+==============================================================================+
BIOS CORE Version ................  Insyde BIOS
CPUs Supported    ................  Dothan / Banias / Celeron-M
Chipset		  ................  Intel 855GME+
Bridge		  ................  ICH4-M
Super I/O	  ................  SMC217
PCMCIA		  ................  ENE CB-1420 Cardbus controller
Video		  ................  ATI M11 (FL322) Intel 855GME+(FL324)
On-board Audio    ................  RealTek ALC202A AC'97 Audio
On-board LAN      ................  Broadcom BCM4401/BCM5788
KBC		  ................  ENE 910
1394 controller	  ................  TI TSB43AB22
+==============================================================================+
+==============================================================================+
| MODEL NO. :  DFL324                              RELEASE DATE : 04/27/2004   |
|------------------------------------------------------------------------------|
|   Major Version     : 1.30                   CPU u-code Version:             |
|   KBC BIOS Version  : 1.30                    MU2069401 - Banias A1 stepping |
|   ATI M11 VGA BIOS  : VER008.011.001.102      M2069505 - Banias B1 stepping  |
|   ATI M9+X VGA BIOS :	VER008.017M.145.000     M206D109 - Dothan A1 stepping  |
|   855GME+ VGA BIOS  : 3104                    M206D210 - Dothan A2 stepping  |
|   Flash Utility Ver.: 0.20A                   M206D617 - Dothan B1 stepping  |
|   Checksum (ROM)    : 04B4h               	M8069545 - Banias Celeron B1   |
+==============================================================================+

SYS BIOS:

1.Add Dothan B1 stepping support

EC BIOS:

1.Implement power team solution for Notes issue CC095:
  (D2,3,4)Battery discharge to 0% at 0 degree chamber then plug in AC,
  battery LED will flash amber light.

+==============================================================================+
| MODEL NO. :  DFL324                              RELEASE DATE : 04/20/2004   |
|------------------------------------------------------------------------------|
|   Major Version     : 1.20                   CPU u-code Version:             |
|   KBC BIOS Version  : 1.20                    MU2069401 - Banias A1 stepping |
|   ATI VGA BIOS      :	VER008.011.001.102      MU2069505 - Banias B1 stepping |
|   855GME+ VGA BIOS  : 3104                    MU206D109 - Dothan A1 stepping |
|   Flash Utility Ver.: 0.20A          		MU206D210 - Dothan A2 stepping |
|   Checksum (ROM)    : 3C84h			MU8069545 - Banias Celeron B1  |
+==============================================================================+

SYS BIOS:

1. Fix D4 can't detect bluetooth after reboot

EC BIOS:

1. System wake up from s3 will auto-shutdown issue.

2. Pressing power button several times while system is entering hibernation,
   System will resume and power light will flash with amber light.

+==============================================================================+
| MODEL NO. :  DFL324   		           RELEASE DATE : 04/13/2004   |
|------------------------------------------------------------------------------|
|   Major Version     : 1.01                   CPU u-code Version:             |
|   KBC BIOS Version  : 1.01                    MU2069401 - Banias A1 stepping |
|   ATI VGA BIOS      :	VER008.011.001.102      MU2069505 - Banias B1 stepping |
|   855GME+ VGA BIOS  : 3104                    MU206D109 - Dothan A1 stepping |
|   Flash Utility Ver.: 0.20A          		MU206D210 - Dothan A2 stepping |
|   Checksum (ROM)    : 7320h			MU8069545 - Banias Celeron B1  |
+==============================================================================+

SYS BIOS:

1. Fix SKU 1,3,5 ATAPI model name exceed the frame of devices block in SCU.

2. Implement MAC address of uuid

3. fix Fn+ F5 no display issue

EC BIOS:

1. Notes issue CC113:The LCD auto dim disable function has no function.

2. Notes issue CC095:(D2,3,4)Battery discharge to 0% at 0 degree chamber then plug in AC, battery LED will flash amber light.

3. Remove function:When press stop button for 4 seconds,the IOMP will shut down.

4. Remove function:(IOMP mode)When battery capacity is lower than 10%, the system start to beep.

+==============================================================================+
| MODEL NO. :  DFL324 		                   RELEASE DATE : 04/05/2004   |
|------------------------------------------------------------------------------|
|   Major Version     : 1.00                   CPU u-code Version:             |
|   KBC BIOS Version  : 1.00                    MU2069401 - Banias A1 stepping |
|   ATI VGA BIOS      :	VER008.011.001.102      MU2069505 - Banias B1 stepping |
|   855GME+ VGA BIOS  : 3104                    MU206D109 - Dothan A1 stepping |
|   Flash Utility Ver.: 0.20A          		MU206D210 - Dothan A2 stepping |
|   Checksum (ROM)    : 388Eh			MU8069545 - Banias Celeron B1  |
+==============================================================================+

