+============================================================================+
			JAT10 Release Note
+============================================================================+
BIOS CORE Version ................  Insyde EFI 2.0
CPUs Supported    ................  Intel Penryn 800/1067 MHz
Chipset           ................  Intel Cantiga
Bridge            ................  Intel ICH9M
Video             ................  UMA
LCD Size          ................  12 TFT WXGA
Memory            ................  DDR2/3 667/800/1067 MHz
HDD               ................  SATA
ODD               ................  SATA
PCMCIA            ................  N/A
Card Reader       ................  JBM385 (5in1)
1394 controller   ................  N/A
Audio             ................  HD Audio Realtek ALC888
LAN               ................  Realtek RTL8111C-GR
KBC               ................  ENE 926
Clock Generator   ................  ICS9LPRS387
Super I/O         ................  N/A
BIOS ROM Part	  ................  MX25LV8005M2C/EN25F80 (SPI_FLASH:1MB)
Finger print	  ................  Authentec AES1610
+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 05/20/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V1.01                                                 |
|   KBC BIOS Version   : V1.01                                                 |
|   VGA BIOS(discrete) :                                                       |
|   VGA BIOS(uma)      : 1625                                                  |
|   Kernel Version     : 2034                                                  |
|   Flash Utility Ver  : 1.2n                                                  |
|   Phase Status       : Pre-mp Build                                          |
|   Clock Generator 	 : 01h,85h,ech,3dh,ffh,18h,00h,11h,50h,C5h,7dh	         |
|   Checksum (FD)      : DC35h                                                 |
+==============================================================================+
BIOS:
    1)Implement Dummy ODD support
    2)Fix INT15 function can't detect Suyin CCD
    3)Disable Intel WLAN L0s
    4)For XP DTM test
    5)Fix D2D function when set HDD password
    6)Modify SMBIOS Type 2 product name and follow Type 1 Product name
    7)Fix can't detect memory card if card reader enter D3E
    8)Change temperature address of CeCTe
    9)Fix Hdcp.exe read error key
    10)Workaround for WINPE Download solw
EC:
    1)Modify BT/WL status behaviors follow new BIOS SPEC.(WL on/BT off when cold/warm boot into OS.)
    2)Swap name space of offset 0x22 and 0x25.

+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 05/12/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V1.00                                                 |
|   KBC BIOS Version   : V1.00                                                 |
|   VGA BIOS           : 1625                                                  |
|   Kernel Version     : 2034                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : C Build                                               |
|   Clock Generator    : 01h,85h,ech,3dh,ffh,18h,00h,11h,50h,C5h,7dh           |
|   Checksum (FD)      : 9E1Eh                                                 |
+==============================================================================+
BIOS:
    1)Release for Golden.
EC:
    None
     
+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 05/07/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.23                                                 |
|   KBC BIOS Version   : V0.23                                                 |
|   VGA BIOS           : 1625                                                  |
|   Kernel Version     : 2034                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : C Build                                               |
|   Clock Generator    : 01h,85h,ech,3dh,ffh,18h,00h,11h,50h,C5h,7dh           |
|   Checksum (FD)      : 3ED4h                                                 |
+==============================================================================+
BIOS:
    1)Fix B2 step chipset can't install RTM6000.
    2)Fix S4 resume time fail under Windows Xp.
    3)Fix INT15 can't work under WINPE/XP mode.
    4)Fix S3 resume can't unlock HDPSWD after system restart.
    5)Fix can't Find 1394 express card when s3 resume.
    6)Change temperature address of CeCTe.
    7)Disable Dynamic FSB.
    8)Disable Atheros WLAN L1.
    9)Enable Realtek ALC888 LAN's L1.
EC:
    1)Swap NAME space 0xF4B2 and 0xF4B5 of CeCTe.
    2)Implement common code. The list number is L08040701.

