+============================================================================+
			JALA0 Release Note
+============================================================================+
BIOS CORE Version ................  Insyde EFI 2.0
CPUs Supported    ................  Intel Penryn 1067/800 MHz
Chipset           ................  Intel Cantiga
Bridge            ................  Intel ICH9M
Video             ................  UMA / ATI / nVidia
LCD Size          ................  14 TFT WXGA
Memory            ................  DDR2 667/800 MHz
HDD               ................  SATA
ODD               ................  SATA
PCMCIA            ................  O2 OZ601
Card Reader       ................  JBM385 (5in1)
1394 controller   ................  N/A
Audio             ................  HD Audio Realtek ALC268
LAN               ................  Broadcom BCM5764M
KBC               ................  ENE 926
Clock Generator   ................  ICS9LPRS387
Super I/O         ................  N/A
BIOS ROM Part	  ................  MX25L8005M/ EN25F80
Finger print	  ................  Upek TCS4E
+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 05/21/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V1.02                                                 |
|   KBC BIOS Version   : V1.02                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : 1625                                                  |
|   Kernel Version     : 2036                                                  |
|   Cantiga Version    : 0.87                                                  |
|   Ich9m Version      : 1.15                                                  |
|   MRC Version        : 1.00                                                  |
|   PPM Version        : 1.01	                                               |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : Pre-mp Build                                          |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      :    D16Fh                                              |
+==============================================================================+
BIOS:
    1) Fix Robson test fail.
    2) Fix can't detect memory card if card reader enter D3E.
    3) Modify DTS fan table for thermal team request.
    4) Update DTS function to support TJ90 cpu.
    5) Change temperature address of CeCTe.
    6) Fix Hdcp.exe read error key.
    7) Disable CapsLock / NumLock /ScrLock keys when into PBA option rom.
    8) Fix PBA function doesn't enable when flash BIOS.
    9) Fix can't wake on LAN.

EC:
    1) Fix Fn+F6 sometimes no function issue.
    2) Add workaround for Finger Printer PBA function.

+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 05/14/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V1.00                                                 |
|   KBC BIOS Version   : V1.00                                                 |
|   VGA BIOS(uma)      : 1625                                                  |
|   Kernel Version     : 2034                                                  |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : C Build                                               |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      : C240H                                                 |
+==============================================================================+
BIOS:
    1). Release for Golden.
EC:
    None
+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 05/12/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.25                                                 |
|   KBC BIOS Version   : V0.25                                                 |
|   VGA BIOS(uma)      : 1625                                                  |
|   Kernel Version     : 2034                                                  |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : C Build                                               |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      : 7D1CH                                                 |
+==============================================================================+
BIOS:
    1) Modify SMBIOS Type 2 product name and follow Type 1 Product name.
    2) Implement System states of ASF funciton.
    3) Modify Pci Express Port 0 /Port 2 ASPM valud and disable L0s on AC mode.
   
EC:
    1) Fix one key of JP keyboard no function.
+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 05/08/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.24                                                 |
|   KBC BIOS Version   : V0.24                                                 |
|   VGA BIOS(uma)      : 1625                                                  |
|   Kernel Version     : 2034                                                  |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : C Build                                               |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      :  E1F5H                                                |
+==============================================================================+
BIOS:
    1) Implement Dummy ODD support.
    2) Fix INT15 function can't detect Chicony CCD.
    3) Fix Int15 can't execute under Xp.
    4) Set Pre allocat Memory to 64M
    5) Fix ccd will lose on S4 resume with enable seamless usb.
    6) Fix D2D function when set HDD password.
    7) Fix DTM IO test fail.
    
EC:
    1) Modify BT/WL status behaviors follow new BIOS SPEC.(WL on/BT off when cold/warm boot into OS.)

+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 04/30/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.23                                                 |
|   KBC BIOS Version   : V0.23                                                 |
|   VGA BIOS(uma)      : 1625                                                  |
|   Kernel Version     : 2034                                                  |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : C Build                                               |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      :  A895H                                                |
+==============================================================================+
BIOS:
    1) Fix flash bios will lost HDCP ksy
    2) Fix B2 step chipset can't install RTM6000.
    3) Fix S4 resume time fail under Windows Xp.
    4) Fix INT15 can't work under WINPE/XP mode.
    5) Fix S3 resume can't unlock HDPSWD after system restart.(CCIC199)
    6) Disable dynamic FSB.
EC:
    1) Modify DVI signal set high delay 300ms and set low delay 1sec.