SYS BIOS:

1. Remove Setup item "USB Mass Storage"

2. Modify the position of memory block in SCU.

3. Fix SKU6 can't runing amidiag

4. Remove TV out Fn+ F5 feature

5. Make "Password on Boot" item grayly when don't set supervisor

6. Fix system will hang up after exit saving changes in SCU.

7. Fix sometimes can't enter IOMP.

8. Fix dmi utility can't write serial number

EC BIOS:

1. Notes issue CC001:(D2) The LCM screen should show " Aspire 2020" not " 2010".

2. Notes issue CC012:System sound will become small to max when disable
   mute function.

3. Notes issue CC077:When fully discharge with playing the DVD,the
   system can't boot into windows O.S.

4. Notes issue CC087:(IOMP mode)When battery capacity is lower than 10%, the system doesn't start to beep.

5. Notes issue CC089:(IOMP mode)When press stop button for 4 seconds,
   the IOMP can't shut down.

6. Notes issue CC095:Battery discharge to 0% at 0 degree chamber then
   plug in AC, battery LED will flash amber light.

7. Support command 0x45 data 0xE0 for system bios to disable blue tooth power.

8. Remove system wake up from S3 when Lid switch open.

+==============================================================================+
| MODEL NO. :  DFL324    		           RELEASE DATE : 03/30/2004   |
|------------------------------------------------------------------------------|
|   Major Version     : 0.09                   CPU u-code Version:             |
|   KBC BIOS Version  : 0.09                    MU2069401 - Banias A1 stepping |
|   ATI VGA BIOS      :	VER008.011.001.102      MU2069505 - Banias B1 stepping |
|   855GME+ VGA BIOS  : 3104                    MU206D109 - Dothan A1 stepping |
|   Flash Utility Ver.: 0.20A          		MU206D210 - Dothan A2 stepping |
|   Checksum (ROM)    : C73Bh			MU8069545 - Banias Celeron B1  |
+==============================================================================+

SYS BIOS:

1. Fix wrong product name in SCU

2. Modify the position of memory block in SCU

3. Remove APIC item in SCU

4. Disable VGA rotation for HCT test hang up

5. Chage the delay of cdrom bootting from 100 ms to 200 ms

6. Remove TV out Fn+ F5 feature

7. Notify OS switch back to Windows screen out of S4

EC BIOS:

1. Modify Number Lock function to for new ABO SPEC.

2. Modify sub-woofer key equal Fn key in Drogo-3 and Drogo-4.

3. Implement System wake up from S3 when Lid switch open.

4. Modify LCM default word "Aspire 2020"

+==============================================================================+
| MODEL NO. :  DFL324 		                   RELEASE DATE : 03/23/2004   |
|------------------------------------------------------------------------------|
|   Major Version     : 0.08                   CPU u-code Version:             |
|   KBC BIOS Version  : 0.08                    MU2069401 - Banias A1 stepping |
|   ATI VGA BIOS      :	VER008.011.001.102      MU2069505 - Banias B1 stepping |
|   855GME+ VGA BIOS  : 3104                    MU206D109 - Dothan A1 stepping |
|   Flash Utility Ver.: 0.20A          		MU206D210 - Dothan A2 stepping |
|   Checksum (ROM)    : A411h			MU8069545 - Banias Celeron B1  |
|   FLASHIT XXXX.ROM /ALLB                                                     |
+==============================================================================+

SYS BIOS:

1. Update the product name in DMI and SCU STRING

2. Change the position of "Password on Boot" in SCU

3. Fix reboot & S3 issue

EC BIOS:

1. Notes issue BC033:In the dos mode the keyboard founction is abnormal.

2. It is for SM_BUS1 sometime will be lock when plug battery SMB reading tooling
   Due to SMB1 map to SCL1/SDA1 and SCL2/SDA2 in Reg"SMBPIN",just monitor SMB1

3. Fixed ESCD shutdown issue.

4. Alt+Ctrl+Del(warm boot) casue Alt key lock.

5. ALT+CTRL+DEL warmboot in DOS cause CTRL key lock.

6. EC_ON assert low and System shutdown when plug-out AC after BIOS flash restart.

7. IKB timeout cause firmware scan code send to Host incompletely.

+==============================================================================+
| MODEL NO. :  DFL324    		           RELEASE DATE : 03/17/2004   |
|------------------------------------------------------------------------------|
|   Major Version     : 0.07                   CPU u-code Version:             |
|   KBC BIOS Version  : 0.07                    MU2069401 - Banias A1 stepping |
|   ATI VGA BIOS      :	VER008.011.001.102      MU2069505 - Banias B1 stepping |
|   855GME+ VGA BIOS  : 3104                    MU206D109 - Dothan A1 stepping |
|   Flash Utility Ver.: 0.20A          		MU206D210 - Dothan A2 stepping |
|   Checksum (ROM)    : BF15h			MU8069545 - Banias Celeron B1  |
|   FLASHIT XXXX.ROM /ALLB                                                     |
+==============================================================================+

