BUILD LETTER
TITLE
   ATI Mobility M10/M9+ VGA driver for WinXP/Win2K  - WW -
PART NUMBER
   xxXxxxx
ISSUE DATE
   11/24/2003
BUILD DATE
   11/24/2003

PRODUCT DATA
   MEDIA TYPE   : HDD or CD-ROM
   LEVEL        : ENG
   SYSTEM LIST  : Gannet
   PACKAGE      : 7.96.9-031113a-012350C
   DATE STAMP   : 11/13/2003
   BUILD ID     : HAA03D1W
   CHECK SUM    : 0xF5507ED7 (CRC -L)
   VIRUS CHECK  : 11/24/2003 By Trend OfficeScan Pattern version 688 Engine version 6.810
MEDIA BASED UPON
   TITLE        : ATI Mobility M10 VGA driver for WinXP/Win2K  - WW -
   DATE STAMP   : 11/19/2003
   BUILD ID     : HAA02D0W

************************************************************
HOW TO INSTALL
************************************************************
1.Unzip the package files. 

2.Double click the SETUP.EXE to run install.

************************************************************
VERIFYING THE INSTALLATION OF THE SOFTWARE
************************************************************
1.  Click on the "My Computer" icon, then click on the
    "Control Panel" icon, and then click on the "System"
    icon.

2.  Select the "Hardware" tab and then click on the
    "Device Manager..." button.

3.  Select the "Display Adapters" icon. The ATI Graphics
    Driver should be listed. If not, the driver is not
    installed correctly. To check the version of the driver,
    refer to the section below.

************************************************************
 IDENTIFYING THE SOFTWARE VERSION NUMBER
************************************************************
1.  Open "Display" from "Control Panel".

2.  Select the "Settings" tab and then click on the
    "Advanced" button.

3.  Select the "Options" tab. The graphics driver version 
    should be listed following "Packaging Version".

************************************************************
  UNINSTALLING THE SOFTWARE
************************************************************
NOTE: This procedure assumes the above installation process
was successful. This uninstallation procedure is specific
only to the version of the driver and installation files
included in this package.

1.  Click on the "My Computer" icon, then click on the
    "Control Panel" icon, and then click on the 
    "Add or Remove Programs" icon.

2.  Select the "ATI-Software Uninstall Utility" item and then 
    click on the "Change/Remove" button.

3.  Select "OK" in pop-up "ATI-Software Uninstall Utility" 
    window.

4.  Click the "Yes" button to reboot.

************************************************************
HOW TO UNATTENDED INSTALL
************************************************************
1.  Click the start then choice of a RUN

2.  Select the correct vga driver path then type in SETUP -K

************************************************************
THE HISTORY OF MODIFICATIONS:
************************************************************
-- HAA03D1W ------------------------------------------------------------------------------
(Problem)
   None.
(Reason)
   None.
(Solution)
   None.
-- HAA02D0W ------------------------------------------------------------------------------
(Problem)
   Hot key function can't work when overlay is playing.
(Reason)
   None.
(Solution)
   None.
-- HAA01D0W ------------------------------------------------------------------------------
First release for Gannet only.
(Problem)
   None.
(Reason)
   None.
(Solution)
   None.
-- HAG12D0W ------------------------------------------------------------------------------
(Problem)
   HA00657 error message appear  when play quakeIII arena.
   QA00604 display become lcd only after  resume from S3 set in extend mode
   HA00572 CRT is enable on Display Setting even w/o CRT connected
   HA00537 showing wrong display setting when set to LCD/TV only mode
   HA00527 XP/2K no display on TV only mode when changing resolutions & color depths
   HA00637 XP/2K no display on TV when switch DOS to fullscreen
   HA00636 blank display on TV when play games
   HA00584 cannot enable ext.desktop if TV is primary and LCD as secondary display
(Reason)
   None.
(Solution)
   None.
-- HAG11D0W ------------------------------------------------------------------------------
(Problem)
   QA00604 display become lcd only after  resume from S3 set in extend mode
   HA00572 CRT is enable on Display Setting even w/o CRT connected
   HA00537 showing wrong display setting when set to LCD/TV only mode
   HA00527 XP/2K no display on TV only mode when changing resolutions & color depths
   HA00637 XP/2K no display on TV when switch DOS to fullscreen
   HA00636 blank display on TV when play games
   HA00584 cannot enable ext.desktop if TV is primary and LCD as secondary display
(Reason)
   None.
(Solution)
   None.
-- HAG10D1W ------------------------------------------------------------------------------
Logoed driver.
(Problem)
   None.
(Reason)
   None.
(Solution)
   None.
-- HAG09D0W ------------------------------------------------------------------------------
(Problem)
   None.
(Reason)
   HA00599 extended desktop mode becomes both display mode when system restart.
   HA00785 extended desktop mode becomes both display mode when system restart.
(Solution)
   None.
-- HAG08D0W ------------------------------------------------------------------------------
(Problem)
   None.
(Reason)
   HA00599 extended desktop mode becomes both display mode when system restart.
   HA00785 extended desktop mode becomes both display mode when system restart.
(Solution)
   None.
-- HAG07D1W ------------------------------------------------------------------------------
Logoed driver.
(Problem)
   None.
(Reason)
   None.
(Solution)
   None.
-- HAG06D0W ------------------------------------------------------------------------------
(Problem)
   None.
(Reason)
   Release for Gannet use only.
(Solution)
   None.
-- HAG05D0W ------------------------------------------------------------------------------
(Problem)
   HA00599 extended desktop mode becomes both display mode when system restart (FR:100%).
(Reason)
   None.
(Solution)
   None.
-- HAG04D1W ------------------------------------------------------------------------------
Logoed driver.
(Problem)
   None.
(Reason)
   None.
(Solution)
   None.
-- HAG03D0W ------------------------------------------------------------------------------
(Problem)
   QA00416 LCT, XP+SP1, Error message when installing the VGA driver- HAG01C0W(100%)c
(Reason)
   None.
(Solution)
   None.
-- HAG02D0W ------------------------------------------------------------------------------
(Problem)
   HA00173 lct, xp, The font will be changed after resuming from monitor off by timer.
   HA00225 no display on video playback when move pointer during extended desktop mode
(Reason)
   None.
(Solution)
   None.
-- HAG01C0W ------------------------------------------------------------------------------
First release.
(Problem)
   None.
(Reason)
   None.
(Solution)
   None.
==================================== End of Letter =======================================