+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 04/24/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.22                                                 |
|   KBC BIOS Version   : V0.22                                                 |
|   VGA BIOS(uma)      : 1625                                                  |
|   Kernel Version     : 2034                                                  |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : C Build                                               |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      :  89B0H                                                |
+==============================================================================+
BIOS:
    1) Enable Intel PAVP funciton
    2) Fix while winflash, speaker makes bobo abnormal sound
    3) Implement D3E function
    4) Fixed hang on windows bar
    5) Implement Japan keyboard support
    6) Fix S3 resume hang when DTM testing
    7) Implement DOS throttle
    8) Update Intel VBIOS V1625
EC:
    1) Modify BT/WL keep status function follow new BIOS SPEC
    2) Modify throttling refer to CPU DTS and T-diode on ACPI mode
    3) Add Pin GPIOB, GPIOC, EC_ACIN and control function  
    
+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 04/16/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.21                                                 |
|   KBC BIOS Version   : V0.21                                                 |
|   VGA BIOS(uma)      : 1618                                                  |
|   Kernel Version     : 2034                                                  |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : C Build                                               |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      :  0186H                                                |
+==============================================================================+
BIOS:
    1) Solve PBA enabled status in System Settings became disabled after S3 resume  
    2) Fix "if enable EHCI wake up function, blue tooth device will lost after resume from s3/s4.
    3) Fix press F2 can't into scu after display "acer" Logo
    4) Update Microcode 1067A
    5) Fixed Windows Xp can't recognize battery 
    6) Windows Xp Hibernate can't recognize battery from S3
    7) Implement Battery Device name
    8) Disable PBA when enter SCU for meet spec
    
EC:
    Modify power sequence for S3 shutdown issue.



+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 04/09/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.20                                                 |
|   KBC BIOS Version   : V0.20                                                 |
|   VGA BIOS(uma)      : 1618                                                  |
|   Kernel Version     : 2033                                                 |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : C Build                                               |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      :  EB52H                                         |
+==============================================================================+
BIOS:
    1) Fix wait long time to power on system when press power button.
    2) In DOS, disable two Japanese keys whose scancodes are 0x73 and 0x7d
    3) Fix hang on SMT F/T when switch boot patition.
    4) Fix Broadcom reduce power consumption issue, it will make system hang.
EC:
    1) Modify EC Beep frequency to 500 MHz.
    2) Modify fan control by T-diode if DTS is zero.

+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 04/02/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.19                                                 |
|   KBC BIOS Version   : V0.19                                                 |
|   VGA BIOS(uma)      : 1604                                                  |
|   Kernel Version     : 2032                                                  |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : C Build                                               |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      : B5E4h                                                 |
+==============================================================================+
BIOS:
    1) Improve Power consumption
    2) Update Kernel code to 2032
    3) Implement DTS function
    4) fix system no run garbage code at post time with Robson card,if shutdown system 
       by press power button 4sec(for JAL90 & JALA0)
    5) Implement battery serial number
    6) Implement report s3 and s4 power consumption on WMI
    7) Reduce POST time
    8) Change HDPSW Status to "Froze" and disable "Set HD Password" function after HDD Frozen
    9) Solve Enter Setup Asset Tag shows abnormal when write Asset Tag
   10) Password must be reserved when users enter the flash command
   11) Implement battery serial number.
   12) Implement report s3 and s4 power consumption on WMI.
   13) Add get fingerprint state of Acer Feature
   14) Fix Characters typing for password meet SPEC
EC:
    1) Modify LCD power sequence for DPST function.
	  2) Modify workaround for hang on Windows bar to 50 sec.
	  3) Modify fan control table follow"JAL90_JALA0_C_Stage_Thermal Control Table_2008_0328_v7.xls".
	  
+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 03/27/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.18                                                 |
|   KBC BIOS Version   : V0.18                                                 |
|   VGA BIOS(uma)      : 1604                                                  |
|   Kernel Version     : 2031                                                  |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : C Build                                               |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      : CB6Ah                                                 |
+==============================================================================+
BIOS:
    1) Fix new card hot plug some time occur blue screen 0xD1 issue.
    2) Fix Pci Express SVID.
    3) Disable Deep C4 and C6 if CPUID is 10674.
    4) Fix UMA platform can't adjust backlight.
    5) Fix UMA perfermance can't meet spec.
    6) Remove string limitation for Asset Tag.

