+============================================================================+
JDW50 Release Note
+============================================================================+
BIOS CORE Version ................  Phoenix TrustedCore TC3B
CPUs Supported    ................  Intel Yonah/Merom
Chipset           ................  Intel 943GML/945PM/GM (Calistoga)
Bridge            ................  ICH7m/ICH7m-DH
Video             ................  Intel 943GML/945GM/ATI M71M
Audio             ................  Realtek ALC268 Audio Codec
LAN               ................  Broadcom 5787MKMLG
1394 controller   ................  x
Memory Card	  ................  Ricoh R5C833
KBC               ................  ENE926
Clock Generator   ................  ICS9LPRS325
Super I/O         ................  x
BIOS ROM Part	  ................  PM25LV08 / MX25L800 / W25X80
################################################################################
#                                                                              #
#       The "*" mark indicates that file has been modified in this version.    #
#       The "+" mark indicates that file has been added for issue fix.         #
#       The "-" mark indicates that file has been removed for some reason.     #
#       The ">" mark indicates that file has been replace file of folder       #
#                                                                              #
################################################################################
+==============================================================================+
| MODEL NO. :  JDW50                               RELEASE DATE : 07/17/07     |
|------------------------------------------------------------------------------|
|   Major Version    : V1.50                        CPU u-code Version:        |
|   KBC BIOS Version : V1.50                                                   |
|   VGA BIOS         : ATI M71M	BR25236 				       |
|                    : Intel: V1471                                            |
|   M71M  VGA CLOCK   : XXX/XXX                                                |
|   Dos Flash Utility Ver    : V1.6.4.2                                        |
|   Windows Flash Utility Ver: V1.6.2.9                                        |
|   UMA Clock Generator       : 077h, 0EFh, 03Ch, 088h, 080h, 000h, 01Bh,      |
|                               011h, 014h, 056h, 0A7h, 005h, 0F0h, 0B7h       |
|   Discrete Clock Generator  : 07Eh, 0AFh, 03Ch, 080h, 080h, 000h, 01Bh,      |
|                               011h, 014h, 056h, 0A7h, 005h, 0F0h, 0B7h       |
|   Checksum (WPH)   :A895h            		                               |
+==============================================================================+
System Bios:
1.Fix in XP CRT event always issue.
2.Add new item and modify string for Acer request.
3.turn off the Atheros L0s of wireless lan card

EC Bios:
 Fixed:
 Known issue:
 Modified:
 	 1.> Modify adaptor over loading function to avoid this function
 	     enable under discrete system.

+==============================================================================+
| MODEL NO. :  JDW50                               RELEASE DATE : 06/29/07     |
|------------------------------------------------------------------------------|
|   Major Version    : V1.40                        CPU u-code Version:        |
|   KBC BIOS Version : V1.40                                                   |
|   VGA BIOS         : ATI M71M	BR25236 				       |
|                    : Intel: V1471                                            |
|   M71M  VGA CLOCK   : XXX/XXX                                                |
|   Dos Flash Utility Ver    : V1.6.4.2                                        |
|   Windows Flash Utility Ver: V1.6.2.9                                        |
|   Clock Generator  : 07Fh, 0FFh, 0FCh, 000h, 080h, 000h, 01Bh,	       |
|                      086h, 014h, 056h, 0B0h, 005h, 0B0h, 0B7h,               |
|   Checksum (WPH)   :AD4Ah            		                               |
|   Checksum (ROM)   :3687h                                                    |
+==============================================================================+
 
System Bios:
1.add a new Chicony camera B02Xh
2.change the hot plug TV setting of UMA VGA BIOS
3.solve the F2 hang in acer logo issue.

EC Bios:
 Modified:
	 1.> Update KB925/926 source code all v0.25 and 0.26.
	 2.> Modify DVR debounce Function.
	 3.> Modify CIR behavior for support button 1 works under DOS mode.
 	 4.> Modify Read Charing Voltage function to avoid SANYO battery
 	     will not be able to be charged when battery cycle count over
 	     100.
	 5.> Modify Wrong adapter function to support wrong adapter check when
	     system is off. 	      
+==============================================================================+
| MODEL NO. :  JDW50                               RELEASE DATE : 06/07/07     |
|------------------------------------------------------------------------------|
|   Major Version    : V1.32                        CPU u-code Version:        |
|   KBC BIOS Version : V1.32                                                   |
|   VGA BIOS         : ATI M71M	BR25236 				       |
|                    : Intel: V1471                                            |
|   M71M  VGA CLOCK   : XXX/XXX                                                |
|   Dos Flash Utility Ver    : V1.6.4.2                                        |
|   Windows Flash Utility Ver: V1.6.2.9                                        |
|   Clock Generator  : 07Fh, 0FFh, 0FCh, 000h, 080h, 000h, 01Bh,	       |
|                      086h, 014h, 056h, 0B0h, 005h, 0B0h, 0B7h,               |
|   Checksum (WPH)   : 9D1Fh          		                               |
|   Checksum (ROM)   : 265Ch                                                   |
+==============================================================================+
System Bios:

1.Set HDD mode from Enhance to AHCI mode.
2.Fix HDD can not find OS.

EC Bios:
No changed.

+==============================================================================+
| MODEL NO. :  JDW50                               RELEASE DATE : 06/04/07     |
|------------------------------------------------------------------------------|
|   Major Version    : V1.31                        CPU u-code Version:        |
|   KBC BIOS Version : V1.31                                                   |
|   VGA BIOS         : ATI M71M	BR25236 				       |
|                    : Intel: V1471                                            |
|   M71M  VGA CLOCK   : XXX/XXX                                                |
|   Dos Flash Utility Ver    : V1.6.4.2                                        |
|   Windows Flash Utility Ver: V1.6.2.9                                        |
|   Clock Generator  : 07Fh, 0FFh, 0FCh, 000h, 080h, 000h, 01Bh,	       |
|                      086h, 014h, 056h, 0B0h, 005h, 0B0h, 0B7h,               |
|   Checksum (WPH)   : D193h          		                               |
|   Checksum (ROM)   : 5AD0h                                                   |
+==============================================================================+
System Bios:
1.Set HDD mode from AHCI to Enhance mode.

EC Bios:
No changed.
+==============================================================================+
| MODEL NO. :  JDW50                               RELEASE DATE : 05/30/07     |
|------------------------------------------------------------------------------|
|   Major Version    : V1.30                        CPU u-code Version:        |
|   KBC BIOS Version : V1.30                                                   |
|   VGA BIOS         : ATI M71M	BR25236 				       |
|                    : Intel: V1471                                            |
|   M71M  VGA CLOCK   : XXX/XXX                                                |
|   Dos Flash Utility Ver    : V1.6.4.2                                        |
|   Windows Flash Utility Ver: V1.6.2.9                                        |
|   Clock Generator  : 07Fh, 0FFh, 0FCh, 000h, 080h, 000h, 01Bh,	       |
|                      086h, 014h, 056h, 0B0h, 005h, 0B0h, 0B7h,               |
|   Checksum (WPH)   : 5206h          		                               |
|   Checksum (ROM)   : DB43h                                                   |
+==============================================================================+
System Bios:
1.Reduce S4 resume time.

EC Bios:
 Notification:
         1.> Need flash EC's boot block? --> No
         2.> For SPI ROM only
 Fixed:
 Known issue:
 Modified:
	 1.> Enable "LLB resume from S3" function as default. It can be
	     disable by Cmd59 DatB3/B4 (enable/disable).
 Add function:

+==============================================================================+
| MODEL NO. :  JDW50                               RELEASE DATE : 05/30/07     |
|------------------------------------------------------------------------------|
|   Major Version    : V1.22                        CPU u-code Version:        |
|   KBC BIOS Version : V1.22                                                   |
|   VGA BIOS         : ATI M71M	BR25236 				       |
|                    : Intel: V1471                                            |
|   M71M  VGA CLOCK   : XXX/XXX                                                |
|   Dos Flash Utility Ver    : V1.6.4.2                                        |
|   Windows Flash Utility Ver: V1.6.2.9                                        |
|   Clock Generator  : 07Fh, 0FFh, 0FCh, 000h, 080h, 000h, 01Bh,	       |
|                      086h, 014h, 056h, 0B0h, 005h, 0B0h, 0B7h,               |
|   Checksum (WPH)   : 60DDh          		                               |
|   Checksum (ROM)   : EA3Bh                                                   |
+==============================================================================+
System Bios:
1.Add intel porting giude set XOR mode.