+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 04/29/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.22                                                 |
|   KBC BIOS Version   : V0.22                                                 |
|   VGA BIOS           : 1625                                                  |
|   Kernel Version     : 2034                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : C Build                                               |
|   Clock Generator    : 01h,85h,ech,3dh,ffh,58h,00h,11h,50h,C5h,7dh           |
|   Checksum (FD)      : 63A6h                                                 |
+==============================================================================+
BIOS:
    1)Enable Intel PAVP funciton
    2)Fix while winflash, speaker makes bobo abnormal sound
    3)Implement D3E function
    4)Fixed hang on windows bar
    5)Implement Japan keyboard support
    6)Fix S3 resume hang when DTM testing
    7)Implement DOS throttle
    8)Modify DTS's FAN table
EC:
    1)Followed HW hard plug in/out's delay time.(Input delay 600ms, output dealy 1sec.) 
    2)Modify UK keyboard.
               
+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 04/22/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.21                                                 |
|   KBC BIOS Version   : V0.21                                                 |
|   VGA BIOS           : 1625                                                  |
|   Kernel Version     : 2034                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : C Build                                               |
|   Clock Generator    : 01h,85h,ech,3dh,ffh,58h,00h,11h,50h,C5h,7dh           |
|   Checksum (FD)      : 03A4h                                                 |
+==============================================================================+
BIOS:
    1)Update Kernel code to 2034
    2)Solve memory size information error over 3G on SMBIOS
    3)Fixed "if enable EHCI wake up function, blue tooth device will lost after resume from s3/s4.
    4)Fix press F2 can't into scu after display "acer" Logo
    5)Fixed Windows Xp can't recognize battery 
    6)Windows Xp Hibernate can't recognize battery from S3
    7)Implement Battery Device name.
    8)Improve Power consumption
EC: 
    1)Added Cmd 45 Data D4 to prevent while the machine enter S3 then resume by itself.
 	    When the machine has connected a bluetooth device
 	  
+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 04/15/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.20                                                 |
|   KBC BIOS Version   : V0.20                                                 |
|   VGA BIOS           : 1618                                                  |
|   Kernel Version     : 2033                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : C Build                                               |
|   Clock Generator    : 01h,85h,ech,3dh,ffh,58h,00h,11h,50h,C5h,7dh           |
|   Checksum (FD)      : BEADh                                                 |
+==============================================================================+
BIOS:
    1)Update UMA VBIOS 1618
    2)Solution for fix USB CD-ROM device can't correctly show on SCU and Boot Menu bug
    3)Update Kernel code to 2033
    4)Update new SeamlessUsb code and enable SemlessUsb control
    5)Fix wait long time to power on system when press power button
    6)Improve Power consumption
EC:     
    1)Updated the Thermal fan control table by thermal release on 4/15.
    
+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 04/08/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.19                                                 |
|   KBC BIOS Version   : V0.19                                                 |
|   VGA BIOS           : 1604                                                  |
|   Kernel Version     : 2032                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : C Build                                               |
|   Clock Generator    : 01h,85h,ech,3dh,ffh,58h,00h,11h,50h,C5h,7dh           |
|   Checksum (FD)      : 19C3h                                                 |
+==============================================================================+
BIOS:
    1)Password must be reserved when users enter the flash command
    2)Solve Enter Setup Asset Tag shows abnormal when write Asset Tag
    3)Change HDPSW Status to "Froze" and disable "Set HD Password" function after HDD Frozen
    4)Reduce POST time
    5)Implement battery serial number
    6)Implement report s3 and s4 power consumption on WMI
    7)Implement DTS function
    8)Update Kernel code to 2032
    9)Improve Power consumption
EC: 
    1)Added hard plug function
    