EC:
  1) Add DVI signal control.
  2) Add read battery Manufacture Date.
  3) Add workaround for hang on Windows bar.
  4) Fix warm boot after press Arcade button on Windows mode will into IO Arcade mode.

+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 03/25/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.17                                                 |
|   KBC BIOS Version   : V0.17                                                 |
|   VGA BIOS(uma)      : 1604                                                  |
|   Kernel Version     : 2031                                                  |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : C Build                                               |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      : 8132h                                                 |
+==============================================================================+
BIOS:
  1) Fix HDD password will be clear after change HDD password unsuccessfully.(BCIC308)
  2) Fix hang on Acer logo problem.
  3) Fix VBIOS issue for plug HDMI cable during post time cause HDMI switching abnormal.
  4) Modify flash tool to support check BIOS model name.
  5) Change HDPSW Status to "Froze" and disable "Set HD Password" function after warmboot system.
     (BCIC312 & BCIC313)
  6) Clean Supervisor and User password when short CMOS RTC_RST pin.
  7) Reduce post time.
  8) Disable ASLM for nVidia VGA.
  9) Implement panel "AUO B141PW03 V1".
  10) Fix ePower can't get Battery Manufacturer name.
  11) Improve power consumption.
  12) Fix the most input Hddpassword character can't exceed 8 characters.
  13) Fix blue tooth will lost after resume from S4 or S3.
  14) Fix hang on during download WinPE.
  15) Update kernel 2029 to 2030.
  16) Update kernel 2030 to 2031.
  17) Fix system hang during via INT15 to get Panel Resolution.
  18) Implement VBIOS 1604
  19) Fix system no sound on DOS mode.

EC:
  1) Fix CCIC013: Press Fn+Home/Pg Up/Pg Dn/End,it will have function same as Media key.
  2) Modify power sequence for ASF 2.0 function.

+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 03/12/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.16                                                 |
|   KBC BIOS Version   : V0.16                                                 |
|   VGA BIOS(uma)      : 1598                                                  |
|   Kernel Version     : 2029                                                  |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : C Build                                               |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      : 6DA5h                                                 |
+==============================================================================+
BIOS:
  1) Modify boot to hdd directly, no need to ask hdd paswd again,
     if Hdd paswd is the same as User/Supervisor paswd.
  2) Fix fingerprinter function fail on ATI platform.
  3) Fix PBA function abnormal.(BCIC293)
  4) Write HDCP Key to cmos for tool read.
  5) Change Acer logo for C Build.
  6) Implement EON 25F16 flash part.
  7) Disable Boot Menu show [EFI Boot Option List](Vista x64 install disc)
  8) Update Intel VBIOS V1598.
  9) Disable "Dynamic FSB Switching" to fix some long run issue.
  10) Fix "Fn" hot key fail in Windows.
  11) Update Kernel 2027 to 2028.
  12) Update Kernel 2028 to 2029.

EC:
  1) Add read manufacture id of CPU thermal sensor.

+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 03/05/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.15                                                 |
|   KBC BIOS Version   : V0.15                                                 |
|   VGA BIOS(uma)      : 1588                                                  |
|   Kernel Version     : 2027                                                  |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : B Build                                               |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      : 694Dh                                                 |
+==============================================================================+
BIOS:
  1) Reduce Post time.
  2) Speed up BIOS ROM flash time.
  3) Fixed setting hdd password can't auto-restart on DC mode.
  4) Fix INT15 can't work under WINPE/XP mode.
  5) Disable "Fn" hot key function on setup meun.
  6) Enable Power button support.
  7) Update Kernel 2026 to 2027.

EC:
  1) Modify disable "Fn" hot key function on Setup Menu.

+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 02/27/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.14                                                 |
|   KBC BIOS Version   : V0.14                                                 |
|   VGA BIOS(uma)      : 1588                                                  |
|   Kernel Version     : 2026                                                  |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : B Build                                               |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      :    7D6D                                               |
+==============================================================================+
BIOS:
  1) Set HDD park before "set/clear HDD password then save&exit" in SCU.
  2) Clear info string before into SCU/BootManager
  3) Fixed S4 resume will show "windows boot manager".
  4) Fix when press F2 or F12 key during POST, there is a "!" sign on the screen.
  5) Correct setup menu message for meet spec.(BCIC235)
  6) Fix Hot plug function can't control by Setup menu.
  7) Solved F10 function will cause white block when save ready and then exit the SCU before the some SCU items be change.
  8) User password can the same as supervisor password for meet spec
  9) Fix "Sku4 and Sku5. Set closing lid as Do nothing, close lid and open, there will be a blackscreen."
 10) Implement fringer printer PBA function. it's function wasn't workable on ATI platform now!
EC: 
  1) Cypress media board's "play" button has no function and the LED will be light on after resume from S3/S4
  2) Cypress media board will be detonated after close the LCD
 