EC Bios:
Notification:
         1.> Need flash EC's boot block? --> No
         2.> For SPI ROM only
 Fixed:
 Known issue:
 Modified:
 	1.> Workaround : EC generates an event 20 seconds after system 
 	    in ACPI mode.
 Add function:
+==============================================================================+
| MODEL NO. :  JDW50                               RELEASE DATE : 05/24/07     |
|------------------------------------------------------------------------------|
|   Major Version    : V1.21                        CPU u-code Version:        |
|   KBC BIOS Version : V1.21                                                   |
|   VGA BIOS         : ATI M71M	BR25236 				       |
|                    : Intel: V1471                                            |
|   M71M  VGA CLOCK   : XXX/XXX                                                |
|   Dos Flash Utility Ver    : V1.6.4.2                                        |
|   Windows Flash Utility Ver: V1.6.2.9                                        |
|   Clock Generator  : 07Fh, 0FFh, 0FCh, 000h, 080h, 000h, 01Bh,	       |
|                      086h, 014h, 056h, 0B0h, 005h, 0B0h, 0B7h,               |
|   Checksum (WPH)   : F5CFh          		                               |
|   Checksum (ROM)   : 7F2Dh                                                   |
+==============================================================================+
System Bios:
1.Update ATI vga bios to BR25236 version.
2.Fix wireless disable S3 resume fail.

EC Bios:
No changed.

+==============================================================================+
| MODEL NO. :  JDW50                               RELEASE DATE : 05/18/07     |
|------------------------------------------------------------------------------|
|   Major Version    : V1.20                        CPU u-code Version:        |
|   KBC BIOS Version : V1.20                                                   |
|   VGA BIOS         : ATI M71M	BR25042 				       |
|                    : Intel: V1471                                            |
|   M71M  VGA CLOCK   : XXX/XXX                                                |
|   Dos Flash Utility Ver    : V1.6.4.2                                        |
|   Windows Flash Utility Ver: V1.6.2.9                                        |
|   Clock Generator  : 07Fh, 0FFh, 0FCh, 000h, 080h, 000h, 01Bh,	       |
|                      086h, 014h, 056h, 0B0h, 005h, 0B0h, 0B7h,               |
|   Checksum (WPH)   : C1E7h          		                               |
|   Checksum (ROM)   : 4B45h                                                   |
+==============================================================================+
System Bios:
1.Update T5500 cpu micro code, cpu id 6f2h.
2.Make sure only SATA port0 enable.

EC BIOS:
 Fixed:
 Known issue:
 Modified:
 	1.> Workaround : EC generates an event 20 seconds after system 
 	    in ACPI mode.
 Add function:

+==============================================================================+
| MODEL NO. :  JDW50                               RELEASE DATE : 05/17/07     |
|------------------------------------------------------------------------------|
|   Major Version    : V1.10                        CPU u-code Version:        |
|   KBC BIOS Version : V1.10                                                   |
|   VGA BIOS         : ATI M71M	BR25042 				       |
|                    : Intel: V1471                                            |
|   M71M  VGA CLOCK   : XXX/XXX                                                |
|   Dos Flash Utility Ver    : V1.6.4.2                                        |
|   Windows Flash Utility Ver: V1.6.2.9                                        |
|   Clock Generator  : 07Fh, 0FFh, 0FCh, 000h, 080h, 000h, 01Bh,	       |
|                      086h, 014h, 056h, 0B0h, 005h, 0B0h, 0B7h,               |
|   Checksum (WPH)   : ABAFh          		                               |
|   Checksum (ROM)   : 350Dh                                                   |
+==============================================================================+
System Bios:
Update bios version to 1.10.

EC Bios:
 Fixed:
 Known issue:
 Modified:
 	 1.> Modify Fan output behavior to avoid there is still fan out
 	     when there is no require to turn on fan.
 	 2.> Update Brightness Table V03.

+==============================================================================+
| MODEL NO. :  JDW50                               RELEASE DATE : 05/15/07     |
|------------------------------------------------------------------------------|
|   Major Version    : V1.00                        CPU u-code Version:        |
|   KBC BIOS Version : V1.00                                                   |
|   VGA BIOS         : ATI M71M	BR25042 				       |
|                    : Intel: V1471                                            |
|   M71M  VGA CLOCK   : XXX/XXX                                                |
|   Dos Flash Utility Ver    : V1.6.4.2                                        |
|   Windows Flash Utility Ver: V1.6.2.9                                        |
|   Clock Generator  : 07Fh, 0FFh, 0FCh, 000h, 080h, 000h, 01Bh,	       |
|                      086h, 014h, 056h, 0B0h, 005h, 0B0h, 0B7h,               |
|   Checksum (WPH)   : 94F6h          		                               |
|   Checksum (ROM)   : 1E54h                                                   |
+==============================================================================+
Modify bios version and EC version.
 