+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 04/01/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.18                                                 |
|   KBC BIOS Version   : V0.18                                                 |
|   VGA BIOS           : 1604                                                  |
|   Kernel Version     : 2031                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : C Build                                               |
|   Clock Generator    : 01h,85h,ech,3dh,ffh,58h,00h,11h,50h,C5h,7dh           |
|   Checksum (FD)      : F9BDh                                                 |
+==============================================================================+
BIOS:
    1)Improve Power consumption
    2)Remove string limitation for Asset Tag
    3)Disable Graphics Render Standby Mode
    4)Disable Deep C4 and C6 if CPUID is 10674
    5)Fix input password not case sensitive when enable power on password 
    6)Fix Usb PORT resume form s3/s4 near AC/DC slot.
    7)Fix "dingdong" sound pop up when plug in/out a PCI-E card reader to the unit
EC:
    NO
    
+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 03/25/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.17                                                 |
|   KBC BIOS Version   : V0.17                                                 |
|   VGA BIOS           : 1604                                                  |
|   Kernel Version     : 2031                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : C Build                                               |
|   Clock Generator    : 01h,85h,ech,3dh,ffh,58h,00h,11h,50h,C5h,7dh           |
|   Checksum (FD)      : 2C1Bh                                                 |
+==============================================================================+
BIOS:
    1)Improve Power consumption
    2)Solution for fix SMI can destroy CFC and CF8 port value to cause hang on during download WinPE
    3)Update Kernel code to 2031
    4)Update Kernel code to 2030
    5)Fix the most input Hddpassword character can't exceed 8 characters
    6)Fix ePower can't get Battery Manufacturer name  
    7)Reduce post time
    8)Clean Supervisor and User password when short CMOS RTC_RST pin
    9)Change HDPSW Status to "Froze" and disable "Set HD Password" function after warmboot system
    10)Update Intel VBIOS V1604
    11)Fix new card hot plug some time occur blue screen 0xD1 issue
    12)Fix User password can't modified by supervisor's password
EC:
    1)Added a work-run for platform will hang up in windows bar issue.
 	  2)Modify the LID_out initial status to keep high.
 	  3)Modify the fan out initial voltage, in fan side will have 3V input.
 	  
+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 03/18/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.16                                                 |
|   KBC BIOS Version   : V0.16                                                 |
|   VGA BIOS           : 1598                                                  |
|   Kernel Version     : 2029                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : B Build                                               |
|   Clock Generator    : 01h,85h,ech,3dh,ffh,58h,00h,11h,50h,C5h,7dh           |
|   Checksum (FD)      : D96Dh                                                 |
+==============================================================================+
BIOS:
    1)Disable "Dynamic FSB Switching" in SetupMenu to fix some long run issue.
    2)Update Intel VBIOS V1598.
    3)Disable Boot Menu show [EFI Boot Option List](Vista x64 install disc)
    4)change Acer logo for C Build
    5)Update Kernel code to 2029
    6)Solved memory test tool only detect memory size is 3070M under DOS.
    7)Fixed function key can't used under windows mode
    8)Write HDCP Key to cmos for tool read
    9)Modify flash tool to support check BIOS model name
    10)Fix hang on Acer logo problem
    11)Fix If enter "New pw" different with "Confirm pw" to modify HDD pw,it will let you to create a new pw.
    12)Clear info string when S4 Resume
EC: 
    1)Fixed can't be charged in 0 degree.
    
+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 03/11/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.15                                                 |
|   KBC BIOS Version   : V0.15                                                 |
|   VGA BIOS           : 1588                                                  |
|   Kernel Version     : 2027                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : B Build                                               |
|   Clock Generator    : 01h,85h,ech,3dh,ffh,58h,00h,11h,50h,C5h,7dh           |
|   Checksum (FD)      : 8C62h                                                     |
+==============================================================================+
BIOS:
    1)Modify flashmap for long run issue
    2)Fix boot to hdd directly, no need to ask hdd paswd again,if Hdd paswd is the same as User/Supervisor paswd
    3)Fix INT15 can't work under WINPE/XP mode
    4)Wprkaround for RI wake up even from S3 resume
    5)Disable PCI-Express port 2,3,4,5 hot plug.
    6)Implement shutdown then restart when Winflash done
    7)Change shutdown then restart command when dos-flash done
    8)Add Echo Peak of Acer Feature
    9)Fix get Asset tag of Acer Feature
    10)Fixed setting hdd password can't auto-restart on DC mode
    11)Speed up flash time
    12)Reduce Post time.(Removing DiskIo, Fat, Partitoon can reduce about 2 seconds)
EC: 
    NO   
    
