
Ver2.12-22 08/17
1.Fixed a problem for system temperature is under 0 degree.

Ver2.12-20 07/27
1.Change LID-Thermal control function by delay 10 minute.
2.Lid_thermal countor default is 10 minute (Bank=111,index=0F4h).

Ver2.12-19 07/23
1.Support P7.7,6 to GPIO function .
1.Fixed Mouse problem when system resume.

Ver2.12-18 07/06
1.Add two batteries low support in OEMFLAG1.5 .
1.Add two batteries low beep support in OEMFLAG1.4 .

Ver2.12-17 07/03
1.Removed power down task to no task function
2.Add new G768 polling function (current speed 10h)and change previous ( control
 speed 11h) to EC-RAM 9Bh.

Ver2.12-16 06/25
1.Added LID function
2.Added LID-Thermal function
3.Added G768 initial function
4.Added new command for Beep

Ver2.12-15 06/13
1.Change polling batteries pin.

Ver2.12-14 06/12
1.Fixed dual batteries polling bug.

Ver2.12-13 06/12
1.Fixed dual batteries polling bug.

Ver2.12-12 06/11
1.Supported dump batteries polling support.

Ver2.12-10 06/06
1.Add G768 F1 register initial function (fill C4h)

Ver2.12-10 06/04
1.Fix trap SMI bug

Ver2.12-09 05/28
1.Add internal device disable function.(OEMFLAG1.1)
2.Add KBC Trap function.(OEMFLAG1.0)
3.Add initial G768 watch dog function in POST.

Ver2.12-08 05/22
1.Change Fan control method.
2.The default of FAN is ON and in FANSPEED 2 (66h).
3.Add 3 Cmds for fan control.

Ver2.12-07 05/21
1.Changed Thermal remove alarm event ID to 77h
2.The default of FAN is ON and in FANSPEED 1 (7Bh).

Ver2.12-06 05/17
1.Remove EEPROM inittial function

Ver2.12-05 05/09
1.Add new command for P5.2,3 open drain function

Ver2.12-04 04/30
1.New option for Bar code reader support.Dedault is support.(OEMFLAG.5)
2.LID-Thermal support

Ver2.12-03 04/27
1.Bar code reader support in runtime

Ver2.12-02 04/25
1.Added polling FAN speed function

Ver2.12-01 04/24
1.Update new core code.
2.Added EEPROM access feature in POST.
3.Remove automatically task switch function,because new core code
 already support.
4.Added new Lid task (Lid fixed in P67).
5.Added Virtual power mode
6.Fix Fan control problem
7.Correct version number

Ver0.12  04/03 First release
1.Added P20-P24,P60-P67 wakeup through AND gate


