+============================================================================+
			JAL90 Release Note
+============================================================================+
BIOS CORE Version ................  Insyde EFI 2.0
CPUs Supported    ................  Intel Penryn 1067/800 MHz
Chipset           ................  Intel Cantiga
Bridge            ................  Intel ICH9M
Video             ................  UMA / ATI / nVidia
LCD Size          ................  14 TFT WXGA
Memory            ................  DDR2 667/800 MHz
HDD               ................  SATA
ODD               ................  SATA
PCMCIA            ................  N/A
Card Reader       ................  JBM385 (5in1)
1394 controller   ................  N/A
Audio             ................  HD Audio Realtek ALC888
LAN               ................  Realtek RTL8111C-GR
KBC               ................  ENE 926
Clock Generator   ................  ICS9LPRS387
Super I/O         ................  N/A
BIOS ROM Part	  ................  MX25LV008BB(SPI_FLASH:1MB)
Finger print	  ................  Authentec AES1610
+==============================================================================+
|   MODEL NO. :  JAL90                                RELEASE DATE : 05/08/09  |
|------------------------------------------------------------------------------|
|   Major Version      : V1.00                                                 |
|   KBC BIOS Version   : V1.00                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : 1625                                                  |
|   Kernel Version     : 2034                                                  |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : C Build                                               |
|   Clock Generator(discrete): 01h,85h,E8h,FDh,CFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Clock Generator(UMA) :     01h,85h,E8h,F5h,FFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Checksum (FD)      :    5750h                                              |
+==============================================================================+
BIOS:
   1). Release for Golden.

EC:
   None

+==============================================================================+
|   MODEL NO. :  JAL90                                RELEASE DATE : 05/01/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.23                                                 |
|   KBC BIOS Version   : V0.23                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : 1625                                                  |
|   Kernel Version     : 2034                                                  |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : C Build                                               |
|   Clock Generator(discrete): 01h,85h,E8h,FDh,CFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Clock Generator(UMA) :     01h,85h,E8h,F5h,FFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Checksum (FD)      :    440Ah                                              |
+==============================================================================+
BIOS:
    1) Can not Find 1394 express card when s3 resume.
    2) Enable Intel/Broadcom WLAN L0s.
    3) Fix S3 resume can't unlock HDPSWD after system restart.
    4) Fix B2 step chipset can't install RTM6000.
    5) Fix S4 resume time fail under Windows Xp.
    
EC:
    1) Modify DVI signal set high delay 300ms and set low delay 1sec.
    2) Modify enable EC_I2C interrupt after write Cypress sensitive.

+==============================================================================+
|   MODEL NO. :  JAL90                                RELEASE DATE : 04/25/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.22                                                 |
|   KBC BIOS Version   : V0.22                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : 1625                                                  |
|   Kernel Version     : 2034                                                  |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : C Build                                               |
|   Clock Generator(discrete): 01h,85h,E8h,FDh,CFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Clock Generator(UMA) :     01h,85h,E8h,F5h,FFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Checksum (FD)      :    1A9Ah                                              |
+==============================================================================+
BIOS:
    1) Implement DOS throttle.
    2) S3 resume hang when DTM testing.
    3) Implement Japan keyboard support.
    4) Fixed hang on windows bar.
    5) Set audio mute when EC enter idle, for fix winflash makes abnormal sound.
    6) Disable setupmeun Advance and power funtion
    7) Update PXE rom to 2.15
    8) Update UMA VBIOS 1625.

EC:
    1) Modify BT/WL keep status function follow new BIOS SPEC.