+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 03/04/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.14                                                 |
|   KBC BIOS Version   : V0.14                                                 |
|   VGA BIOS           : 1588                                                  |
|   Kernel Version     : 2027                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : B Build                                               |
|   Clock Generator    : 01h,85h,ech,3dh,ffh,58h,00h,11h,50h,C5h,7dh           |
|   Checksum (FD)      : 03C5h                                                 |
+==============================================================================+
BIOS:
    1)Solved system will hang with post code 48 when first boot after programing SPI ROM.
    2)User password can the same as supervisor password for meet spec
    3)Solved F10 function will cause white block when save ready and then exit the SCU before the some SCU items be change.
    4)Correct quad code restart fail after resume from S3 on Vista32 OS.
    5)Correct C state of process 1 work incorrectly during power switching between AC and DC mode.
    6)Set HDD park before "set/clear HDD password then save&exit" in SCU.
    7)Fix when press F2 or F12 key during POST, there is a "!" sign on the screen.
    8)Solved Boot Management haven't any boot device and them enter "boot form file" item will show incompletely.
    9)Clear info string before into SCU/BootManager
    10)Correct setup menu message for meet spec.
    11)Update kernel code from 2026 to 2027 
EC:
    1)Modify the fan trip point for new fan.
    
+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 02/26/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.13                                                 |
|   KBC BIOS Version   : V0.13                                                 |
|   VGA BIOS           : 1588                                                  |
|   Kernel Version     : 2026                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : B Build                                               |
|   Clock Generator    : 01h,85h,ech,3dh,ffh,58h,00h,11h,50h,C5h,7dh           |
|   Checksum (FD)      : AE62h                                                 |
+==============================================================================+
BIOS:
    1)Implement memory map for S4 resume will show "windows boot manager".
    2)Fix power on password conform Acer Feature
    3)Fix input password conform Acer Feature(password not case sensitive)
    4)Fix F10 no function when enter setup with user password.
    5)Fix pressing "V", "S" or "W" could change boot option in Boot Manager.
    6)Implement HDCP key function.
    7)Fixed SMbios Type0,1,2,3,4,7,11,12 string.
    8)Add  SMbios  Type10&Type22
    9)Modify display string for F2/F12 function.
    10)Fixed Card reader D3E function can't run on AC mode.
    11)Update Intel VBIOS 1588 and correct Post logo color.
    12)Fix Boot Order in SCU cannot be controlled in supervisor mode after someone opens SCU in user mode.
    13)Implement Acer Battery WMI function.
    14)Fix the screen on Boot Menu flickers after "ESC" is pressed.
    15)Implement Usb wake up function on Docking.
    16)Fix Enter S4 will occur blue screen with code A0 with password set in BIOS Security.
    17)Fix PCI scan fail cause hang on AcerLogo.
    18)Fix "Setup Utility" flickers after users load defaults.
    19)Setting Manufacturer Name to "Acer" on Smbios Type 01,02.
    20)Fixd setup menu's Hdd password serial not match reality. 
EC:
    1)Modify adatpor protection behavior.
	  2)Modify data type of LI_BattCurrentLimited.
	  3)Modify the fan output degree table for new fan.
	  
