****************** BY23 Godlen BIOS  *****************************************
BY23 BIOS Golden BIOS Release Notification

*File name : BY23190A.ROM                                           06/14/2002
*system bios version : 1.90A.ROM
*Checksum  : A162

   SYStem BIOS  Notification:
        1. Update Thermal Point.
       



BY23 570BIOS release (Rev. 1.90K)			           06/14/2002

*File name : BY23190K.ROM
*Checksum  : 4480

           Base on BY23 BIOS 1.80K version

    Fixed:
    1.Change Thermal Point 
      H/W Throttling Off: from 65 to 72
      H/W Throttling On : from 73 to 80
      EC shutdown Protect: from 77 to 85

    2.Change EC BIOS version.


    not ready function & issue:

Modified:
Add function:


****************** BY23 Godlen BIOS  *****************************************
BY23 BIOS Golden BIOS Release Notification

*File name : BY23180A.ROM                                           05/24/2002
*system bios version : 1.80A.ROM
*Checksum  : B52C

   SYStem BIOS  Notification:
        1. Implement New feature for Customer Logo update.Need to use G3VA02.BIN or later.
       
        2. Update flash bin file from version 0.01 to version 0.02 (G3VA02.BIN).
                Change BIOS flash procedure as below:

                 1. Please put the files that as below list to the same folder.
                        . Phlash.exe            ---> Phlash file
                        . ALL.ROM               ---> BIOS ROM file
                        . LOGO.ROM              ---> Customer BOOT Logo file limit size less 16K byte

                 2. The Phlash parameter is the same before.



BY23 570BIOS release (Rev. 1.80K)			           05/24/2002

*File name : BY23180K.ROM
*Checksum  : 4480

           Base on BY23 BIOS 1.70K version

    Fixed:
    1. Change EC BIOS version.

    not ready function & issue:

Modified:
Add function:

****************** BY23 Godlen BIOS  *****************************************
BY23 BIOS Golden BIOS Release Notification

*File name : BY23170A.ROM                                           04/12/2002
*system bios version : 1.70A.ROM
*Checksum  : 3F0D

   SYStem BIOS  Notification:

	1. Covered the Windows XP hang up issue when plug in 3COM
	   AirConnect(Model CRWE737A).
        2. Implemant new customer Logo.
	3. Fixed address F000:FA50 of BDA to write SLP.
	4. Update Lan Option ROM ver1.22.Fixed that often disconnect 
           while transfer data by LAN.

BY23 570BIOS release (Rev. 1.70K)			           04/12/2002

*File name : BY23170K.ROM
*Checksum  : 4480

           Base on BY23 BIOS 1.60K version

    Fixed:
    1. Change EC BIOS version.

    not ready function & issue:

Modified:
Add function:



****************** BY23 Godlen BIOS  *****************************************
BY23 BIOS Golden BIOS Release Notification

*File name : BY23160A.ROM                                           02/21/2002
*system bios version : 1.60A.ROM
*Checksum  : 06DE

   SYStem BIOS  Notification:

	1. Base on By23 1.50A modify.
        2. Fix LG 15" Panel garbage problem.

BY23 570BIOS release (Rev. 1.60K)			           02/21/2002

*File name : BY23160K.ROM
*Checksum  : 4480

           Base on BY23 BIOS 1.50K version

    Fixed:
    1. Change EC BIOS version.

    not ready function & issue:


Modified:
Add function:

****************** BY23 Godlen BIOS  *****************************************
BY23 BIOS Golden BIOS Release Notification

*File name : BY23150A.ROM                                           02/06/2002
*system bios version : 1.50A.ROM
*Checksum  : BA48

   SYStem BIOS  Notification:

	1. Base on By23 1.40A modify.
	2. Updata VGA BIOS and change PanelID for fixed LG15" garbage.

BY23 570BIOS release (Rev. 1.50K)			           02/06/2002

*File name : BY23150K.ROM
*Checksum  : 4480

           Base on BY23 BIOS 1.40K version

    Fixed:
    1. Change EC BIOS version.

    not ready function & issue:


Modified:
Add function:

****************** BY23 Godlen BIOS  *****************************************
BY23 BIOS Golden BIOS Release Notification

*File name : BY23140A.ROM                                           01/11/2002
*system bios version : 1.40A.ROM
*Checksum  : 6CFA

   SYStem BIOS  Notification:

	1. Base on By23 1.30A modify.
	2. Change ABO Aspire Boot Logo to color screen.
        3. Modify "Aspire" BIOS Lock string the same "Travel Mate" is "AcerSystem"