+==============================================================================+
| MODEL NO. :  JDW50                               RELEASE DATE : 05/15/07     |
|------------------------------------------------------------------------------|
|   Major Version    : V0.13                        CPU u-code Version:        |
|   KBC BIOS Version : V0.13                                                   |
|   VGA BIOS         : ATI M71M	BR25042 				       |
|                    : Intel: V1471                                            |
|   M71M  VGA CLOCK   : XXX/XXX                                                |
|   Flash Utility Ver: V1.6.0.1                                                |
|   Clock Generator  : 07Fh, 0FFh, 0FCh, 000h, 080h, 000h, 01Bh,	       |
|                      086h, 014h, 056h, 0B0h, 005h, 0B0h, 0B7h,               |
|   Checksum (WPH)   : B57Bh          		                               |
|   Checksum (ROM)   : 3ED9h                                                   |
+==============================================================================+
System Bios:
1.Fixed Winflash cause system can not power on. 
2.Fixed when first flash new bios, the boot priority incorrect. 

 Fixed:
 Known issue:
 Modified:
	 1.> Update Thermal Fan table to support two different
	     Fan table under Discrete system with TJ85 CPU.
	     Thermal Fan table V05.
 Add function:

+==============================================================================+
| MODEL NO. :  JDW50                               RELEASE DATE : 05/14/07     |
|------------------------------------------------------------------------------|
|   Major Version    : V0.12                        CPU u-code Version:        |
|   KBC BIOS Version : V0.12                                                   |
|   VGA BIOS         : ATI M71M	BR25042 				       |
|                    : Intel: V1471                                            |
|   M71M  VGA CLOCK   : XXX/XXX                                                |
|   Flash Utility Ver: V1.6.0.1                                                |
|   Clock Generator  : 07Fh, 0FFh, 0FCh, 000h, 080h, 000h, 01Bh,	       |
|                      086h, 014h, 056h, 0B0h, 005h, 0B0h, 0B7h,               |
|   Checksum (WPH)   : 081Ah          		                               |
|   Checksum (ROM)   : F8A9h                                                   |
+==============================================================================+
System Bios:
1.Fix bios hang up at 1Ch.
2.Increase S4 time
3.Pre-load E recovery can not boot from CD rom.
4.Modify brightness correctly.
5.Change S4 resume port 80h code from 0EEh to 036h
6.Modify boot sequence correctly.
7.Add support EDID table report to EC.
8.Add CRT event for WMI.

EC Bios:
 Fixed:
 Known issue:
 Modified:
 	1.> Modify SPI ROM function process to avoid TP lock after
 	    resume S4/S5.
 	2.> Update KB925/926 source code all v0.24.	
 Add function:
 	1.> Add new shutdown ID for DTS and VGA over temperature.
 	    shutdown ID : 0x11 -> DTS , 0x12 -> VGA.
	2.> Add CIR testing function under DOS mode.
	    Note : only support for "key 1".	
	
+==============================================================================+
| MODEL NO. :  JDW50                               RELEASE DATE : 05/10/07     |
|------------------------------------------------------------------------------|
|   Major Version    : V0.11                        CPU u-code Version:        |
|   KBC BIOS Version : V0.11                                                   |
|   VGA BIOS         : ATI M71M	BR25042 				       |
|                    : Intel: V1471                                            |
|   M71M  VGA CLOCK   : XXX/XXX                                                |
|   Flash Utility Ver: V1.6.0.1                                                |
|   Clock Generator  : 07Fh, 0FFh, 0FCh, 000h, 080h, 000h, 01Bh,	       |
|                      086h, 014h, 056h, 0B0h, 005h, 0B0h, 0B7h,               |
|   Checksum (WPH)   : BE3Bh          		                               |
|   Checksum (ROM)   : AE3Dh                                                   |
+==============================================================================+
System Bios:
1.Change S4 resume port 80h code from 36h to 0EEh
2.fixed PCI-E card cold/warm boot fail.
3.Add brightness event for WMI in Windows Vista.
4.Report S3/S4 battery capacity function and others for WMI.
5.Report Monitor on/off function for WMI.
6.Modify card reader interrupt by ENE FAE recommend .
7.Report TPM/ODD type for WMI.
8.Remove the EC 575Fh garbage code for the long run issue.
9.Report PCI infomation to WMI.