+==============================================================================+
|   MODEL NO. :  JAL90                                RELEASE DATE : 04/17/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.21                                                 |
|   KBC BIOS Version   : V0.21                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : 1618                                                  |
|   Kernel Version     : 2034                                                  |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : C Build                                               |
|   Clock Generator(discrete): 01h,85h,E8h,FDh,CFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Clock Generator(UMA) :     01h,85h,E8h,F5h,FFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Checksum (FD)      :    C6DDh                                              |
+==============================================================================+
BIOS:
    1) Disable PBA when enter SCU for meet spec.
    2) Fixed Windows Xp can't recognize battery. 
    3) Windows Xp Hibernate can't recognize battery from S3.
    4) Implement Battery Device name.
    5) Update Microcode 1067A.
    6) Disable Pci express port 1 ASPM(New Card) and Disable Pci Express Port 2 L0s.(WLAN) 
    7) Fix press F2 can't into scu after display "acer" Logo
    8) Fixed if enable EHCI wake up function, blue tooth device will lost after resume from s3/s4.
    9) Solve memory size information error over 3G on SMBIOS.
   10) Update some MRC 0.85 for Dynamic FSB stop at POST 0x95.

EC:
    1) Modify fan control by T-diode on DOS mode and DVT-machine.
    2) Modify power sequence for S3 shutdown issue.
    3) Add workaround for BT device lost when suspend resume.


+==============================================================================+
|   MODEL NO. :  JAL90                                RELEASE DATE : 04/10/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.20                                                 |
|   KBC BIOS Version   : V0.20                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : 1618                                                  |
|   Kernel Version     : 2033                                                  |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : C Build                                               |
|   Clock Generator(discrete): 01h,85h,E8h,FDh,CFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Clock Generator(UMA) :     01h,85h,E8h,F5h,FFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Checksum (FD)      :    A59Ch                                              |
+==============================================================================+
BIOS:
    1) Fix hang on SMT F/T when switch boot partition.
    2) Disable some Japanese keys in DOS mode.
    3) Fix wait long time to power on system when press power button.
    4) Fix USB CD-ROM device can't correctly show on SCU and Boot Menu bug.
    5) Update UMA VBIOS 1618.

EC:
    1) Modify EC Beep frequency to 500 MHz.
    2) Modify fan control by T-diode if DTS is zero.

+==============================================================================+
|   MODEL NO. :  JAL90                                RELEASE DATE : 04/02/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.19                                                 |
|   KBC BIOS Version   : V0.19                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : 1604                                                  |
|   Kernel Version     : 2032                                                  |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : C Build                                               |
|   Clock Generator(discrete): 01h,85h,E8h,FDh,CFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Clock Generator(UMA) :     01h,85h,E8h,F5h,FFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Checksum (FD)      :    7396h                                              |
+==============================================================================+
BIOS:
    1) Improve Power consumption.
    2) Implement DTS function.
    3) Fix system no run garbage code at post time with Robson card,if shutdown system by press power button 4sec(for JAL90 & JALA0)
    4) Implement battery serial number.
    5) Implement report s3 and s4 power consumption on WMI.
    6) Update HDMI switch strength for EMI solution.
    7) Reduce POST time
    8) Change HDPSW Status to "Froze" and disable "Set HD Password" function after HDD Frozen.
    9) Solve Enter Setup Asset Tag shows abnormal when write Asset Tag.
   10) Disable EHCI wake function and remove workaround.
   11) Password must be reserved when users enter the flash command.
   12) Add get fingerprint state of Acer Feature. 
   13) Fix Characters typing for password meet SPEC.
   
EC:
    1) Modify LCD power sequence for DPST function.
    2) Modify workaround for hang on Windows bar to 50 sec.
    3) Modify fan control table follow"JAL90_JALA0_C_Stage_Thermal Control Table_2008_0328_v7.xls".
+==============================================================================+
|   MODEL NO. :  JAL90                                RELEASE DATE : 03/26/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.18                                                 |
|   KBC BIOS Version   : V0.18                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : 1604                                                  |
|   Kernel Version     : 2031                                                  |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : C Build                                               |
|   Clock Generator(discrete): 01h,85h,E8h,FDh,CFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Clock Generator(UMA) :     01h,85h,E8h,F5h,FFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Checksum (FD)      : 9AA3h                                                 |
+==============================================================================+
BIOS:
    1) Fix new card hot plug some time occur blue screen 0xD1 issue.
    2) Fix Pci Express SVID.
    3) Disable Deep C4 and C6 if CPUID is 10674.
    4) Fix UMA platform can't adjust backlight.
    5) Fix UMA perfermance can't meet spec.
    6) Remove string limitation for Asset Tag.
    