BY23 570BIOS release (Rev. 1.10K)			           01/11/2002

*File name : BY23140K.ROM
*Checksum  : 4480

           Base on BY23 BIOS 1.30K version

    Fixed:
    1. Change EC BIOS version.

    not ready function & issue:


Modified:
Add function:


****************** BY23 Godlen BIOS  *****************************************
BY23 BIOS Golden BIOS Release Notification

*File name : BY23130A.ROM                                           12/12/2001
*system bios version : 1.30A.ROM
*Checksum  : AF4F

   SYStem BIOS  Notification:

	1. Base on Cy23 1.20A modify.
	2. Addition New Logo for customer requirement.


BY23 570BIOS release (Rev. 1.30K)			         12/12/2001

*File name : BY23130K.ROM
*Checksum  : 4480

           Base on CY23 BIOS 1.20K version

    Fixed:
	1. Reserve Fn+Esc send scancode for Dritek Driver.
        2. Create new command support ec bios develop tools.
        3. Create new waiting mode support develop tools.

****************** CY23 Godlen BIOS  *****************************************
CY23 BIOS Golden BIOS Release Notification

*File name : CY23120A.ROM                                           11/14/2001
*system bios version : 1.20A.ROM
*Checksum  : 7242

   SYStem BIOS  Notification:

	1. Base on Cy23 1.10A modify.
	2. Check BIOS system ID for custum's opinion.
	3. Some machine boot fail to fix.
	   


CY23 570BIOS release (Rev. 1.20K)			         11/14/2001

*File name : CY23120K.ROM
*Checksum  : CB80

           Base on CY23 BIOS 1.10K version

    Fixed:
	1. Fix change brightness too late when power on.



************************************************************************
*File name : CY23110A.ROM                                           11/01/2001
*system bios version : 1.10A.ROM
*Checksum  : FA92

   SYStem BIOS  Notification:

        1. Base on CY23 1.00A modify.
        2. Implement New VGA BIOS Rev 16 Tw17.
        3. Implement New Panel type 8 to HITACHI 14".
        4. Implement new SIEMENS requirement address F000:FFC0 "CY23"
        5. Implement Fast Boot Microsoft MDA spec(POST less 10 second).
        6. Fixed initial fail, when use 3COM PCMCIA Lan card at DOS driver.
        7. Fixed Tualatin Celeon CPU sigon show PIII.
        8. Fixed SYSTEM Boot fail when change setup menu [installed OS] set to "Only Win NT4.0".
        9. Re addition TV out Fn+F5 HotKey function.
        10. Fixed the print port has "!" mark in Win Me when set Bi-direct mode at setup menu.

    Note:1.Please loaded default for cmos after flash.
         2.*******Please use the 60W adapter when insert battery.*****

    not ready function & issue:


CY23 570BIOS release (Rev. 1.10K)			         11/01/2001

*File name : CY23110K.ROM
*Checksum  : 6EFF

           Base on CY23 BIOS 1.00K version

    Fixed:
    1. Change EC BIOS version.

    not ready function & issue:


Modified:
Add function:
****************** CY23 Godlen BIOS  *****************************************
CY23 BIOS Golden BIOS Release Notification

*File name : CY23100A.ROM                                           10/09/2001
*system bios version : 1.00A.ROM
*Checksum  : 97A0

   SYStem BIOS  Notification:

        1. Base on CY23 0.03A modify.
        2. Support New customer ID.
        3. Remove TV out Fn+F5 function.

    Note:1.Please loaded default for cmos after flash.
         2.*******Please use the 60W adapter when insert battery.*****

    not ready function & issue:


CY23 570BIOS release (Rev. 1.00K)			         10/09/2001

*File name : CY23100K.ROM
*Checksum  : 3752

           Base on CY23 BIOS 0.03K version

    Fixed:
    1. Change EC BIOS version.

    not ready function & issue:


Modified:
Add function:
****************** CY23 Godlen BIOS  *****************************************
CY23 BIOS Golden BIOS Release Notification

*File name : CY23003A.ROM                                           10/04/2001
*system bios version : 0.03A.ROM
*Checksum  : F69C

   SYStem BIOS  Notification:

        1. Base on CY23 0.02A modify.
        2. [CC004] Fix Post Message change color.
        3. [CC017] Fix PCMCIA icon active when no insert any PCMCIA card.
        4. [CC027] Fix Win XP Power Meter different battery capacity.
        5. [CC012] Fix press "F2" hang up when post.
        6. [CC029] Fix Fast resume time is over Spec (5 second).
        7. [CC036] Fix Cann't enter BIOS setup menu again by press "F2" when disable FDD Control.
        8. [CC039] Fix Lpt & Fdc still can be use in windows when Disable on Setup Menu.
        9. Change Spec for Only siemens(please change Siemens Logo) . Boot sequece from Fdd/Hdd/CD to Fdd/CD/Hdd.

