Release note:

+===============================================================================+
| MODEL NO. :  HDQ70                               RELEASE DATE : 09/21/2005   	|
|-------------------------------------------------------------------------------|
|   Major Version     : 1.40	                    CPU u-code Version:      	|
|   KBC BIOS Version  : 1.40                          A1 M206D109 (Dothan)     	|
|   VGA BIOS          : IntelVGA: 1235                A2 M206D210 (Dothan)     	|
|			ATI M26P: BR14478     	      B1 M206D617 (Dothan)      |
|			                              C0 M206D820 (Dothan)     	|
|                                                     B1 M8069545 (Celeron M)  	|
|   Flash Utility Ver.: 00.12						     	|
|   Flashchk Version  : 1.90                                                   	|
|   Counting BIOS.ROM, 559024 Bytes, 09/21/105 ... -> Check sum = C8E5  	|
|   Counting UMA.ROM,  524288 Bytes, 09/21/105 ... -> Check sum = 9500  	|
|   Counting M26P.ROM, 524288 Bytes, 09/21/105 ... -> Check sum = 9ABB  	|
+===============================================================================+
System BIOS:

	1. Enable the Spread Spectrum
	2. Change modem wake support from s4 to s3

EC BIOS:
 Fixed:
 	1.> Power button abnormal .



DOS version upgarde SOP:
+==============================================================================+
|    	               BIOS FLASH USAGE                                  |
+==============================================================================+
1. formal flash process
  a). Load DOS's TSR to high memory.
      * Confirm HIMEM.SYS is in your boot disk, you can find it in DOS.
      * Assume HIMEM.SYS reside in c:\,  add following statement in CONFIG.SYS:
        DEVICE=C:\HIMEM.SYS
        DOS=HIGH
  b). Copy all files to thumb or hard disk. Note that can't use floppy disk,
      as it's size is too small to execute following steps.
  c). Boot into DOS.
  d). Execute flash.bat, and wait for all process done. In this step, will
      produce all.rom that has flash capability. It is suitable for your
      platform's vga and lan chip.

2. Build all sku's rom
   Execute buildrom.bat in DOS or Windows, then it will create rom files of
   various SKU.

3. Using crisis
   a). Copy bflashit.bin and 512K bios rom to floppy disk.
   b). Plug in floppy disk to your system.
   c). Unplug AC
   d). Press Fn+Esc and don't release.
   e). Plug AC, then release Fn+Esc.
   f). Press power button and wait crisis to be finished.




Windows version upgarde SOP:
+==============================================================================+
|    	       BIOS WINDOWS FLASH USER'S GUIDE                           |
+==============================================================================+
1. Copy all files to thumb or hard disk. Note that can't use floppy disk,
   as it's size is too small to execute following steps.
2. The environment must be under windows mode, because the flash tool need to 
   run in windows system.
3. Execute the "flash.bat" to update BIOS.
4. When the flash status finished, that will show a "window to tell do you want
   to reboot your system?", please enter "YES". It will helping you to do reboot.