+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 02/14/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.13                                                 |
|   KBC BIOS Version   : V0.13                                                 |
|   VGA BIOS(uma)      : 1588                                                  |
|   Kernel Version     : 2026                                                  |
|   Flash Utility Ver  : 1.2a                                                  |
|   Phase Status       : B Build                                               |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      :   064A                                             |
+==============================================================================+
BIOS:
  1) Fix "Setup Utility" flickers after users load defaults.
  2) Update HDMI switch strength.
  3) Setting Manufacturer Name to "Acer" on Smbios Type 01,02.
  4) Solve some bored issue.
  5) Fix Enter S4 will occur blue screen with code A0 with password set in BIOS Security.
  6) Implement Usb wake up function on Docking.
  7) Fix the screen on Boot Menu flickers after "ESC" is pressed.
  8) Implement Acer Battery WMI function.
  9) Fix Boot Order in SCU cannot be controlled in supervisor mode after someone opens SCU in user mode.
  10) Update Intel VBIOS 1588 and correct Post logo color.
  11) Modify display string for F2/F12 function.
  12) Disable SATA hot plug function.
  13) Fixed SMbios Type0,1,2,3,4,7,11,12 string.
  14) Add  SMbios  Type10&Type22
  15) Fix F10 no function when enter setup with user password.
  16) Fix pressing "V", "S" or "W" could change boot option in Boot Manager.
  17) Fix input password conform Acer Feature(password not case sensitive).
  18) Fix power on password  conform Acer Feature
  19) Implement HDCP key function.
EC:
   1) Modify BT power on time - BT power on after VR_ON power on.
   2) Enable Deep Sleep function.
  
+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 02/14/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.12                                                 |
|   KBC BIOS Version   : V0.12                                                 |
|   VGA BIOS(uma)      : 1573                                                  |
|   Kernel Version     : 2026                                                  |
|   Flash Utility Ver  : 1.2a                                                  |
|   Phase Status       : B Build                                               |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      :  EB2E                                                |
+==============================================================================+
BIOS:
  1) Fixd setup menu's Hdd password serial not match reality.
  2) Modify to Load Default Setting of Acer Feature.
  3) Modify to Get TouchPad Status of Acer Feature.
  4) Solve USB Port delay when insert some CCD Camera.
  5) Fix input password issue when the input charecter is not Acer Feature.
  6) Modify to get Mail Led Status of Acer Feature.
  7) Fix boot sequence can not load default by press F9.
  8) Fix Boot Menu show abnormally while EFI boot devices exist(Vista x64 install disc).
  9) Fix the screen on Boot Menu flickers after any device is chosen.
  10) Fix the most input password character can't exceed 8 characters.
  11) Fixed Led config error when PXE boot.
  12) Solve CPU P-State enable will cause system S4/S5 stop.
  13) Update Hdmi switch strength.
  14) fix nVidia VGA and 4G memory issue
  15) Modify system information for Copyright
     