+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 02/19/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.12                                                 |
|   KBC BIOS Version   : V0.12                                                 |
|   VGA BIOS           : 1573                                                  |
|   Kernel Version     : 2026                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : B Build                                               |
|   Clock Generator    : 01h,85h,ech,3dh,ffh,58h,00h,11h,50h,C5h,7dh           |
|   Checksum (FD)      : 9D4Ch                                                 |
+==============================================================================+
BIOS:
    1)Fix setup menu power setting
    2)Modify PCIE and USB Ports.
    3)Fixed SMbios Type1 & Type2 string
    4)Solve CPU P-State enable will cause system S4/S5 stop
    5)Update PXE rom 2.13 for Fixed Led config error when PXE boot
    6)Fix the most input password character can't exceed 8 characters
    7)Fix Boot Menu show abnormally while EFI boot devices exist(Vista x64 install disc)
    8)Fix the screen on Boot Menu flickers after any device is chosen
    9)Fix boot sequence can not load default by press F9
    10)modify to get Mail Led Status of Acer Feature
    11)Fix input password issue when the input charecter is not Acer Feature
    12)Solve USB Port delay when insert some CCD Camera
    13)modify to Load Default Setting of Acer Feature
    14)modify to Get TouchPad Status of Acer Feature
    15)Modify system information for Copyright
    16)Disable SATA hot plug function
EC:   
    1)Update KB926 common source code V40.
    2)Modify S4 LED status follow "Acer notebook LED Spec v1.8.xls" 
    3)Modify data type of LI_BattCurrentLimited.
    
+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 02/12/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.11                                                 |
|   KBC BIOS Version   : V0.11                                                 |
|   VGA BIOS           : 1573                                                  |
|   Kernel Version     : 2026                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : B Build                                               |
|   Clock Generator    : 01h,85h,ech,3dh,ffh,58h,00h,11h,50h,C5h,7dh           |
|   Checksum (FD)      : A0DEh                                                 |
+==============================================================================+
BIOS:
    1) Fixd under SUC weren't shutdown after reset HddPassword
    2) Implement disable Bluetooth when Load default
    3) Fix Crisis can't work
    4) Fixed WMI battery function Fail
    5) Fix password of Acer Feature
    6) Update Microcode.(CPUID = 10676 .Reversion: 60C)
    7) Remove _RMV function of SD controller
    8) Fix whtn Boot order in boot menu will be crazy while pressing ESC key
    9) modify to Get Asset Tag of Acer Feature
    10) modify userpassword can't disable problem when disable supervisorpassword
    11) modify password minlength to one word
    12) modify error message problem when typing wrong password
    13) Disable Hot plug of PCI Express port 2/4.
    14) Modify string of HDD information.
    15) Disable HDD Port 5/6.
    16) Fix Panel can't be turn on if via USB mouse to resume from s3
EC:  
    1) When discharge battery to 10%, it has "bibi" noise.
    2) Press Fn+right,left key to adjust brightness in doss mode it will output some characters.
       If have pressed number lock,then press Fn+left key it will output nothing. 
    3) Add DVR debounce function refer to ICL50.
    4) Add save SBDAT BatteryMode(0x03) to EC namespace 0x08-0x09
 	  
+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 01/31/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.10                                                 |
|   KBC BIOS Version   : V0.10                                                 |
|   VGA BIOS           : 1573                                                  |
|   Kernel Version     : 2026                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : B Build                                               |
|   Clock Generator    : 01h,85h,ech,3dh,ffh,58h,00h,11h,50h,C5h,7dh           |
|   Checksum (FD)      : 5A95h                                                 |
+==============================================================================+
BIOS:
   1) Fix s3 resume time too long.
   2) Fixed PCI express-Lan card can't be detect when insert it in S3 mode.
   3) Implement JMB385 D3E function.
   4) modify to Get/Set/En 802.11 device status of Acer Feature 
   5) modify to Get/Set/En BlueTooth device status of Acer Feature
   6) Fix hdd password of Setup menu.
   7) modify to Check Adapter Status of Acer Feature

EC:
   1) Keep GPIO Pin of "Calibrate" High, and change this pin from 108 to 72.
   
+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 01/22/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.09                                                 |
|   KBC BIOS Version   : V0.09                                                 |
|   VGA BIOS           : 1573                                                  |
|   Kernel Version     : 2026                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : B Build                                               |
|   Clock Generator    : 01h,85h,ech,3dh,ffh,58h,00h,11h,50h,C5h,7dh           |
|   Checksum (FD)      : 94F5h                                                 |
+==============================================================================+
BIOS:
   1) Update Kernel from 2025 to 2026
   2) Fill Fake MAC address,when no MAC address(for speed up product line).
   3) modify to get boot BootSequence of int15 function.
   4) modify to get CCD type of int15 function.
   5) modify to Get IDE drive type of int15 function.
   6) modify to Set FirstBoot Device of int15 function.
   7) Early init Panel ID.
   8) modify to HotKey String display when press Hot Key before OemString showed.
   9) Modify GPIO for Card read.

EC:
   1) Implement the newest Thermal control table.
   2) Modified battery parameter base on SW parameter VerX07 document.
   3) Open watch dog function.

+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 01/15/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.08                                                 |
|   KBC BIOS Version   : V0.08                                                 |
|   VGA BIOS           : 1573                                                  |
|   Kernel Version     : 2025                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : A Build                                               |
|   Clock Generator    : 01h,85h,ech,3dh,ffh,58h,00h,11h,50h,C5h,7dh           |
|   Checksum (FD)      : 665Ah                                                 |
+==============================================================================+
BIOS:
   1) Update Kernel from 2023 to 2024
   2) Update Kernel from 2024 to 2025
   3) Modify D2D function can workable(INT15/D2D).
   4) Completely display the item "CPU type" of Setup Menu.(Menu)
   5) Clear the Help region when change the page of Setup Menu.(Menu)
   6) modify to HotKey String F2 dispear when press morn than once hotkey.

EC:
   1) Implement the newest Thermal control table.
   2) Fan full on when platform be turned on in three seconds.

+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 01/08/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.07                                                 |
|   KBC BIOS Version   : V0.07                                                 |
|   VGA BIOS           : 1573                                                  |
|   Kernel Version     : 2023                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : A Build                                               |
|   Clock Generator    : 01h,85h,ech,3dh,ffh,58h,00h,11h,50h,C5h,7dh           |
|   Checksum (FD)      : D749h                                                 |
+==============================================================================+
BIOS:
   1) Detect CCD type and then to write a CMOS flag 0x3C.
   2) modify to get touch pad type of Acer Feature.(INT15)
   3) modify to get IDE drive type of Acer Feature.(INT15)
   4) modify to get 1394 ID of Acer Feature.(INT15)
   5) modify to get Asset Tag of Acer Feature.(INT15)
   6) Add Brightness WMI function on Vista.(WMI)
   7) Change WMI Lan cable in from 9Ch.bit7 to 00h.bit3.(WMI)
   8) Change Ide mode default from IDE to AHCI.
   9) Fix can't install Vista in AHCI mode.
   10) Fix when resume from S4, can boot from LAN.
   11) Modify menu's Boot Priority.

EC:
   1) Implement the newest Thermal control table.

+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 01/02/08  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.06                                                 |
|   KBC BIOS Version   : V0.06                                                 |
|   VGA BIOS           : 1573                                                  |
|   Kernel Version     : 2023                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : A Build                                               |
|   Clock Generator    : 01h,85h,ech,3dh,ffh,58h,00h,11h,50h,C5h,7dh           |
|   Checksum (FD)      : ECAFh                                                 |
+==============================================================================+
BIOS:
   1) Update Kernel from 2022 to 2023
   2) Added load default function when short CMOS RTC_RST pin
   3) Fix after run "Load Optimal Defaults" and saving this settingwith reset system, sometimes the boot order will failed.
   4) Change setting "Network Boot" to ENABLE, "Dynamic FSB" to disable and "Numlock" to OFF at setupmenu.
   5) Implement TouchPad Function.
   6) Cancel the menu blank space before the menu item "HDD Serial Number".
   7) Save LAN SSID for S3 resume.
   8) Report entry ACPI mode to EC, when s3 resume.
   9) Disable C-States at Setup Menu.
   10) Change the Menu function key and direction of choice from F5 to F6.
   11) Add a function to support PENRYN CPU of Acer Feature for INT15.
   12) Implement Disable RTC wake fuction When Enter Hibernate by Manual.
   13) Implement Notify EC 65w and 90w adapater.
   14) Modify Clockgen for HW request.
   15) Implement Vista flash support.
   16) Implement Crisis.