EC:
    1) Add DVI signal control.
    2) Add read battery Manufacture Date.
    3) Add workaround for hang on Windows bar.    
+==============================================================================+
|   MODEL NO. :  JAL90                                RELEASE DATE : 03/24/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.17                                                 |
|   KBC BIOS Version   : V0.17                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : 1604                                                  |
|   Kernel Version     : 2031                                                  |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : C Build                                               |
|   Clock Generator(discrete): 01h,85h,E8h,FDh,CFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Clock Generator(UMA) :     01h,85h,E8h,F5h,FFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Checksum (FD)      : DE6Ah                                                 |
+==============================================================================+
BIOS:
  1) Fix HDD password will be clear after change HDD password unsuccessfully.(BCIC308)
  2) Fix hang on Acer logo problem.
  3) Fix VBIOS issue for plug HDMI cable during post time cause HDMI switching abnormal.
  4) Modify flash tool to support check BIOS model name.
  5) Change HDPSW Status to "Froze" and disable "Set HD Password" function after warmboot system.
     (BCIC312 & BCIC313)
  6) Clean Supervisor and User password when short CMOS RTC_RST pin.
  7) Reduce post time.
  8) Disable ASLM for nVidia VGA.
  9) Implement panel "AUO B141PW03 V1".
  10) Fix ePower can't get Battery Manufacturer name.
  11) Improve power consumption.
  12) Fix the most input Hddpassword character can't exceed 8 characters.
  13) Fix blue tooth will lost after resume from S4 or S3.
  14) Fix hang on during download WinPE.
  15) Implement second souce of clockgen for JAL90. (only for JAL90)
  16) Update Kernel code to 2030.
  17) Update Kernel code to 2031.
  18) Update SeamlessUsb code and enable SemlessUsb control.
  19) Clear info string when S4 Resume.
  20) Fix system hang during via INT15 to get Panel Resolution.
  22) Implement VBIOS 1604
  23) Fix system no sound on DOS mode.

EC:
 None.

+==============================================================================+
|   MODEL NO. :  JAL90                                RELEASE DATE : 03/13/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.16                                                 |
|   KBC BIOS Version   : V0.16                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : 1598                                                  |
|   Kernel Version     : 2029                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : C Build                                               |
|   Clock Generator(discrete): 01h,85h,E8h,FDh,CFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Clock Generator(UMA) :     01h,85h,E8h,F5h,FFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Checksum (FD)      : 5BD0h                                                 |
+==============================================================================+
BIOS:
  1) Disable "Dynamic FSB Switching" in SetupMenu to fix some long run issue.
  2) Update Intel VBIOS V1598.
  3) Disable Boot Menu show [EFI Boot Option List](Vista x64 install disc)
  4) Implement EON 25F16 flash part. (For JALA0)
  5) change Acer logo for C Build
  6) Update Kernel 2027 to 2028.
  7) Update Kernel code to 2029.
  8)  Fix "Fn" hot key fail in Windows.
  9) Write HDCP Key to cmos for tool read.
 10) Modify WMI function for non Broadcom LAN.(for JAL90 & JAT10)
 11) Fix boot to hdd directly, no need to ask hdd paswd again, if Hdd paswd is the same as User/Supervisor paswd.

EC:
  1) Add read manufacture id of CPU thermal sensor.