    Note:1.Please loaded default for cmos after flash.
         2.*******Please use the 60W adapter when insert battery.*****

    not ready function & issue:


CY23 570BIOS release (Rev. 0.03K)			         10/04/2001

*File name : CY23003K.ROM
*Checksum  : 6F33

           Base on CY23 BIOS 0.02K version

    Fixed:
    1. Change EC BIOS version.

    not ready function & issue:


Modified:
Add function:
****************** CY23 Godlen BIOS  *****************************************
CY23 BIOS Golden BIOS Release Notification

*File name : CY23002A.ROM                                           09/19/2001
*system bios version : 0.02A.ROM
*Checksum  : F53A

   SYStem BIOS  Notification:

        1. Base on 30N3 1.50A modify.
        2. Implement Stick Key function.(Switch in Setup Menu).
        3. Implement PXE function.
        4. Implement F12 Boot from Lan.
        5. Remove DMI type 31 for PXE need.
        6. Implement Tualatin CPU A0/A1 steping.
        7. Remove EEPROM support for DMI type 1 product/version/serial.
                A. It need to use flash bios when you want to modify DMI string.
        8. Implement Multi boot Logo select. (need utility to select)
                A.COMPAL (Phoenix Logo)
                B.SIEMENS
                  1).Siemens Boot Logo & Compal SVID/SDID (14C0.0012)
                  2).Siemens Boot Logo & Siemens SVID/SDID(10CF.10CF)

                C.ACER
                  1).Acer Boot Logo & Compal SVID/SDID(14c0.0012)
                  2).Acer Boot Logo & Acer SVID/SDID(1025.0016)

        9. Implement "AcerSystem" string in F000:FA00.(for ACER)
        10.Implement "FSC System" string in F000:FFB0.(for SIEMENS)
        11.Fix VIA 686B device IDE/PMU/USB  to correct SVID/SDID
        12.Implement VRAM Size auto detect in setup menu load default.
                A. When Main memory over 128 MB and Load default to 32MB.(Only SIEMENS support).
        13.Implement ACER Lock function core for Int 15 spec.(for ACER spec tool)

    Note:1.Please loaded default for cmos after flash.
         2.*******Please use the 60W adapter when insert battery.*****

    not ready function & issue:


CY23 570BIOS release (Rev. 0.02K)			         08/31/2001

*File name : CY23002K.ROM
*Checksum  : 6F32

           Base on 30N3 BIOS 1.50K version

    Fixed:
    1. Change EC BIOS version.
    2. Change Project ID from 81 to 82.
    3. Implement Stick Key function
        a. Create EC name space for Stick key switch.
    4. Fix Flash BIOS slow. (H/W throttle disable)
    5. Remove Dummy Battery learning function.

    not ready function & issue:


Modified:
Add function:
****************** 30N3 Godlen BIOS  *****************************************
30N3 BIOS Golden BIOS Release Notification

*File name : 30N3150A.ROM                                           08/31/2001
*system bios version : 1.50A.ROM
*Checksum  : B1E3

   SYStem BIOS  Notification:

        1. Base on 1.40A modify.
        2. Upgread VGA BIOS to 6.12. 13 --> fix some problem
           a. Fix North Brige over an temp the TV Out fail(flash problem).
           b. Fix Hannstart 14' panel issue.
           c. Fix TV Out plug in first have garbage.
        3. Remove Mutil Boot III setup menu a item in HardDriver (Add one Card select).
        4. Set system UUID from Lan MAC address.
        5. Fix W2K VGA driver can't install.
        6. Implement Wake On USB from S1 for WinXP support.