EC:
   1) Open crisis function.
   2) Always keep adap6590Woff to high.
   3) Add pull low CALIBRATE# when CycleCount>100.
   4) Support SMSC thermal chip.

+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 12/25/07  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.05                                                 |
|   KBC BIOS Version   : V0.05                                                 |
|   VGA BIOS           : 1573                                                  |
|   Kernel Version     : 2022                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : A Build                                               |
|   Clock Generator    : 01h,85h,ech,3dh,ffh,7Eh,02h,11h,50h,C5h,7dh           |
|   Checksum (FD)      : 89A8h                                                 |
+==============================================================================+
BIOS:
   1) Implement Acer WMI function of Acer Feature.
   2) Implement Acer Smbios function of Acer Feature.
   3) Implement Acer Int15 function.
   4) Modify SCU to read EEPROM.
   5) Implement Acer Boot mode display.
   6) Modify s3 resume to keep VerbTable and modem.
   7) Solved Bluetooth LED can be turn on always.

EC:
   1) Resolve issue of items AC037 and AC038.

+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 12/18/07  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.04                                                 |
|   KBC BIOS Version   : V0.04                                                 |
|   VGA BIOS           : 1573                                                  |
|   Kernel Version     : 2022                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : A Build                                               |
|   Clock Generator    : 01h,85h,ech,3dh,ffh,7Eh,02h,11h,50h,C5h,7dh           |
|   Checksum (FD)      : B8FEh                                                 |
+==============================================================================+
BIOS:
   1) Combind new kernel code V2022.
   2) Modify ACER setup menu; function version is follow V0.0B from Insyde.
   3) Enable all CPU power states.
   4) Modify s3 restore table and remove unused SMI.
   5) Update VBIOS 1573 and disable spectrum for CRT.
   6) Modify ROM map and protect EEPROM.
   7) Fix when diskable F12 function on setup menu, user still can press F12 start Boot manager.
   8) Fix after resume from S3, BT will auto enable on system.
   9) Fixed UMA platform running warm boot process will cause system hang-up with black screen.
   10) Support EON EN25F80 flash part.

EC:
   1) Update common code from 0x35 to 0x38.
   2) Update the panel's brightness table.
   3) Open E-Key function.
   4) Keep Power LED control signal in Low status, when the platform enter S3 mode.

+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 12/11/07  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.03                                                 |
|   KBC BIOS Version   : V0.03                                                 |
|   VGA BIOS           : 1566                                                  |
|   Kernel Version     : 1021                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : A Build                                               |
|   Clock Generator    : 01h,85h,ech,3dh,ffh,7Eh,02h,11h,50h,C5h,7dh           |
|   Checksum (FD)      : 8AE0h                                                 |
+==============================================================================+
BIOS:
   1) Combind new kernel code V1021.
   2) Modify clock generator
   3) Modify Wireless Lan Class range for BCM Wlan class type.
   4) Filled HDA controller SVID.
   5) Fix S3 resume fail issue on Discrete platform
   6) Modify JMB385 SVID.
   7) Enable Variable Function.

EC:
   1) After OS shutdown, press power button will be shutdown again.
   2) Add send SCI/SMI when docking change.