SYS BIOS:

1. Int 15 ax9610 bl=35 WLAN function
          ax9610 bl=10 UMA panel type = 1028x800
          ax9610 bl=36 VGA type
          ax9610 bl=12 Project Name

2. Remove TV out function of Fn+F5

3. Modify biglogo & osb for sw spec definition

4. Add Celeron M osb support

5. change the VGA mbi files, for modify the Reboot fail issue

6. change the copyright declear from "1983 - 2002" to "1983 - 2004"

7. Exchange the position of "Set User password" & "Set Supervisor password" in SCU.

EC BIOS:

1. Notes issue BC135:Press power switch "more then 2 times" to power on system,
   system will hang on. (LCD no display, power LED is on)

2. Notes issue BC139:(D2) When disable the low battery sound alarm ,
   the sound alarm still can be heard.

3. Delay 300ms when SPB and SWI wake up from S3.

+==============================================================================+
| MODEL NO. :  DFL324 		                   RELEASE DATE : 03/11/2004   |
|------------------------------------------------------------------------------|
|   Major Version     : 0.06                   CPU u-code Version:             |
|   KBC BIOS Version  : 0.06                    MU2069401 - Banias A1 stepping |
|   ATI VGA BIOS      :	VER008.011.001.102      MU2069505 - Banias B1 stepping |
|   855GME+ VGA BIOS  : 3104                    MU206D109 - Dothan A1 stepping |
|   Flash Utility Ver.: 0.20A          		MU206D210 - Dothan A2 stepping |
|   Checksum (ROM)    : 4D4Dh			MU8069545 - Banias Celeron B1  |
|   FLASHIT XXXX.ROM /C   (cmos update)                                        |
+==============================================================================+

SYS BIOS:

1. fix any key wake up faile when getting into S3 and keyboard pressing down

2. FIR disable funtion fault

3. Change USB mass storage boot default to Disable.

4. Implement subbrand detection function of acer oem int 15

5. Add centrino logo support

EC BIOS:

1. Modify hot key Fn+F8 for H/W team to fix noise and volumn issue.

2. Support CMD 0x45 DAT 0xF0 for Launch Manager to know the project ID.

+==============================================================================+
| MODEL NO. :  DFL324 		                   RELEASE DATE : 03/03/2004   |
|------------------------------------------------------------------------------|
|   Major Version     : 0.05                   CPU u-code Version:             |
|   KBC BIOS Version  : 0.05                    MU2069401 - Banias A1 stepping |
|   ATI VGA BIOS      :	VER008.011.001.102      MU2069505 - Banias B1 stepping |
|   855GME+ VGA BIOS  : 3104                    MU206D109 - Dothan A1 stepping |
|   Flash Utility Ver.: 0.20A          		MU206D210 - Dothan A2 stepping |
|   Checksum (ROM)    : F7CDh			MU8069545 - Banias Celeron B1  |
+==============================================================================+

SYS BIOS:

1. Fix the Quiet boot setting up in cmos default

2. modify the title "Quite" to "Quiet" in scu menu

3. Add PNP IDs for touch pad.

4. Fix the sequence of boot in cmos default

5. Fix TV out Fn+ F5 can't work

EC BIOS:

1. Notes issue BC043,BC078: Sub-woofer on/off function can not be control by hot key.
   Solution: At the beginning, the drongo type is defined by board ID, it will be defined by project ID now.

2. Notes issue BC074:Power LED always flashing with amber color.
   Solution: Don't store the flash flag into EEPROM.

3. H/W team require: When power off system or entry suspend, the MUTE_WOOFER# pin will active at the first.

4. Implement battery parameter item 9.

5. SW team require: When cover switch be Opened, EC doesn't sent out event to system bios for fixing notes issue BC092.

+==============================================================================+
| MODEL NO. :  DFL324 		                   RELEASE DATE : 02/25/2004   |
|------------------------------------------------------------------------------|
|   Major Version     : 0.04                    CPU u-code Version:            |
|   KBC BIOS Version  : 0.04                    MU2069401 - Banias A1 stepping |
|   ATI VGA BIOS      :	VER008.011.001.102      MU2069505 - Banias B1 stepping |
|   855GME+ VGA BIOS  : 3104                    MU206D109 - Dothan A1 stepping |
|   Flash Utility Ver.: 0.20A          		MU206D210 - Dothan A2 stepping |
|   Checksum (ROM)    : 720Dh			MU8069545 - Banias Celeron B1  |
+==============================================================================+