    Note:1.Please loaded default for cmos after flash.
         2.*******Please use the 60W adapter when insert battery.*****

    not ready function & issue:


N30N3 570BIOS release (Rev. 1.50K)			         08/31/2001

*File name : 30N3150K.ROM
*Checksum  : 2880

           Base on 1.40K version

    Fixed:
    1.Change Thermal Point define for Celeon 1.2 GHz
      Fan Off           : from 45 to 48
      Fan On 4.0V       : 54
      Fan On 4.5V       : 58
      Fan On 5.0V       : 64
      H/W Throttling Off: from 60 to 65
      H/W Throttling On : from 67 to 73
      EC shutdown Protect: from 70 to 77

    2.Change EC BIOS version.

    not ready function & issue:


Modified:
Add function:


****************** 30N3 Godlen BIOS  *****************************************
30N3 BIOS Golden BIOS Release Notification

*File name : 30N3140A.ROM                                           08/13/2001
*system bios version : 1.40A.ROM
*Checksum  : C749

   SYStem BIOS  Notification:

        1. Base on 1.30A modify.

    Note:1.Please loaded default for cmos after flash.
         2.*******Please use the 60W adapter when insert battery.*****

    not ready function & issue:


N51N2 570BIOS release (Rev. 1.40K)			         08/13/2001

*File name : 30N3140K.ROM
*Checksum  : 285C

           Base on 1.30K version

    Fixed:
    1. Modfy LG panel bringness Level.
    not ready function & issue:


Modified:
Add function:

****************** 30N3 Godlen BIOS  *****************************************
30N3 BIOS Golden BIOS Release Notification

*File name : 30N3130A.ROM                                           08/03/2001
*system bios version : 1.30A.ROM
*Checksum  : C85D

   SYStem BIOS  Notification:

        1. Base on 1.20A modify.( the 1.20A is eject)
        2. Upgrade VGA BIOS to 6.12.009 TEST 00 Fix TV out flash problem.

    Note:1.Please loaded default for cmos after flash.
         2.*******Please use the 60W adapter when insert battery.*****

    not ready function & issue:


N51N2 570BIOS release (Rev. 1.30K)			         08/03/2001

*File name : 30N3130K.ROM
*Checksum  : 2980

           Base on 1.20K version

    Fixed:
    not ready function & issue:


Modified:
Add function:

****************** 30N3 Godlen BIOS  *****************************************
30N3 BIOS Golden BIOS Release Notification

*File name : 30N3120A.ROM                                           07/27/2001
*system bios version : 1.20A.ROM
*Checksum  : 468B

   SYStem BIOS  Notification:

        1. Base on 1.10A modify.
        2. Fix Cover WinXP can't install issue(Enable USB Over Current function in this version)
        3. Creat New Interface to test driver(do't need to test).
        4. Upgrade VGA BIOS to 6.12.007 TW08.
        5. Support CPT battery Manufacture.

    Note:1.Please loaded default for cmos after flash.
         2.*******Please use the 60W adapter when insert battery.*****

    not ready function & issue:


N51N2 570BIOS release (Rev. 1.20K)			         07/27/2001

*File name : 30N3120K.ROM
*Checksum  : 4C80

           Base on 1.10K version

    Fixed:
        1. Support KOREA key  --> select to US keyboard.
        2. Support CPT battery.
    not ready function & issue:


Modified:
Add function:

****************** 30N3 Godlen BIOS  *****************************************
30N3 BIOS Golden BIOS Release Notification

*File name : 30N3110A.ROM                                           06/27/2001
*system bios version : 1.10A.ROM
*Checksum  : 2980

   SYStem BIOS  Notification:

        1. Base on 1.00A modify.
        2. Modify Default VRAM size from 8MB to 16MB.
        3. Cover WinXP can't install issue.(Disabl USB Over Current feature)
        4. Upgrade UDMA 100 function.(30N3 spec not support. This is a backup solution for Test)
        5. Upgrade VGA BIOS to 6.12.005 TW06.
        6. Disable USB wake up function.

    Note:1.Please loaded default for cmos after flash.
         2.*******Please use the 60W adapter when insert battery.*****

    not ready function & issue:


N51N2 570BIOS release (Rev. 1.10K)			         06/27/2001

*File name : 30N3110K.ROM
*Checksum  : 3D80

           Base on 1.00K version

    Fixed:
    not ready function & issue:


Modified:
Add function:

****************** 30N3 Godlen BIOS  *****************************************
30N3 BIOS Golden BIOS Release Notification

*File name : 30N3100A.ROM                                           06/19/2001
*system bios version : 1.00A.ROM
*Checksum  : 331C

   SYStem BIOS  Notification:

        1. Base on 0.13A modify.

    Note:1.Please loaded default for cmos after flash.
         2.*******Please use the 60W adapter when insert battery.*****

    not ready function & issue:


N51N2 570BIOS release (Rev. 1.00K)			         06/19/2001

*File name : 30N3100K.ROM
*Checksum  : 3D80

           Base on 0.13K version

    Fixed:
    not ready function & issue:


Modified:
Add function:

**************************************************************************
30N3 BIOS Release Notification

*File name : 30N3013A.ROM                                           06/19/2001
*system bios version : 0.13A.ROM
*Checksum  : 0BEE

   SYStem BIOS  Notification:

        1. Base on 0.12A modify.
        2. Back VGA BIOS to ver 6.12.04
           a.Reopen <CC016> the screen is getting lighter before initialling OS.
        3. Remove cover LLB under 2% can't resume.
        4. Fix W2K timeout can't into Hibernate after standby timeout.
        5. Fix W2K can be wake by Lid when Standby or Hibernate.
        6. Got a soultion for parity check 2.(Please recheck again.)
        7. Fix W2K Some time system can't into Hibernate and PCMCIA LED on.


    Note:1.Please loaded default for cmos after flash.
         2.*******Please use the 60W adapter when insert battery.*****

    not ready function & issue:


N51N2 570BIOS release (Rev. 0.13K)			         06/19/2001

*File name : 30N3013K.ROM
*Checksum  : 4780

           Base on 0.12K version

    Fixed:
        1. Change Fan On thermal point
           Fan ON 4V:   54  ----> Set 5V Fan ON 2 second first.
           Fan ON 4.5:  58
           Fan ON 5V:   64
        2. Fix Battery Stop charge when battery full and replug in AC.


    not ready function & issue:


Modified:
Add function:

**************************************************************************
30N3 BIOS Release Notification

*File name : 30N3012A.ROM                                           06/15/2001
*system bios version : 0.12A.ROM
*Checksum  : 18B5

   SYStem BIOS  Notification:

        1. Base on 0.11A modify.
        2. Upgrade VGA BIOS to ver 6.12.05
           a.<CC016> Fix this issue.(the screen is getting lighter before initialling OS.)
        3. addition TV Out Hotkey function
                Fn+F5

         (1)     (2)     (3)      (4)      (5)  --> to (1)

                   CRT              CRT
        CRT -> Sim     -> TV -> Sim     -> LCD
                   LCD              TV
        4. When LLB is under 2% from EC occur and the system can't resume from standby.


    Note:1.Please loaded default for cmos after flash.
         2.*******Please use the 60W adapter when insert battery.*****

    not ready function & issue:


N51N2 570BIOS release (Rev. 0.12K)			         06/15/2001

*File name : 30N3012K.ROM
*Checksum  : 2F80

           Base on 0.11K version

    Fixed:
        1. Fix MailLed have tiny light when AC plug in.
        2. Change LLB event from battery gasgauge 5% to 2%.


    not ready function & issue:


Modified:
Add function:

**************************************************************************
30N3 BIOS Release Notification

*File name : 30N3011A.ROM                                           06/12/2001
*system bios version : 0.11A.ROM
*Checksum  : 0FF1

   SYStem BIOS  Notification:

        1. Base on 0.10.T01 modify.
        2. Create system watchdog function.
        3. Set Default AMP Volume without setup menu.
        4. Fix throttling enable noise.
        5. Fix LB and LLB post hang.
        6. Fix TV out default from PAL to NTSC mode.

    Note:1.Please loaded default for cmos after flash.
         2.*******Please use the 60W adapter when insert battery.*****

    not ready function & issue:


N51N2 570BIOS release (Rev. 0.11K)			        06/12/2001

*File name : 30N3011K.ROM
*Checksum  : 1A80

           Base on 0.10K.T01 version

    Fixed:

        1. Modify to Battery spec Ver 1.2 for power term release.
                <System charge suspendtion condition>
        	a. Trickle charge current portect > 0.3A  over 120 second.
	        b. Charge current register(0x14) portect != "0" over 120 second.
	        c. System portect current > 0.1A when Fastcharge pin disable and over 120 second.
        2. Modify Fan On 4V procedure.(first Level Fan On to 5 Voltage 2 second then to 4 Voltage.)
        3. Fn+B boot block function ready.(need flash Ec boot block).

    not ready function & issue:


Modified:
Add function:

**************************************************************************
30N3 BIOS Release Notification

*File name : 30N3010A.T01                                           06/08/2001
*system bios version : 0.10A.T01
*Checksum  : C8D8

   SYStem BIOS  Notification:

        1. Base on 0.09A modify.
        2. Upgrade VGA BIOS ver 0.5
        3. Disable NMI when into suspend(Cover partite check error 2 message issue)
           Please recheck this issue again.