EC Bios:
 Fixed:
 Known issue:
 Modified:
 	 1.> Modified Power Button to meet Common code V023.
 	 2.> Modified Fan control function to identify fan table for
 	     UMA and Discrete system. 
 	 3.> Check System LED status during "turn off system"
 	     to aviod suspend led on after press power button for
 	     resuming from S4. 	    	 
 Add function:
 	 4.> Add Panel backlight on/off event function.

+==============================================================================+
| MODEL NO. :  JDW50                               RELEASE DATE : 05/03/07     |
|------------------------------------------------------------------------------|
|   Major Version    : V0.10                        CPU u-code Version:        |
|   KBC BIOS Version : V0.10                                                   |
|   VGA BIOS         : ATI M71M	BR25042 				       |
|                    : Intel: V1471                                            |
|   M71M  VGA CLOCK   : XXX/XXX                                                |
|   Flash Utility Ver: V1.6.0.1                                                |
|   Clock Generator  : 07Fh, 0FFh, 0FCh, 000h, 080h, 000h, 01Bh,	       |
|                      086h, 014h, 056h, 0B0h, 005h, 0B0h, 0B7h,               |
|   Checksum (WPH)   : 3326h          		                               |
|   Checksum (ROM)   : 227Ah                                                   |
+==============================================================================+
System BIOS:
1.Modify the CAR reader PCIIRQ setting
2.Add Lan cable plug in/out WMI function.
3.Modify the Graphics Controller setting
4.Remove the advance in F2 bios setup.   
5.Update new ATI vga bios.1. Add Hyper Memory support 2. Add callback function expansion support 3. Change power play setting for M71 UVD
6.Modify clockgen to seprate UMA/Discrate platform.
7.Modify new value of touch pad in eeprom location.
8.Modify the SD,MS,XD setting to match the HW changed

EC BIOS:
 Fixed:
 	1.> Fixed issue for system entering S4 -> remove AC -> 
	    AC LED still on.
 Modified:
	 1.> Modified battery manufacturer name behavior. 
	 2.> Extend time to turn on the light of panel from
	     50ms to 650ms.
	 3.> Update DTS and VGA namespace address.
	 4.> Update CPU over temperature points.
	 5.> Modified to support power button 4 seconds shutdown and
	     store port 80 error code to SPI ROM(EEPROM).
 	 6.> Update KB925/926 source code all v0.22 and v0.23.	
 	 
+==============================================================================+
| MODEL NO. :  JDW50                               RELEASE DATE : 04/23/07     |
|------------------------------------------------------------------------------|
|   Major Version    : V0.09                        CPU u-code Version:        |
|   KBC BIOS Version : V0.09                                                   |
|   VGA BIOS         : ATI M71M	24761					       |
|                    : Intel: V1471                                            |
|   M71M  VGA CLOCK   : XXX/XXX                                                |
|   Flash Utility Ver: V1.6.0.1                                                |
|   Clock Generator  : 07Fh, 0FFh, 0FCh, 000h, 080h, 000h, 01Bh,	       |
|                      086h, 014h, 056h, 0B0h, 005h, 0B0h, 0B7h,               |
|   Checksum (WPH)   : CDF5h          		                               |
|   Checksum (ROM)   : BD49h                                                   |
+==============================================================================+
System BIOS:
1.change the ATI M71M L0s,L1 setting. 
2.change the SD,MS,XD setting to match the HW changed
3.Change the Intel VGA BIOS from 1436 to 1471
4.Sync bios asl code EC namespace from ENE-910 to ENE-926.  
5.Set PCIE bridge 3/4 offset 50h bit 1 for Intel power managment.  
6.Fixed press Ctrl-Alt-Del,the backlight flash some color. 