SYS BIOS:

1. Fix 1394 can't connect other NB after S3 resume

2. Change enable/disable key from "enter" to "space" in SCU

3. Enable L2 cahe size 2M for Dothan CPU (reduce memory thermal)

4. Support thermal utility 2.0

5. Support PXE lan boot

6. add Intel wireless b+g in ACER Int15 wireless function

EC BIOS:

1. Note issue AC057:[D3,D4]The system does not show "No support Sub-woofer" when perssed hot key of Sub-woofer.

2. Note issue AC011:(Drongo2&3&4)The SUSP LED(amber color) will keep flashing when system is at idle status.

3. Note issue AC037:(Drong 2)The Audio button founction appears abnormal.

4. H/w change the voltage of board id.

+==============================================================================+
| MODEL NO. :  DFL324    		           RELEASE DATE : 02/18/2004   |
|------------------------------------------------------------------------------|
|   Major Version     : 0.03                    CPU u-code Version:            |
|   KBC BIOS Version  : 0.03                    MU2069101 - Banias A1 stepping |
|   ATI VGA BIOS      :	XXXX        		MU2069402 - Banias B0 stepping |
|   855GME+ VGA BIOS  : 3104                    MU2069505 - Banias B1 stepping |
|   Flash Utility Ver.: 0.20A          		MU206D006 - Dothan A0          |
|   Checksum (ROM)    : 4FD2h			MU206D109 - Dothan A1          |
+==============================================================================+

SYS BIOS:

DFL32-031 [MK006] Add Intel wireless b+g card

DFL32-029 [MK005] modify UMA vga ROM, enable the 1280* 800, TV out

DFL32-026 [JH015] Fix thermal utility can't run

DFL32-025 [JH014] Fix power status display abnormally when AC IN/OUT on power
                  meter & right_down screen.

DFL32-024 [JH013] Add "USB Mass Storage" item for enable/disabl the function on
                  SCU.

DFL32-023 [IS004] Add usb mass storage boot function

DFL32-021 [JH012] Modify project ID

EC BIOS:

1. Note issue AC036:The definition of the one touch button on power board is different from Launch Manager.
   Solution:EC code swap the two buttons.

2. Support scan code for driver to show message about no sub-woofer.

3. Implement battery parameter except item 9 and 2.2

+==============================================================================+
| MODEL NO. :  DFL324 		                   RELEASE DATE : 02/11/2004   |
|------------------------------------------------------------------------------|
|   Major Version     : 0.02                    CPU u-code Version:            |
|   KBC BIOS Version  : 0.02                    MU2069101 - Banias A1 stepping |
|   ATI VGA BIOS      :	XXXX        		MU2069402 - Banias B0 stepping |
|   855GME+ VGA BIOS  : 3104                    MU2069505 - Banias B1 stepping |
|   Flash Utility Ver.: 0.20A          		MU206D006 - Dothan A0          |
|   Checksum (ROM)    : 85B0h			MU206D109 - Dothan A1          |
+==============================================================================+

SYS BIOS:

DFL32-020 [JH011] Fix HotKey(Fn+F7) can't enable/disable touchpad

DFL32-019 [JH010] Add thermal utility support

DFL32-018 [Mk004] Add CPU C4 support CST

EC BIOS:

1. After the KB910Q B4 chip is being powered on,the DPLL is default to be disabled.
   The fireware should enable the internal DPLL after 3 seconds after power-on.

2. H/W change power sequence:
   When SUSP# pin is high,VR_ON pin will high after 20ms.

+==============================================================================+
| MODEL NO. :  DFL324 		                   RELEASE DATE : 02/05/2004   |
|------------------------------------------------------------------------------|
|   Major Version     : 0.01                    CPU u-code Version:            |
|   KBC BIOS Version  : 0.01                    MU2069101 - Banias A1 stepping |
|   ATI VGA BIOS      :	XXXX        		MU2069402 - Banias B0 stepping |
|   855GME+ VGA BIOS  : 3104                    MU2069505 - Banias B1 stepping |
|   Flash Utility Ver.: 0.19A          		MU206D006 - Dothan A0          |
|   Checksum (ROM)    : 31E8h			MU206D109 - Dothan A1          |
+==============================================================================+

SYS BIOS:

DFL32-010 [MK002] modify UMA vga ROM, enable the EDID 1680*1050 , 1280*800

DFL32-006 [JH003] Fix that COM, LPT & FIR disappear in WinXP

DFL32-005 [JH002] Add IEEE 1394 GUID initializtion

DFL32-004 [JH001] Add ssid

DFL32-003 [JS002] Add Winbond 39L040 512KB ROM Part.

EC BIOS:

1. Fix power,e_main... LED can't turn on.
2. H/W team ask to swap dot_cs pin and dot_rs pin.

