other |
|    same battery model charge charge					 |
#========================================================================#
#========================================================================#
|  Version: 0.23        Date : 07/21/2006    Author:Joms Kuan	         |
|------------------------------------------------------------------------|
|  1.Modify thermal table				 	 	 |
|  2.Fixed insert Docking can't power on				 |
#========================================================================#
#========================================================================#
|  Version: 0.22        Date : 07/17/2006    Author:Joms Kuan	         |
|------------------------------------------------------------------------|
|  1.Fixed avoid detect wrong battery name		 	 	 |
#========================================================================#
#========================================================================#
|  Version: 0.21        Date : 07/17/2006    Author:Joms Kuan	         |
|------------------------------------------------------------------------|
|  1.Modify thermal table						 |
|  2.Modify High G value to 1.2G					 |
|  3.Modify G sensor for H/W RAMP					 |
#========================================================================#
#========================================================================#
|  Version: 0.20        Date : 07/07/2006    Author:Joms Kuan	         |
|------------------------------------------------------------------------|
|  1.Modiyf ThrottleOn/ThrottleOff On/Off point				 |
#========================================================================#
#========================================================================#
|  Version: 0.19        Date : 07/04/2006    Author:Joms Kuan	         |
|------------------------------------------------------------------------|
|  1.Modiyf LED has dark gradually in 40 seconds after enter ACPI mode	 |
#========================================================================#
#========================================================================#
|  Version: 0.18        Date : 06/23/2006    Author:Joms Kuan	         |
|------------------------------------------------------------------------|
|  1.Fixed temperature under 55 CPU speed can't resume			 |
#========================================================================#
#========================================================================#
|  Version: 0.17        Date : 06/22/2006    Author:Joms Kuan	         |
|------------------------------------------------------------------------|
|  1.Change Low G / High G to 26pin (PortD0) 24pin (PortE6)		 |
#========================================================================#
#========================================================================#
|  Version: 0.16        Date : 06/16/2006    Author:Joms Kuan	         |
|------------------------------------------------------------------------|
|  1.Change High pin from PA0 to PE6 for H/W C stage	  		 |
|  2.Turn half light 20 seconds after entering ACPI mode  		 |
#========================================================================#
#========================================================================#
|  Version: 0.15        Date : 06/14/2006    Author:Joms Kuan	         |
|------------------------------------------------------------------------|
|  1.Modify FFLatch and MOTLatch function(not auto clear  		 |
#========================================================================#
#========================================================================#
|  Version: 0.14        Date : 06/07/2006    Author:Joms Kuan	         |
|------------------------------------------------------------------------|
|  1.Modify fan table			 				 |	
|  2.Add battery temperature over 60 degrees Throttle function 		 |
#========================================================================#
#========================================================================#
|  Version: 0.13        Date : 05/30/2006    Author:Joms Kuan	         |
|------------------------------------------------------------------------|
|  1.Modify battery bridge support 90 seconds 				 |	
|  2.Fixed F6 LED S4,S5 on						 |
|  3.Add 6C command for 3G function					 |	
|  4.Change 3G Enable /  Disable scan code				 |	
|  5.Modify fan table							 |
|  6.Add Qevent 9C/9D, ThrottleOn/ThrottleOff				 |
#========================================================================#

#========================================================================#
|  Version: 0.12        Date : 05/23/2006    Author:Joms Kuan	         |
|------------------------------------------------------------------------|
|  1.Add 6C Command A0~A8 for thermal tools				 |	
|  1.Modify brightness table highest to 3V				 |
#========================================================================#
#========================================================================#
|  Version: 0.11        Date : 05/09/2006    Author:Joms Kuan	         |
|------------------------------------------------------------------------|
| 1. Support Panasonic charge current 1.8mA				 |
#========================================================================#
#========================================================================#
|  Version: 0.10        Date : 04/03/2006    Author:Joms Kuan	         |
|------------------------------------------------------------------------|
| 1. Support charge 0.8C						 |
| 2 .Add Check New Card function 					 |
| 3. Modify CRT low active						 |
#========================================================================#
#========================================================================#
|  Version: 0.09        Date : 04/21/2006    Author:Joms Kuan	         |
|------------------------------------------------------------------------|
| 1. Modify Battery bridge timer					 |
#========================================================================#
#========================================================================#
|  Version: 0.08        Date : 04/20/2006    Author:Joms Kuan	         |
|------------------------------------------------------------------------|
| 1. Modify 3G scan code						 |
| 2. Modify 3G enable command 8B, disable command 8C			 |
#========================================================================#
#========================================================================#
|  Version: 0.07        Date : 04/19/2006    Author:Joms Kuan	         |
|------------------------------------------------------------------------|
| 1. Fixed 3G can't disable						 |
| 2. Add 3G attached bit 						 |
| 3. Add 3G enable command 20, disable command 21			 |
#========================================================================#
|  Version: 0.07d        Date : 04/18/2006    Author:K.K.Chien           |
|------------------------------------------------------------------------|
| 1. BATBridge_SUPPORT enable						 |
| 2. change ThreeG_on ThreeG_off low high active			 |
#========================================================================#
|  Version: 0.07c        Date : 04/17/2006    Author:K.K.Chien           |
|------------------------------------------------------------------------|
| 1. BATBridge_SUPPORT disable						 |
#========================================================================#
|  Version: 0.07b        Date : 04/17/2006    Author:K.K.Chien           |
|------------------------------------------------------------------------|
| 1. change s5_on rsmrst delay to 20ms					 |
| 2. change HWPG and NB_PWRGD delay to 200ms				 |
| 3. change DA_LEDSET middle value to 90				 |
| 4. disable lan power							 
#========================================================================#
|  Version: 0.06        Date : 04/07/2006    Author:Joms Kuan            |
|------------------------------------------------------------------------|
|  1.Remove debug code							 |
|  2.Fixed system shutdown back light auto enable			 |
#========================================================================#
#========================================================================#
|  Version: 0.05        Date : 04/04/2006    Author:Joms Kuan            |
|------------------------------------------------------------------------|
|  1.Modify F6LED CODE							 |
|  2.Modify 3G scan code						 |
|  3.Modify battery name						 |
|  4.Fixed battery can't auto learning					 |
#========================================================================#
#========================================================================#
|  Version: 0.04        Date : 03/31/2006    Author:Joms Kuan            |
|------------------------------------------------------------------------|
|  1.Fixed battery can't charge						 |
|  2.Fixed after flash can't power on					 |
#========================================================================#
#========================================================================#
|  Version: 0.03        Date : 03/31/2006    Author:Joms Kuan            |
|------------------------------------------------------------------------|
|  1.Moidfy AMD CPU power timer						 |
|  2.Add Port replicator function					 |
|  3.Add Ferrari LED function						 |
|  4.Add 3G function							 |
|  5.Modify D-sub function debounce timer				 |
|  6.Add battery bridge function					 |
#========================================================================#
#========================================================================#
|  Version: 0.02        Date : 03/23/2006    Author:Joms Kuan            |
|------------------------------------------------------------------------|
|  1.Add D-sub function							 |
|  2.Modify D/C LOW active						 |
#========================================================================#
#========================================================================#
|  Version: 0.01        Date : 03/15/2006    Author:Joms Kuan            |
|------------------------------------------------------------------------|
|  1.Bring Up 								 |
#========================================================================#