    Note:1.Please loaded default for cmos after flash.
         2.*******Please use the 60W adapter when insert battery.*****

    not ready function & issue:


N51N2 570BIOS release (Rev. 0.10K)			        06/08/2001

*File name : 30N3010K.T01
*Checksum  : 9280

           Base on 0.09K version

    Fixed:

        1. Modify to Battery spec Ver 1.1 for power term release.
                <System charge suspendtion condition>
        	a. Trickle charge current portect > 0.3A  over 60 second.
	        b. Charge current register(0x14) portect != "0" over 60 second.
	        c. System portect current > 0.1A when Fastcharge pin disable.
        2.Addition new function can detect fan sensor. ( 30n3thm.exe utility for 30n3 only)
        3. Change Fan On point
        	b. Fan ON 5V --> from 60 to 58

    not ready function & issue:
        1.Fn + B from Boot block power on.


Modified:
Add function:

**************************************************************************
30N3 BIOS Release Notification

*File name : 30N3009A                                           06/01/2001
*system bios version : 0.09A
*Checksum  : 6DFE

   SYStem BIOS  Notification:

        **** 30N3 BIOS 0.08A will be reject ********
        **** 30N3 BIOS 0.08A.T01 will be reject ****
        (The two Version BIOS have occur HIMEM.SYS load fail issue.)

        1. Base on 0.08A modify.
        2. Addition BIOS Version Check in memory F000:E842 for factory.
        3. modify Acpidsdt.asl(ACPI TABLE) OEMID from VIA to COMPAL
        4. Modify Battery ID in ASL code from TOSHIBA to PANASONIC
        5. Upgrade VGA BIOS Version to 6.01.04
        6. Fix system hang for shutdown or standby when system thottling on.
        7. Creat new interface for Ext int 15
                a. change BOOT sequence.(F0)
                b. enable COM A port.(F1)
                c. Get H/W Panel ID.(F2)
                d. Get last time shutdown point.(F3)




    Note:1.Please loaded default for cmos after flash.
         2.*******Please use the 60W adapter when insert battery.*****

    not ready function & issue:


N51N2 570BIOS release (Rev. 0.09K)			        06/01/2001

*File name : 30N3009K
*Checksum  : DD80

           Base on 0.08K version

    Fixed:
        1. <New Function> Detect AC 45W --> When use 45W adapter the system
           will stop charge battery.
        2. <New Function> Smart Battery Error bit protection.
           When the Error bit is setting then system will stop charge battery.
        3. Stop Charge 2 second in Power ON.
           When system power on EC will stop charge battery 2 second.
        4. Bad cell timer count from 1 Hour to 2 Hours.
        5. Cover command FE hang issue.(Phdisk.exe can't reboot and HIMEM.SYS can't load)

    not ready function & issue:
        1.Fn + B from Boot block power on.


Modified:
Add function:

**************************************************************************
30N3 BIOS Release Notification

*File name : 30N3008A                                           05/31/2001
*system bios version : 0.08A
*Checksum  : 7B2C

   SYStem BIOS  Notification:

        1. Base on 0.08A.T01 modify.
        2. Upgrade VGA BIOS Version to 6.01.04

    Note:1.Please loaded default for cmos after flash.
         2.*******Please use the 60W adapter when insert battery.*****

    not ready function & issue:


N51N2 570BIOS release (Rev. 0.08K)			        05/31/2001

*File name : 30N3008K
*Checksum  : C980

            Base on 0.08K.T01 version

    Fixed:
        1. Modify system windows AC item glitter 2 second
           (When system power on EC will stop charge battery 2 second).

    not ready function & issue:
        1.Fn + B from Boot block power on.


Modified:
Add function:

**************************************************************************
30N3 BIOS Release Notification

*File name : 30N3008A.T01				            05/31/2001
*system bios version : 0.08A.T01
*Checksum  : 7B2C

   SYStem BIOS  Notification:

        1. Base on 0.07A modify.
        2. Addition BIOS Version Check in memory F000:E842 for factory.
        3. modify Acpidsdt.asl(ACPI TABLE) OEMID from VIA to COMPAL
        4. Fix Phdisk can't reboot problem.(Fix command FE fail)
        5. Modify Battery ID in ASL code from TOSHIBA to PANASONIC
        6. Upgrade VGA BIOS Version to 6.01.03.
        7. Fix system hang for shutdown or standby when system thottling on.
        8. Creat new interface for Ext int 15
                a. change BOOT sequence.(F0)
                b. enable COM A port.(F1)
                c. Get H/W Panel ID.(F2)
                d. Get last time shutdown point.(F3)