EC BIOS:
 Modified:
	1.> Modified ADPI voltage and throttling time to follow battery 
	    parameter.
	2.> Modified Brightness control hotkey.
	3.> Modified TurnOffKBC behavior for wrong adapter function under 
	    system off mode.
	4.> Update Fan table to follow thermal control table v03.
	    System only refers to T-Diode.	    
	5.> Modified Fn+S->A function to support store port80 information
	    in system off mode when Fn+S->A is pressed.
	6.> Update KB925/926 source code all v0.21.	    
 Add function:
 	1.> Enable "reading VGA thermal temperature" function.
 	2.> Add Fast turn on system in DC mode function. 
+==============================================================================+
| MODEL NO. :  JDW50                               RELEASE DATE : 04/18/07     |
|------------------------------------------------------------------------------|
|   Major Version    : V0.08                        CPU u-code Version:        |
|   KBC BIOS Version : V0.08                                                   |
|   VGA BIOS         : ATI M71M	XXXXXXX					       |
|                    : Intel: V1436                                            |
|   M71M  VGA CLOCK   : XXX/XXX                                                |
|   Flash Utility Ver: V1.6.0.1                                                |
|   Clock Generator  : 07Fh, 0FFh, 0FCh, 000h, 080h, 000h, 01Bh,	       |
|                      086h, 014h, 056h, 0B0h, 005h, 0B0h, 0B7h,               |
|   Checksum (WPH)   : 8536h          		                               |
|   Checksum (ROM)   : 75E3h                                                   |
+==============================================================================+
System BIOS:
1.chagne the setting of Clock generator for Power saving
2.add 4965 wireless Lan care device ID, modify the workarround
3.Rename boot priority hdd name from IDE2 to IDE0. 
4.fix the issue of garbage appear before acer logo in S4-resume and coolboot.
5.fix while doing winflash the window showing "no respound" issue
6.change the EC-command of 3G detecting to avoid over-write the EC identify 65W/90W command. 
7.Fixed boot priority load default incorrect.
8.Fixed PCIE some new card cannot be recognized. 

EC BIOS:
 Modified:
	1.> Modified ADPI voltage and throttling time to follow battery 
	    parameter.
	2.> Modified Brightness control hotkey.
	3.> Modified TurnOffKBC behavior for wrong adapter function under 
	    system off mode.
	4.> Update Fan table to follow thermal control table v03.
	    System only refers to T-Diode.	    
	5.> Modified Fn+S->A function to support store port80 information
	    in system off mode when Fn+S->A is pressed.
	6.> Update KB925/926 source code all v0.21.	    
 Add function:
 	1.> Enable "reading VGA thermal temperature" function.
 	2.> Add Fast turn on system in DC mode function. 
+==============================================================================+
| MODEL NO. :  JDW50                               RELEASE DATE : 04/11/07     |
|------------------------------------------------------------------------------|
|   Major Version    : V0.07                        CPU u-code Version:        |
|   KBC BIOS Version : V0.07                                                   |
|   VGA BIOS         : ATI M71M	BR24674					       |
|                    : Intel: V1436                                            |
|   M71M  VGA CLOCK   : XXX/XXX                                                |
|   Flash Utility Ver: V1.6.0.1                                                |
|   Clock Generator  : 07Fh, 0FFh, 0FCh, 000h, 080h, 000h, 01Bh,	       |
|                      086h, 014h, 056h, 0B0h, 005h, 0B0h, 0B7h,               |
|   Checksum (WPH)   : 0D06h          		                               |
|   Checksum (ROM)   : FD95h                                                   |
+==============================================================================+
System BIOS:
1. auto to clear some CMOS value after flash BIOS and change the EC command.  
2. Compatible to smart Media XD picture compliance test
3. Remove boot priority 8 item in F2 bios setup.   
4. Remove HDD1 item of information in F2 bios setup.   
5. Update new ATI vga bios.  
6. Remove SATA mode/AHCI item in F2 bios setup.   
7. change the brightness from 16 level to 10 level for new spec defination.
8. Fixed S4 resume failure with usb device. 
9. update kernel code for incorporated ASL fix for "missing" drives after HDD timeout in OS.
10.The internal keyboard lost function,when user input 3 times incorrect supervisor password

EC BIOS:
 Fixed:
 	1.> Modify TP enable/disable behavior to fix disable ALPS TP 
 	    and enter S3 then resume from S3, TP cannot be enabled issue.
 Modified:
 	1.> Modify LLB SCI event.
 	2.> Modify LLB resume from S3 behavior.
	3.> Update KB925/926 source code v0.21 	