+==============================================================================+
|   MODEL NO. :  JAL90                                RELEASE DATE : 03/06/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.15                                                 |
|   KBC BIOS Version   : V0.15                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : V1588                                                 |
|   Kernel Version     : 2027                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : B Build                                               |
|   Clock Generator(discrete): 01h,85h,E8h,FDh,CFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Clock Generator(UMA) :     01h,85h,E8h,F5h,FFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Checksum (FD)      : 6C48h                                                 |
+==============================================================================+
BIOS:
  1) Reduce Post time.
  2) Speed up BIOS ROM flash time.
  3) Fixed setting hdd password can't auto-restart on DC mode.
  4) Fix INT15 can't work under WINPE/XP mode.
  5) Disable "Fn" hot key function on setup meun.
  6) Update Kernel 2026 to 2027.
  7) Enable MIR ON WINXP.
  8) Implement IO Arcade function.

EC:
  1) Modify disable "Fn" hot key function on Setup Menu.

+==============================================================================+
|   MODEL NO. :  JAL90                                RELEASE DATE : 02/27/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.14                                                 |
|   KBC BIOS Version   : V0.14                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : V1588                                                 |
|   Kernel Version     : 2026                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : B Build                                               |
|   Clock Generator(discrete): 01h,85h,E8h,FDh,CFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Clock Generator(UMA) :     01h,85h,E8h,F5h,FFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Checksum (FD)      : F3BFh                                                 |
+==============================================================================+
BIOS:
  1) Correct setup menu message for meet spec.(BCIC235)
  2) Clear info string before into SCU/BootManager.
  3) Implement memory map for fix S4 resume will show "windows boot manager".
  4) Fix when press F2 or F12 key during POST, there is a "!" sign on the screen.
  5) Set HDD park before "set/clear HDD password then save&exit" in SCU.(BCIC261)
  6) Solved F10 function will cause white block when save ready
     and then exit the SCU before the some SCU items be change.
  7) User password can the same as supervisor password for meet spec.
  8) Fix "Sku4 and Sku5. Set closing lid as Do nothing, close lid and open,
     there will be a blackscreen."

EC:
  1) Cypress media board's "play" button has no function and
     the LED will be light on after resume from S3/S4.
  2) Cypress media board will be detonated after close the LCD.

+==============================================================================+
|   MODEL NO. :  JAL90                                RELEASE DATE : 02/20/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.13                                                 |
|   KBC BIOS Version   : V0.13                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : V1588                                                 |
|   Kernel Version     : 2026                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : B Build                                               |
|   Clock Generator(discrete): 01h,85h,E8h,FDh,CFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Clock Generator(UMA) :     01h,85h,E8h,F5h,FFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Checksum (FD)      : 9316h                                                 |
+==============================================================================+
BIOS:
  1) Fixd setup menu's Hdd password serial not match reality.
  2) Fix "Setup Utility" flickers after users load defaults.
  3) Fix Enter S4 will occur blue screen with code A0 with password set in BIOS Security.
  4) Fix the screen on Boot Menu flickers after "ESC" is pressed.
  5) Fix Boot Order in SCU cannot be controlled in supervisor mode after someone opens SCU in user mode.
  6) Implement Acer Battery WMI function.
  7) Implement Usb wake up function on Docking.
  8) Update Intel VBIOS to 1588.
  9) Fix Card reader D3E function can't run on AC mode.
  10) Modify display string for F2/F12 function.
  11) Modify SMbios Type0,1,2,3,4,7,11,12 string & Add SMbios Type10&Type22
  12) Implement HDCP key function.
  13) Fix input password conform Acer Feature.

EC:
  1) Write project ID to Cypress media board.