    Note:1.Please loaded default for cmos after flash.
         2.*******Please use the 60W adapter when insert battery.*****

    not ready function & issue:


N51N2 570BIOS release (Rev. 0.08K)			        05/31/2001

*File name : 30N3008K.T01
*Checksum  : C980

            Base on 0.07K version

    Fixed:
        1. <New Function> Detect AC 45W --> When use 45W adapter the system
           will stop charge battery.
        2. <New Function> Smart Battery Error bit protection.
           When the Error bit is setting then system will stop charge battery.
        3. Stop Charge 2 second in Power ON.
           When system power on EC will stop charge battery 2 second.
        4. Bad cell timer count from 1 Hour to 2 Hours.

    not ready function & issue:
        1.Fn + B from Boot block power on.


Modified:
Add function:

**************************************************************************
30N3 BIOS Release Notification

*File name : 30N3007A				            05/14/2001
*system bios version : 0.07A
*Checksum  : B01A

   SYStem BIOS  Notification:

        1.Base on 0.06A modify.
        2.Fix Some time press "C" key boot form CD will be hang.

    Note:1.Please loaded default for cmos after flash.
         2.*******Please use the 60W adapter when insert battery.*****

    not ready function & issue:


N51N2 570BIOS release (Rev. 0.07K)			        05/14/2001

*File name : 30N3007k.ROM
*Checksum  : 1C80

            Base on 0.06K version

    Fixed:
        1. Fastcharge timer count time from 4 Hour to 8 Hour.
        2. Badcell timer count time from 5 Hour to 1 Hour.
        3. When Lid Close and the User Button press 1 second Power On function Disable.


    not ready function & issue:
        3.Fn + B from Boot block power on.


Modified:
Add function:

**************************************************************************
30N3 BIOS Release Notification

*File name : 30N3006A				            05/11/2001
*system bios version : 0.06A
*Checksum  : 92DB

   SYStem BIOS  Notification:

        1.Base on 0.05A modify.
        2.addition new panel ID of 15"
        3.updata VGA BIOS 6.01.02 test version.
           a. Fix TV change fail issue
        4.Fix Direct CD player change to AP or CD mode and can't boot first time issue.
        5.Fix the function work when Press Direct CD User Button for resume issue.
        6.Fix Car Bus "R2" card S3 resume fail in W2K (need install AGP driver can fixed it)
        7.Fix HCT test of the ACPILID can't pass problem.
        8.Fix HCT test of the ACPISMB can't pass problem.
        9.Fix system hang in post logo when press "F2" into setup menu.
        10.Disable Fn+F4 Beep volume adjust function.
        11.Cover Close Beep function ready.
        12.Fix LCD Display Stretch Fail issue.

    Note:1.Please loaded default for cmos after flash.
         2.*******Please use the 60W adapter when insert battery.*****

    not ready function & issue:


N51N2 570BIOS release (Rev. 0.06K)			        05/11/2001

*File name : 30N3006k.ROM
*Checksum  : 1980

            Base on 0.05K version

    Fixed:
        1. modify EC battery gasgae point

    not ready function & issue:
        3.Fn + B from Boot block power on.


Modified:
Add function:

**************************************************************************
30N3 BIOS Release Notification

*File name : 30N3005A				            04/30/2001
*system bios version : 0.05A
*Checksum  : C2DA

   SYStem BIOS  Notification:

        1.Base on 0.05A.T03 modify.
        2.Fix Win98 & WinMe S3 resume mouse can't work.
        3.Throttling function ready.
        4.Setup menu ready.
        5.Post Logo ready.
        6.BIOS version Check in post ready.
        7.change setup menu OS install from OTHER to WinMe
        8.Fix system will hang in Post when press F2.
        9.Remove workrun rounte in S3 resume when init Vgarepost function.
        10.Remove Com1 function.
        11.updata vgabios to version 6.11


    Note:1.Please loaded default for cmos after flash.
         2.*******Please use the 60W adapter when insert battery.*****

    not ready function & issue:


N51N2 570BIOS release (Rev. 0.05K)			        04/30/2001

*File name : 30N3005k.ROM
*Checksum  : F980

            Base on 0.05K.T03 version

    Fixed:

    not ready function & issue:
        3.Fn + B from Boot block power on.


Modified:
Add function:

**************************************************************************
30N3 BIOS Release Notification

*File name : 30N3005A.T03				            04/30/2001
*system bios version : 0.05A.T03
*Checksum  : CB91

   SYStem BIOS  Notification:

        1.Base on 0.05A.T02 modify.
        2.Fix Win98 & WinMe S3 resume mouse can't work.
        3.Throttling function ready.
        4.Setup menu ready.
        5.Post Logo ready.
        6.BIOS version Check in post ready.
        7.change OS install from WinMe to OTHER.