+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 12/04/07  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.02                                                 |
|   KBC BIOS Version   : V0.02                                                 |
|   VGA BIOS           : 1566                                                  |
|   Kernel Version     : 1020                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : A Build                                               |
|   Clock Generator    : 01h,85h,ech,3dh,ffh,7Eh,02h,11h,50h,C5h,7dh           |
|   Checksum (FD)      : FDEEh                                                 |
+==============================================================================+
BIOS:
   1) Combind new kernel code V1020.
   2) Update Smbios Type 0,1 to Meet Finger print Request.
   3) Update Intel Vga Bios to V1566.
   4) Implement Ec IO PORT 68,6C.
   5) Disable Power Button SMI during POST.
   6) Fixed After install VGA driver, display will change to D-Sub only.
   7) Implement Pci-E New Card Hot Plug.
   8) Modify wake on modem ring function .
   9) Open PXE boot function.

EC:
   1) AC014 issue has been fixed.
   2) AC018 issue has been fixed.

+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 11/27/07  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.01                                                 |
|   KBC BIOS Version   : V0.01                                                 |
|   VGA BIOS           :                                                       |
|   Kernel Version     : 1019                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : A Build                                               |
|   Clock Generator    : 01h,85h,ech,3dh,ffh,7Eh,02h,11h,50h,C5h,7dh           |
|   Checksum (FD)      : E984h                                                 |
+==============================================================================+
BIOS:
   1) Base on Kernel code V1019 to modify source code to bring up platform.
   2) Implement EDID function and Modify Subsystem Vendor ID and Subsystem Device ID.
   3) Modify EcCrisis.
   4) Take off setupmenu's mouse.
   5) Implement Acer logo.
   6) Implement SLP1.0.
   7) Implement Relteak 8111c-GR PXE Rom.
   8) Judgment VGA Vendor then to check version and size.
   9) Check OS type in the ASL-side.
  10) Implement JMB38X Card Reader
  11) Create Verbtable interface and Modem SSID.
  12) Implement EC Acpi-Enable.
  13) Implement Wireless and Bluetooth detection.
  14) Implement MIR function.
  15) Combine ACER's SLP2.0.

EC:
  1) Num lock Led can't be on/off.
  2) Keep GPIO EC_DOCKIN normal High.
  3) Change the brightness table to common JAL91.
  4) Open the sequence of dockin.
  5) Open key board wake up from S3 function.

+==============================================================================+
|   MODEL NO. :  JAT10                                RELEASE DATE : 11/10/07  |
|------------------------------------------------------------------------------|
|   Major Version      : V0.01T01                                              |
|   KBC BIOS Version   : V0.01T01                                              |
|   VGA BIOS           :                                                       |
|   Kernel Version     : 1016                                                  |
|   Flash Utility Ver  :                                                       |
|   Phase Status       : A Build                                               |
|   Clock Generator    : 01h,85h,ech,3dh,ffh,7Eh,02h,11h,50h,C5h,7dh           |
|   Checksum (FD)      : 90A2h                                                 |
+==============================================================================+
BIOS:
  1) Setup compiler environment.
  2) Modify GPIO Table.
  3) Modify Clock Generator.
  4) Implement Acer Int15 function.
  5) Take off setupmenu's mouse.
  6) Implement Oem Acpi Information.      
  7) Implement Acer Boot menu function.
  8) Implement OemPost Function.
  9) Implement Acer logo.
  10) Implement ODM function.
  11) Implement PasswordBackdoor.
  12) Implement WMI.
  13) Implement SLP1.0.
  14) Implement SLP2.0.
  15) Implement Relteak 8111c-GR PXE Rom.
  16) Implement PostDisplayDevice.
  17) Implement Setup Menu.
  
EC:
  1) Modify GPIO definition.
  2) Modify Power Sequence.
  3) Fan full on enable.     
  4) Implement SW Parameter V0.3.                   
  5) Watch dog function disable.                     
  6) Turn off Acer BatteryID check function.                    
  7) Turn On DVR function.                    
  8) Implement US & UK matrix table and Japan is follow US table.
  9) Turn off IndexIO function.
  10)AP who want to use IndexIO function, please use 68/6C instead.