EC:
  1) Update KB926 common source code V40.
  2) Modify S4 LED status follow "Acer notebook LED Spec v1.8.xls" 
  3) Modify data type of LI_BattCurrentLimited.
+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 02/05/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.11                                                 |
|   KBC BIOS Version   : V0.11                                                 |
|   VGA BIOS(uma)      : 1573                                                  |
|   Kernel Version     : 2026                                                  |
|   Flash Utility Ver  : 1.2a                                                  |
|   Phase Status       : B Build                                               |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      : 1E36h                                                 |
+==============================================================================+
BIOS:
  1) Fixed PCI express-Lan card can't be detect when insert it in S3 mode.
  2) Add Nvidia NB9P-GE2 string to setup menu.
  3) Implement JMB385 D3E function.
  4) modify to Get/Set/En BlueTooth device status of Acer Feature.
  5) modify to Get/Set/En 802.11 device status of Acer Feature.
  6) modify to Check Adapter Status of Acer Feature.
  7) Modify MXM setting for nVidia request.
  8) Implement HDD password item.
  9) Disable S4 wake up function of modem.
  10) Fill Fake MAC address,when no MAC address(for speed up product line).
  11) Correct Nvidia chipset string on setup menu.
  12) update Verb Table For disable Realtek HDMI from UI.
  13) modify to get boot BootSequence of int15 function.
  14) modify to get CCD type of int15 function.
  15) modify to Get IDE drive type of int15 function.
  16) modify to Set FirstBoot Device of int15 function.
  17) Remove Bluetooth wake function.
  18) Follow the ACER new request, update setup menu setting.
  19) Solve D2D function fail.
  20) Fix when resume from s3, Verb table will lose.
  21) modify to HotKey String dispear when press morn than once hotkey.
  22) Update MXM structure for nVidia request.
  23) Completely display the item "CPU type" of Setup Menu.
  24) Solved the skill 076's Menu item error at "VGA BIOS Version" of Setup Menu.
  25) Clear the Help region when change the page of Setup Menu.  
  26) Fix Crisis can't work.
  27) Fixed WMI battery function Fail.
  28) 1.Fix password of Acer Feature and Add Wireless device of Acer Feature 
  29) Update Microcode.(CPUID = 10676 .Reversion: 60C)
  30) Fix whtn Boot order in boot menu will be crazy while pressing ESC key.
  31) Fix Winxp can't use lid function.
  32) modify to Get Asset Tag of Acer Feature
  33) update USB code for chipset update.
  34) Fix Panel can't be turn on if via USB mouse to resume from s3.
  35) Fix setup memory over 2G, system can't boot up.
  
EC:
  1) Fix BCIC003: LCD no bright except you press Fn+F6 twice to adjust the brightness.
  2) Modify disable low beep alarm on ACPI mode.
  3) Modify do not send scancode of Fn+F4/Dollar sign/Euro sign/Fn+left/Fn+right on DOS mode.
  4) Add save SBDAT BatteryMode(0x03) to EC namespace 0x08-0x09.
+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 01/09/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.07                                                 |
|   KBC BIOS Version   : V0.07                                                 |
|   VGA BIOS(uma)      : 1573                                                  |
|   Kernel Version     : 2023                                                  |
|   Flash Utility Ver  : 1.2a                                                  |
|   Phase Status       : B Build                                               |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      : 25ECh                                                 |
+==============================================================================+
BIOS:
  1) Fix can't install Vista in HDD AHCI mode.
  2) Correct Nvidia chipset string on setup menu.
  3) Add Brightness WMI function on Vista.
  4) Update MXM structure for nVidia request.
  5) Solved the skill 076's Menu item error at "VGA BIOS Version" of Setup Menu.
  6) modify to HotKey String dispear when press morn than once hotkey
  7) fix when resume from s3, Verb table will lose.
  8) Sometime can't correct adjust Brightness on POST.
  9) After crisis, system will not auto restart.

EC:
  1) Update KB926 common source code V39.
  2) Modify SPI ROM SIZE 2M.
  3) Modify BATTERY_OVP to 1.4985V follow
   ) "JALA0 SW parameter VerX02(JALC0).doc".
  4) Enable WatchDog function.
  5) Disable fan full on, and update fan control table follow
     "JAL90_JALA0_B_Stage_Thermal Control Table_2008_0107_v2.xls".

+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 01/02/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.06                                                 |
|   KBC BIOS Version   : V0.06                                                 |
|   VGA BIOS(uma)      : 1573                                                  |
|   Kernel Version     : 2023                                                  |
|   Flash Utility Ver  : 1.2a                                                  |
|   Phase Status       : A Build                                               |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      : CF70h                                                 |
+==============================================================================+
BIOS:
  1) Add s3 resume fill verbtable and modem.
  2) Change the Menu function key and direction of choice from F5 to F6.
  3) Disable C-States at Setup Menu.
  4) Disable PEG ASPM.
  5) Added load default function when short CMOS RTC_RST pin.
  6) Fix when enable PXE, can't entry setup menu.
  7) Restore Lan's SVID when S3 resume.
  8) Disable dynamic fsb switching at Setup Menu.
  9) Implement TouchPad PnPID.
  10) Implement Acer WMI function.
  11) Update MXM structure.
  12) Implement CRISIS function.
  13) Fix the boot order scrabble on setup menu.
  14) Change setting "Numlock" to OFF at setupmenu.
  15) Change setting "Network Boot" to ENABLE at setupmenu.
  16) Fix after run "Load Optimal Defaults" and saving this settingwith reset system,
      sometimes the boot order will failed.
  17) Added load default function when short CMOS RTC_RST pin.
  18) Fix can't wake on ring.
  19) Fix when resume from S4, can boot from LAN.
  20) Modify Boot Priority.