+==============================================================================+
|   MODEL NO. :  JAL90                                RELEASE DATE : 02/13/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.12                                                 |
|   KBC BIOS Version   : V0.12                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : V1573                                                 |
|   Kernel Version     : 2026                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : B Build                                               |
|   Clock Generator(discrete): 01h,85h,E8h,FDh,CFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Clock Generator(UMA) :     01h,85h,E8h,F5h,FFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Checksum (FD)      : F1F8h                                                 |
+==============================================================================+
BIOS:
  1) Fixd setup menu's Hdd password serial not match reality.
  2) Modify to Load Default Setting of Acer Feature.
  3) Modify to Get TouchPad Status of Acer Feature.
  4) Solve USB Port delay when insert some CCD Camera.
  5) Fix input password issue when the input charecter is not Acer Feature.
  6) Modify to get Mail Led Status of Acer Feature.
  7) Fix boot sequence can not load default by press F9.
  8) Fix Boot Menu show abnormally while EFI boot devices exist(Vista x64 install disc).
  9) Fix the screen on Boot Menu flickers after any device is chosen.
  10) Fix the most input password character can't exceed 8 characters.
  11) Fixed Led config error when PXE boot.
  12) Solve CPU P-State enable will cause system S4/S5 stop.
  13) Update Hdmi switch strength.

EC:
  1) Update KB926 common source code V40.
  2) Modify S4 LED status follow "Acer notebook LED Spec v1.8.xls" 
  3) Modify data type of LI_BattCurrentLimited.

+==============================================================================+
|   MODEL NO. :  JAL90                                RELEASE DATE : 01/30/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.11                                                 |
|   KBC BIOS Version   : V0.11                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : V1573                                                 |
|   Kernel Version     : 2026                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : B Build                                               |
|   Clock Generator(discrete): 01h,85h,E8h,FDh,CFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Clock Generator(UMA) :     01h,85h,E8h,F5h,FFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Checksum (FD)      : 68C5h                                                 |
+==============================================================================+
BIOS:
  1) Fixed WMI battery function Fail.
  2) Fix password of Acer Feature.
  3) Fix when Boot order in boot menu will be crazy while pressing ESC key.
  4) Fix Winxp can't use lid function.
  5) modify to Get Asset Tag of Acer Feature.
  6) modify userpassword can't disable problem when disable supervisorpassword.
  7) modify password min-length to one word.
  8) modify error message problem when typing wrong password.
  9) Modify string of HDD information.
  10) Fix Panel can't be turn on if via USB mouse to resume from s3.
  11) Fixed Jmb385 D3E function can't work. 
  12) Implement disable Bluetooth when Load default.

EC:
  1) Fix LCD backlight may flash with some condition if update.
  

+==============================================================================+
|   MODEL NO. :  JAL90                                RELEASE DATE : 01/24/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.10                                                 |
|   KBC BIOS Version   : V0.10                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : V1573                                                 |
|   Kernel Version     : 2026                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : B Build                                               |
|   Clock Generator(discrete): 01h,85h,E8h,FDh,CFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Clock Generator(UMA) :     01h,85h,E8h,F5h,FFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Checksum (FD)      : 2D3Bh                                                 |
+==============================================================================+
BIOS:
  1) Fixed PCI express-Lan card can't be detect when insert it in S3 mode.
  2) Add Nvidia NB9P-GE2 string to setup menu.
  3) Implement JMB385 D3E function.
  4) modify to Get/Set/En BlueTooth device status of Acer Feature.
  5) modify to Get/Set/En 802.11 device status of Acer Feature.
  6) modify to Check Adapter Status of Acer Feature.
  7) Modify MXM setting for nVidia request.

EC:


+==============================================================================+
|   MODEL NO. :  JAL90                                RELEASE DATE : 01/19/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.09                                                 |
|   KBC BIOS Version   : V0.09                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : V1573                                                 |
|   Kernel Version     : 2026                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : B Build                                               |
|   Clock Generator(discrete): 01h,85h,E8h,FDh,CFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Clock Generator(UMA) :     01h,85h,E8h,F5h,FFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Checksum (FD)      : CD9Fh                                                 |
+==============================================================================+
BIOS:
  1) Update BIOS Kernel to 2026
  2) Disable S4 wake up function of modem.
  3) Fill Fake MAC address,when no MAC address(for speed up product line).
  4) Correct Nvidia chipset string on setup menu.
  5) update Verb Table For disable Realtek HDMI from UI.
  6) modify to get boot BootSequence of int15 function.
  7) modify to get CCD type of int15 function.
  8) modify to Get IDE drive type of int15 function.
  9) modify to Set FirstBoot Device of int15 function.
  10) Remove Bluetooth wake function.

