[Fix history]

v1.07- 
<SYS BIOS>
01. Fix garbage screen when burn-in test.
02. SOLVE POST HANG 52
03. Update the NVMM to patch garbage screen in some discrete VGA.
04. Switch Display to LCD when Boot to Windows OS
05. init oemCmosCCDType to zero during every post

<EC BIOS>
 Modified:
	1.> Modify WDT wake up when system hang after 4 sec on EC into
		idle mode from S3 resume.

v1.06-

<SYS BIOS>
1. Fix Auto Into S3/S4 Time Out Screen Garbage Issue
2. Fix BlueTooth Lose after S4 Resume
3. Update NVMM.LIB to V4.072.41 (Jemmy 07/17)
4. Fixed no display but system alive issue after S3 resume.
5. AMD CPU Errata #168 in AGESA 2.08.09

<EC BIOS>
 Modified:
	1.> Modify can power button shutdown when system
	    hang on EC into idle mode from S3 resume.

v1.05-

<SYS BIOS>
1. Add the Ricoh controller pci register save/restore table
2. Notify Power Button only S4 Resume
3. Add code to reset powered down IDE early before NVMM to fix IDE detection
   on S4/S5 resume.
4. Clear MCP_TRIM_CFG_21_SATA_xx_RBC_CLAMP_STOP on shutdown and reset/resume.
5. Set SMU Controller's IRQ Independent for Burn In Black Screen Issue.
   (Set to IRQ17)
6. Patch the SATA HDD lost issue during S4 long run test
7. Debug the system can't resume back from S3 when add fix the SATA HDD lost
8. Add EN25F80 Rom part
9. Removed Useless Standard KBC Command for Reduce S3 Resume Time.
10. Modify the Way of System Flag Clear Command to EC Index IO
11. The IRQ Routing Table Optimization
12. Modify enable A20 method from EC CMD to Port92
13. remove kb test some code
14. Update NVMM.LIB to V4.072.41 to fix S4 resume hang at 64h (No display with
    back light, a cursor flash) and base on the version to do below modification
        a. Remove TMDS WAR (Reduce S3 resume time)
        b. Remove NB8X WAR (Stress test hang at 4Dh)
        c. Remove PCIE WAR (Reduce S3 resume time)

<EC BIOS>
 Modified:
	1.> Modify EC into idle mode when S3 resume.
	2.> Modify CIR wake up event.

[SOP]

<BIOS V1.07>
To flash BIOS in DOS mode, please unzip IC50107.ZIP and execute the IC50107.BAT to flash BIOS.
To flash BIOS in Windows mode, please unzip IC50107.ZIP and execute the flash32.exe to flash BIOS.
To read the Release Note, please open the Release.TXT

<VBIOS>

NB8P -SE  VBIOS: v60.86.51.00.33
NB8M-SE  VBIOS: v60.86.51.00.21 (no change)
MCP67MV VBIOS: v5.67.32.14.08 (default version)
 
<NB8P-SE VBIOS v60.86.51.00.33>
To flash VBIOS in DOS mode, please unzip 510033.ZIP and execute the f.BAT to flash NB8P-SE VBIOS in DOS mode.