EC:
  1)Add ADP_I function.(UMA:65W, Discrete:90W)
  2)Add Cable sensor function.(ENERGY_DET: EC Namespace 0x00 bit3)
  3)Add read VGA T-Diode temperature.
  4)Add "write 0x15 to thermal sensor 0x27" to support SMSC use on
    Penryn CPU.

+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 12/25/07  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.05                                                 |
|   KBC BIOS Version   : V0.05                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      :                                                       |
|   Kernel Version     :                                                       |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : A Build                                               |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      : 5B1Ah                                                 |
+==============================================================================+
BIOS:
  1) Modify Setup menu for Acer style.
  2) Implement Acer WMI function.
  3) Implement Acer Int15 function.
  4) Enable Fan always on before flash bios.
  5) Fix "resume from s4. WLAN can't find any network".
  6) Fix "Resume from s4. BT will auto enable.(But, LED and switch is disable)"
  7) Fix "Card Reader no function"
  8) Fix "After install  PCMCIA dirver (Xircom Ethernet II 10/100), system will hang-up"
  9) Fix "Sometimes entery BIOS setup menu, Internal keyboard will hang-up.(But, Internal keyboard can work after plug-in usb keyboard)"

EC:
  1) Modify Wireless/Bluetooth device status behavior.

+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 12/14/07  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.04                                                 |
|   KBC BIOS Version   : V0.04                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      :                                                       |
|   Kernel Version     :                                                       |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : A Build                                               |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      : FBB9h                                                 |
+==============================================================================+
BIOS:
  1) Update VBIOS 1573
  2) Fix "Have a High Definition Audio Device" on device manager system devices and show "!".
  3) Fix when diskable F12 function on setup menu, user still can press F12 start Boot manager.
  4) Fix after resume from S3, BT will auto enable on system.
  5) Fix After resume from S3, VGA -HDMI port output no screen.
  6) Support EON EN25F80 flash part
  7) Modify driver strength for HDMI switch
  8) update Audio Verb Table.

EC:
  1) Fix Fn+UP/DOWN
  2) Fix Battery TS over temperature shutdown.
  3) Modify brightness table.

+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 12/07/07  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.03                                                 |
|   KBC BIOS Version   : V0.03                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      :                                                       |
|   Kernel Version     :                                                       |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : A Build                                               |
|   Clock Generator(discrete): 01h,85h,ech,fCh,CFh,CBh,03h,11h,50h,E5h,7dh,11h |
|   Clock Generator(UMA) : 01h,85h,ECh,F4h,FFh,CBh,03h,11h,50h,E5h,7dh, 11h    |
|   Checksum (FD)      : A031h                                                 |
+==============================================================================+
BIOS:
  1) Implement Variable Function.
  2) Filled HDA controller SVID.
  3) Filled Peg Vga Audio codec controller SVID.
  4) Modify Wireless Lan Class range for BCM Wlan class type
     for solve WLAN can't enable by WLAN on/off button.
  5) Fix system can't resume from s3.
  6) Implement CardBus function.

EC:
  1) Add Media button function.

+==============================================================================+
|   MODEL NO. :  JALA0                                RELEASE DATE : 12/04/07  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.02                                                 |
|   KBC BIOS Version   : V0.02                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      :                                                       |
|   Kernel Version     :                                                       |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : A Build                                               |
|   Clock Generator(discrete): 01h,85h,ech,fdh,ffh,f0h,33h,11h,d0h,C5h,7dh     |
|   Clock Generator(UMA) : 01h,85h,ech,fdh,ffh,f0h,33h,11h,d0h,C5h,7dh         |
|   Checksum (FD)      : 4670h                                                 |
+==============================================================================+
BIOS:
  1) Modify HDMI Switch.
  2) Post code 0xCC speed up.
  3) Modify wake on modem ring function & open PXE boot function.
  4) Implement Pci-E New Card Hot Plug.
  5) Fixed After install VGA driver, display will change to D-Sub only.
  6) Fix press power button system shutdown right now on bios logo screen.

EC:
  1) Fix LEFT/RIGHT key behavior. 
  2) Fix Fn+UP/Fn+DOWN hot key behavior.