EC:



+==============================================================================+
|   MODEL NO. :  JAL90                                RELEASE DATE : 01/10/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.08                                                 |
|   KBC BIOS Version   : V0.08                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : V1573                                                 |
|   Kernel Version     : 2025                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : B Build                                               |
|   Clock Generator(discrete): 01h,85h,E8h,FDh,CFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Clock Generator(UMA) :     01h,85h,E8h,F5h,FFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Checksum (FD)      : A280h                                                 |
+==============================================================================+
BIOS:
  1) Update BIOS Kernel to 2025
  2) Follow the ACER new request, update setup menu setting.
  3) Solve D2D function fail.
  4) Fix when resume from s3, Verb table will lose.
  5) modify to HotKey String dispear when press morn than once hotkey.
  6) Update MXM structure for nVidia request.
  7) Completely display the item "CPU type" of Setup Menu.
  8) Solved the skill 076's Menu item error at "VGA BIOS Version" of Setup Menu.
  9) Clear the Help region when change the page of Setup Menu.

EC:
  1) Update KB926 common source code V39.
  2) Modify BATTERY_OVP to 1.4985V follow "JAL90 SW parameter VerX06 (JAT10).doc".
  3) Modify fan control table follow "JAL90_JALA0_B_Stage_Thermal Control Table_2008_0107_v2.xls"

+==============================================================================+
|   MODEL NO. :  JAL90                                RELEASE DATE : 01/04/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.07                                                 |
|   KBC BIOS Version   : V0.07                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : V1573                                                 |
|   Kernel Version     : 2023                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : B Build                                               |
|   Clock Generator(discrete): 01h,85h,E8h,FDh,CFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Clock Generator(UMA) :     01h,85h,E8h,F5h,FFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Checksum (FD)      : 9935h                                                 |
+==============================================================================+
BIOS:
  1) Modify D2D function can workable.
  2) Solve Winflash hang-up when running the procedure.
  3) Fix when resume from S4, can boot from LAN.
  4) Modify Boot Priority.
  5) Fix can't install Vista in HDD AHCI mode.
  6) Correct Nvidia chipset string on setup menu.
  7) Change Ide mode default from IDE to AHCI.
  8) Add Brightness WMI function on Vista.

EC:
  1) Fix BCIC004 Fan speed issue.
  2) Enable WatchDog function.
  3) Modify IREF follow "JAL90 SW parameter VerX06 (JAT10).doc".

+==============================================================================+
|   MODEL NO. :  JAL90                                RELEASE DATE : 12/31/07  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.06                                                 |
|   KBC BIOS Version   : V0.06                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : V1573                                                 |
|   Kernel Version     :                                                       |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : B Build                                               |
|   Clock Generator(discrete): 01h,85h,E8h,FDh,CFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Clock Generator(UMA) :     01h,85h,E8h,F5h,FFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Checksum (FD)      : E426h                                                 |
+==============================================================================+
BIOS:
  1) Add s3 resume fill verbtable and modem.
  2) Change the Menu function key and direction of choice from F5 to F6.
  3) Disable C-States at Setup Menu.
  4) Disable PEG ASPM.
  5) Added load default function when short CMOS RTC_RST pin.
  6) Fix when enable PXE, can't entry setup menu.
  7) Restore Lan's SVID when S3 resume.
  8) Disable dynamic fsb switching at Setup Menu.
  9) Implement TouchPad Function.
  10) Implement Acer WMI function.
  11) Update MXM structure.
  12) Implement CRISIS function.
  13) Fix the boot order scrabble on setup menu.

