+==============================================================================+
|    	               EDL00 BIOS FLASH USAGE                                  |
+==============================================================================+
1. formal flash process
  a). Load DOS's TSR to high memory.
      * Confirm HIMEM.SYS is in your boot disk, you can find it in DOS.
      * Assume HIMEM.SYS reside in c:\,  add following statement in CONFIG.SYS:
        DEVICE=C:\HIMEM.SYS
        DOS=HIGH
  b). Copy all files to thumb or hard disk. Note that can't use floppy disk,
      as it's size is too small to execute following steps.
  c). Boot into DOS.
  d). Execute flash.bat, and wait for all process done. In this step, will
      produce all.rom that has flash capability. It is suitable for your
      platform's vga and lan chip.

2. Build all sku's rom
   Execute buildrom.bat in DOS or Windows, then it will create rom files of
   various SKU.

3. Using crisis
   a). Run buildrom.bat to create the UMA.rom and M26P.rom files, then copy the matching platform ROM-file to a floppy disk and remane the uma.rom or m26p.rom( uma.rom for intel VGA laptop, m26p.rom for ATI VGA) to BIOS.rom
   and copy the bflashit.bin to the floppy disk.
   b). Plug in floppy disk to your system.
   c). Unplug AC
   d). Press Fn+Esc and don't release.
   e). Plug AC, then release Fn+Esc.
   f). Press power button and wait crisis to be finished.