+==============================================================================+
| MODEL NO. :  JDW50                               RELEASE DATE : 04/03/07     |
|------------------------------------------------------------------------------|
|   Major Version    : V0.06                        CPU u-code Version:        |
|   KBC BIOS Version : V0.06                                                   |
|   VGA BIOS         : ATI M71M	BR24674					       |
|                    : Intel: V1436                                            |
|   M71M  VGA CLOCK   : XXX/XXX                                                |
|   Flash Utility Ver: V1.6.0.1                                                |
|   Clock Generator  : 07Fh, 0FFh, 0FCh, 000h, 080h, 000h, 01Bh,	       |
|                      086h, 014h, 056h, 0B0h, 005h, 0B0h, 0B7h,               |
|   Checksum (WPH)   : CDEEh          		                               |
|   Checksum (ROM)   : B8D7h                                                   |
+==============================================================================+
System BIOS:
1.CHANGE M71M VGA BIOS for taking off the VBIOS Message(cannot flash to A build Qimoda model )
2.Fixed Card reader Register for sub system ID
3.Modify new value of touch pad in eeprom location.  
4.Change the boot SEQUENCE to meet the acer Spec.  
5.modify the code for 1. accelerate the VGA version showing. 2. take off the code writting EEPROM in set up menu.                
6.fix after pressing the F12, then message error issue.  
7.Modify settings menu "Information" page has a scroll bar in right site issue.
 
EC BIOS:
 	1.> Update KB925/926 source code v0.19
 	2.> Update KB925/926 source code v0.20
 	3.> Fix Synaptics TP crazy caused by moving TP during S3,S4 resume.
 	
+==============================================================================+
| MODEL NO. :  JDW50                               RELEASE DATE : 03/27/07     |
|------------------------------------------------------------------------------|
|   Major Version    : V0.05                        CPU u-code Version:        |
|   KBC BIOS Version : V0.05                                                   |
|   VGA BIOS         : ATI M71M	BR24491					       |
|                    : Intel: V1436                                            |
|   M71M  VGA CLOCK   : XXX/XXX                                                |
|   Flash Utility Ver: V1.6.0.1                                                |
|   Clock Generator  : 07Fh, 0FFh, 0FCh, 000h, 080h, 000h, 01Bh,	       |
|                      086h, 014h, 056h, 0B0h, 005h, 0B0h, 0B7h,               |
|   Checksum (WPH)   : 3656h          		                               |
|   Checksum (ROM)   : 211Eh                                                   |
+==============================================================================+
System BIOS:
JDW50-037 Fix the issue of SLP 2.0.   
JDW50-036 Add PMC PM25LV080 & Winbond W25X80 Rom part
JDW50-035 fix the F2 message and Resume from S4 F2 logo issue 
JDW50-034 Modify no HDD0/HDD1 show 'None' string in F2 setup menu.
JDW50-033 Modify HDD0/HDD1/ATAPI string and power on display in F2 bios setup menu for Acer spec.
JDW50-032 Modify new touch pad ID and eeprom location from EFh to EEh.
JDW50-031 Add code for EC identify 65W/90W platform
JDW50-030 CHANGE M71M VGA BIOS for new MEM_ID as below table to replace B channel 64bit to A0B0 channel 64bit for performance improve
JDW50-029 Support SPI flash part like as external eeprom.    
JDW50-022 modify the automaticly detecting VGA version code for Intel, ATI and nVidia platforms

EC BIOS:
 	1.> Update Thermal Shutdown temperature to 105.
	2.> Modify FastCharge current for cycle count > 100 and cycle 
	    count <= 100.
	3.> Update Fan Table for UMA and Discrete system.
	4.> Add Cmd and Dat for 15", 17", UMA and Discrete system.
 	    17"      :   C:0x45 D:0xB7 Others   :   C:0x45 D:0xB8
	    Discrete :   C:0x45 D:0xB9 Others   :   C:0x45 D:0xBA 
+==============================================================================+
| MODEL NO. :  JDW50                               RELEASE DATE : 03/20/07     |
|------------------------------------------------------------------------------|
|   Major Version    : V0.04                        CPU u-code Version:        |
|   KBC BIOS Version : V0.04                                                   |
|   VGA BIOS         : ATI M71M						       |
|                    : Intel: V1436                                            |
|   M71M  VGA CLOCK   : XXX/XXX                                                |
|   Flash Utility Ver: V1.6.0.1                                                |
|   Clock Generator  : 07Fh, 0FFh, 0FCh, 000h, 080h, 000h, 01Bh,	       |
|                      086h, 014h, 056h, 0B0h, 005h, 0B0h, 0B7h,               |
|   Checksum (WPH)   : 1E3EH          		                               |
|   Checksum (ROM)   : 763AH                                                   |
+==============================================================================+
JDW50-028 Fixed install Windows Vista bluescreen in 943GML.
JDW50-027 Change Platform ID from "Grapevine" to "Acadia" for DMI type 2.
JDW50-026 Fixed super/user password cmos location.
JDW50-025 Load AHCI mode to default.
JDW50-024 Fix complier acpi table error.
JDW50-023 Update T2060 cpu micro code patch id from 59h to 5bh.
####################### Not Add this    JDW50-022 modify the automaticly detecting VGA version code for Intel, ATI and nVidia platforms
JDW50-021 CHANGE M71M VGA BIOS for TV out no function issue
JDW50-020 Take off the function automaticly turn off Spdif function in UMA mode
JDW50-019 MODIFY AZALIA TABLE for realtek ALC269
JDW50-018 Change hdd from combine mode to ehance mode.
JDW50-017 fix ATI VGA memory information incorrect issue in setup menu
JDW50-016 Add ACPI 2.0 FACP table. 
JDW50-015 Remove report FACP table Dock cap flag. 
JDW50-014 Change oem table id from "Grape" to "Acadia".