EC:
  1) Modify Wireless/Bluetooth device status behavior.
  2) Add Adaptor protect function.
  3) Modify BATTERY_OVP to 1.5012V.
  4) Add ADP_I function.(UMA:65W, Discrete:90W)
  5) Add pull low CALIBRATE# when CycleCount>100.

+==============================================================================+
|   MODEL NO. :  JAL90                                RELEASE DATE : 12/25/07  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.06T03                                              |
|   KBC BIOS Version   : V0.06T03                                              |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : V1573                                                 |
|   Kernel Version     :                                                       |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : B Build                                               |
|   Clock Generator(discrete): 01h,85h,E8h,FDh,CFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Clock Generator(UMA) :     01h,85h,E8h,F5h,FFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Checksum (FD)      : A8FEh                                                 |
+==============================================================================+
BIOS:
  1) Add s3 resume fill verbtable and modem.
  2) Implement Disable RTC wake fuction When Enter Hibernate by Manual.
  3) Implement Notify EC 65w and 90w adapater.
  4) Add a function to support PENRYN CPU of Acer Feature.
  5) Change the Menu function key and direction of choice from F5 to F6.
  6) Disable C-States at Setup Menu.
  7) Disable PEG ASPM.
  8) Solved the Menu item error at "CPU type" and "VGA BIOS Version" of Setup Menu.
  9) Fix when enable PXE, can't entry setup menu.

EC:
  1) Modify Wireless/Bluetooth device status behavior.
  2) Add Adaptor protect function.

+==============================================================================+
|   MODEL NO. :  JAL90                                RELEASE DATE : 12/22/07  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.05                                                 |
|   KBC BIOS Version   : V0.05                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : V1573                                                 |
|   Kernel Version     :                                                       |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : B Build                                               |
|   Clock Generator(discrete): 01h,85h,E8h,FDh,CFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Clock Generator(UMA) :     01h,85h,E8h,F5h,FFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Checksum (FD)      : 4208h                                                 |
+==============================================================================+
BIOS:
  1) Fix Card Reader function.
  2) Enable MIR device function.
  3) Implement LAN function when remove the LAN EEPROM.
  4) Fix After resume from S3, VGA -HDMI port output no screen.
  5) Modify ACER setup menu.
  6) Implement Acer ALT+F10 function.
  7) Implement Acer WMI function.
  8) Implement Acer Int15 function.
  9) Enable Fan always on before flash bios.
  10) Enable blue tooth power during warm boot or cold boot.
  11) Change WLAN port reference HW.(for B-Test only)
  
EC:
  1) Modify Wireless/Bluetooth device status behavior.
  2) Modify Battery setting follow
     "JAL90 SW parameter VerX05.doc".
  3) Disable fan full on, and update fan control table follow
     "JAL90_JALA0_B_Stage_Thermal Control Table_2007_1212_v1.xls".
  4) Change TI media button to SMBus2.
  5) Add read VGA T-Diode temperature.
     Add "write 0x15 to thermal sensor 0x27" to support SMSC use on Penryn CPU.
  6) Add JAW50 button.

+==============================================================================+
|   MODEL NO. :  JAL90                                RELEASE DATE : 12/14/07  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.04                                                 |
|   KBC BIOS Version   : V0.04                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : V1573                                                 |
|   Kernel Version     :                                                       |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : A Build                                               |
|   Clock Generator(discrete): 01h,85h,E8h,FDh,CFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Clock Generator(UMA) :     01h,85h,E8h,F5h,FFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Checksum (FD)      : 92B6h                                                 |
+==============================================================================+
BIOS:
  1) Modify driver strength for HDMI switch.
  2) Support EON EN25F80 flash part.
  3) Fixed UMA platform running warm boot process will cause system hang-up with black screen.
  4) Fix when disable F12 function on setup menu, user still can press F12 start Boot manager.
  5) Fix after resume from S3, BT will auto enable on system.
  6) Fix AUO B141EW04/LPL LP141WX3 Panel can't correct adjust Brightness.
  7) Fix After resume from S3, VGA -HDMI port output no screen.
  8) Added ATI M82M audio controller Resource.