    Note:1.Please loaded default for cmos after flash.
         2.*******Please use the 60W adapter when insert battery.*****

    not ready function & issue:


N51N2 570BIOS release (Rev. 0.05K.t03)			        04/30/2001

*File name : 30N3005k.T03
*Checksum  : f980

            Base on 0.05K.T02 version

    Fixed:
        1.Thermal Point ready
                Fan on 4V       :> 54
                Fan on 5V       :> 60
                Fan off         :< 45
                Thermal on      :> 67 (ATF function)
                Thermal off     :< 60
                shutdown        :> 70
        2.ATF function ok


    not ready function & issue:
        1.thermal point.
        2.ATF function.
        3.Fn + B from Boot block power on.


Modified:
Add function:

**************************************************************************
30N3 BIOS Release Notification

*File name : 30N3005A.T02				            04/24/2001
*system bios version : 0.05A.T02
*Checksum  : a099

   SYStem BIOS  Notification:

        1.Base on 0.04A modify.
        2.Modify BootBlock workrun to Fix Code boot hang BIOS code 81.
        3.DMI function ready.
        4.Updat CPU micro code.
        5.Change SCI irq from 10 to 9
        6.Fix System Windows PCMCIA item is alway light.
        7.pass VGAREPOST code in Win98 and WinMe


    Note:1.Please loaded default for cmos after flash.
         2.*******Please use the 60W adapter when insert battery.*****

    not ready function & issue:
        1.setup menu not ready
        2.when WinMe & Win98 s1/s3 resume mouse can't work for native driver.
        3.POST Logo.


N51N2 570BIOS release (Rev. 0.05K.t02)			        04/24/2001

*File name : 30N3005k.t02
*Checksum  : 0d80

            Base on 0.04K version

    not ready function & issue:
        1.thermal point.
        2.ATF function.
        3.Fn + B from Boot block power on.


Modified:
Add function:

**************************************************************************
30N3 BIOS Release Notification

*File name : 30N3004A.ROM				            04/06/2001
*system bios version : 0.04A
*Checksum  : 2BB3

   SYStem BIOS  Notification:

        1.Base on 0.03A modify.
        2.updata system BOOT Block code. (Fix waiting long time 3 second)


    Note:1.Please loaded default for cmos after flash.
         2.*******Please use the 60W adapter when insert battery.*****

    not ready function & issue:
        1.setup menu not ready
        2.W2K PCMCIA R2 Card no function.
        3.when WinMe & Win98 s1/s3 resume mouse can't work for native driver.
        4.POST Logo.


N51N2 570BIOS release (Rev. 0.04K)			        04/06/2001

*File name : 30N3004k.ROM
*Checksum  : 0d80

            Base on 0.03K version

    Fixed:
        1.Change Battery function from Dummy Battery to smart Battery.
        2.Only support Ni Battery.
        3.Ni Battery plush charge time from 8 sec to 4 sec

    not ready function & issue:
        1.thermal point.
        2.ATF function.
        3.Fn + B from Boot block power on.


Modified:
Add function:

**************************************************************************
30N3 BIOS Release Notification

*File name : 30N3003A.ROM				            03/24/2001
*system bios version : 0.03A
*Checksum  : 6398

   SYStem BIOS  Notification:

        1.Base on 0.02A modify.
        2. Win NT 4.0 can't install problem.
        3. 1394 GUID can't write.
        4. Win Me / W2k S1/S3/S4 suspend resume not stable.
           Note: Win Me please use Standent VGA Driver.
        5. Win 98 S1/S3 function ready
           Note: Please use Standent VGA Driver.

    Note:1.Please loaded default for cmos after flash.
         2.*******Please use the 60W adapter when insert battery.*****

    not ready function & issue:
        1.setup menu not ready
        2.W2K PCMCIA R2 Card no function.
        3.when WinMe & Win98 s1/s3 resume mouse can't work for native driver.
        4.POST Logo.


N51N2 570BIOS release (Rev. 0.03K)			        03/24/2001

*File name : 30N3003k.ROM
*Checksum  : 0d80

            Base on 0.03K version

    Fixed:
        1. Base on 0.02K modify.
        2. press Power Botton shutdown in DOS mode.

   not ready function & issue:
        1.thermal point.
        2.ATF function.
        3.Fn + B from Boot block power on.


Modified:
Add function:

