Please follow the below steps to update BIOS:

1. DOS mode 
      Step 1: In Windows mode , please make a new folder "c:\bios" and download fmb104ww.zip file to this folder.
      Step 2: Extract fmb104ww.zip under this folder.   
      Step 3: Get/create a bootable disk.
      Step 4: Insert the bootable disk into floppy drive (or external USB floppy drive) connected to the unit and reboot the system. 
      Step 5: Press <F2> to enter BIOS setup, choose [Boot] on the top menu, follow the instructions to select "Floppy Drive" as first boot device, then save setting and reboot.  Please make sure to enable [Legacy USB Support] in Advanced page if you use external USB floppy drive.
      Step 6: Go to directory "c:\bios" and execute the batch file MOR104.bat to update BIOS in DOS mode

2. Windows Mode
   Step 1: Please download fmb104ww.zip file to Windows desktop.
   Step 2: Choose fmb104ww.zip icon and use mouse right key to select "Extract All..." to decompress this file.   You will get  MOR104.bat. 
   Step 3: Execute MOR104.bat and follow the instructions to update BIOS.

3. Revise histrory: 
BIOS v1.04
1. Modify DMI Table type 4: External Clock 
2. Remove Japanesse Keyboard
3. Fix wrong battery information
4. Patch Method(C2K) to avoid system sometimes critical shutdown issue. 

BIOS v1.03
1. Update KBC to fix lid close can power on issue

BIOS v1.02
1. System cann't boot from USB Floppy
2. AA1625 : ECT, 2K system can not install
3. Add VGA Off (S4, S5)  and update VBIOS alv12275.mor for LCD Power Sequence 
4. Modify INT15 Parallel Port status
5. VRAM size default as 128MB
6. Modify External Clock in DMI table type 4 
7. update thermal & fan table setting for TJ100/TJ85 CPU
8. Fix Hotkey Hibernation resume, system sometimes have Battery Critical Low Shutdown issue (Battery Mode only)