EC:
  1) Fix media button backward and forward.
  2) Update KB926 common source code V38.
  3) Modify brightness table.
  4) Add PIN EC_ACIN and ID_JAL90_JAW50#
  5) Remove PIN +RTCVCC.
  6) Add MIR function.

+==============================================================================+
|   MODEL NO. :  JAL90                                RELEASE DATE : 12/07/07  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.03                                                 |
|   KBC BIOS Version   : V0.03                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : V1566                                                 |
|   Kernel Version     :                                                       |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : A Build                                               |
|   Clock Generator(discrete): 01h,85h,E8h,FDh,CFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Clock Generator(UMA) :     01h,85h,E8h,F5h,FFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Checksum (FD)      : F409h                                                 |
+==============================================================================+
BIOS:
  1) Implement Variable Function.
  2) Filled HDA controller SVID.
  3) Filled Peg Vga Audio codec controller SVID.
  4) Modify Wireless Lan Class range for BCM Wlan class type
     for solve WLAN can't enable by WLAN on/off button.

EC:
  1) Add Media button function.

+==============================================================================+
|   MODEL NO. :  JAL90                                RELEASE DATE : 11/10/07  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.02                                                 |
|   KBC BIOS Version   : V0.02                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      :                                                       |
|   Kernel Version     :                                                       |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : A Build                                               |
|   Clock Generator(discrete): 01h,85h,E8h,FDh,CFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Clock Generator(UMA) :     01h,85h,E8h,F5h,FFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Checksum (FD)      : A3C4h                                                 |
+==============================================================================+
BIOS:
  1) Modify HDMI Switch.
  2) Post code 0xCC speed up.
  3) Modify wake on modem ring function & open PXE boot function.
  4) Implement Pci-E New Card Hot Plug.
  5) Fixed After install VGA driver, display will change to D-Sub only.
  6) Fix press power button system shutdown right now on bios logo screen.

EC:
  1) Add send SCI/SMI when docking change.
  2) Add BT_LED control.


+==============================================================================+
|   MODEL NO. :  JAL90                                RELEASE DATE : 11/10/07  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.01T01                                              |
|   KBC BIOS Version   : V0.01T01                                              |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      :                                                       |
|   Kernel Version     :                                                       |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : A Build                                               |
|   Clock Generator(discrete): 01h,85h,E8h,FDh,CFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Clock Generator(UMA) :     01h,85h,E8h,F5h,FFh,1Bh,03h,11h,50h,C5h,7Dh,11h |
|   Checksum (FD)      : 181Eh                                                 |
+==============================================================================+
BIOS:
  1) Setup compiler environment.
  2) Modify GPIO Table.
  3) Modify Clock Generator.
  4) Implement Acer Int15 function.
  5) Take off setupmenu's mouse.
  6) Implement Oem Acpi Information.      
  7) Implement Acer Boot menu function.
  8) Implement OemPost Function.
  9) Implement Acer logo.
  10) Implement ODM function.
  11) Implement PasswordBackdoor.
  12) Implement WMI.
  13) Implement SLP1.0.
  14) Implement SLP2.0.
  15) Implement Relteak 8111c-GR PXE Rom.
  16) Implement PostDisplayDevice.
  17) Implement Setup Menu.
  
EC:
  1) Modify the name, ID and version of project.
  2) Modify pin define, initial value and behavior.
  3) Modify power sequence refer to ICL50 v121.     
  4) Define Index IO port 0xFF2C.                   
  5) Disable watchdog function.                     
  6) Enable fan always full on.                    
  7) EC_DOCKIN# follow DOCKIN#.                    
  8) EC_MUTE follow ICL50 behavior.                