EC BIOS:
 	1.> Remove "resume from S3 after lid is not pressed" function.
 	2.> Update KB925/926 source code v0.17
	3.> Update Fan table and disable Fan full on.

+==============================================================================+
| MODEL NO. :  JDW50                               RELEASE DATE : 03/12/07     |
|------------------------------------------------------------------------------|
|   Major Version    : V0.03                        CPU u-code Version:      |
|   KBC BIOS Version : V0.03                                                 |
|   VGA BIOS         : ATI M71M						       |
|                    : Intel: V1436                                            |
|   M71M  VGA CLOCK   : XXX/XXX                                                |
|   Flash Utility Ver: V1.6.0.1                                                |
|   Clock Generator  : 07Fh, 0FFh, 0FCh, 000h, 080h, 000h, 01Bh,	       |
|                      086h, 014h, 056h, 0B0h, 005h, 0B0h, 0B7h,               |
|   Checksum (WPH)   : 6551H          		                               |
|   Checksum (ROM)   : BDA4H                                                   |
+==============================================================================+
System BIOS:
JDW50-013 [Mi000] reserve the IO base 68h and 6Ch FOR EC to run launch manager			
JDW50-012 [Mi000] Modify the Verb table for HDA ALC268 and modem			
JDW50-011 [Mi000] program card reader for ENE MR510			
JDW50-010 [MK000] implement the S4 wake-up for EC to enable the RCT power     				       
JDW50-009 [MK000] fix Pressing the F2 hang issue in ATI platform   
JDW50-008 [MK000] fix the ATI not support the VESA specification 4F09 issue, showing ACER logo incorrect color in POST

EC BIOS:
 	1.> Update on timer between SUSP power and VR_ON from 50ms to 100ms.
 	
+==============================================================================+
| MODEL NO. :  JDW50                               RELEASE DATE : 03/07/07     |
|------------------------------------------------------------------------------|
|   Major Version    : V0.02                        CPU u-code Version:      |
|   KBC BIOS Version : V0.02                                                 |
|   VGA BIOS         : ATI M71M						       |
|                    : Intel: V1436                                            |
|   M71M  VGA CLOCK   : XXX/XXX                                                |
|   Flash Utility Ver: V1.6.0.1                                                |
|   Clock Generator  : 07Fh, 0FFh, 0FCh, 000h, 080h, 000h, 01Bh,	       |
|                      086h, 014h, 056h, 0B0h, 005h, 0B0h, 0B7h,               |
|   Checksum (WPH)   : 02FAH          		                               |
|   Checksum (ROM)   : 5B2FH                                                   |
+==============================================================================+
System BIOS:
JDW50-007 [MK000] change the Flash part to support SPI 
JDW50-006 [MK000] remove 1394 code
JDW50-005 [MK000] remove Super IO code
JDW50-004 [MK000] modify the sub system ID
JDW50-003 [MK000] fix after install O.S. blue screen
JDW50-002 [MK000] fix code hang in 80 port showing 98h
JDW50-001 [MK000] Change the Intel VGA BIOS from 1377 to 1436
EC BIOS:
 	1.> Update KB925/926 source code v0.16
 	2.> Remove DPST function.
 	3.> Modify EX Keyboard Matrix.
	4.> Support Lid function to support "Resume from S3 after lid switch 
	    is not pressed."
+==============================================================================+
	Base on TC1 Source HBL50 3.50 code