BUILD LETTER
TITLE
    System BIOS  - WW -
PART NUMBER
    xxXxxxx
ISSUE DATE
    08/10/2001
BUILD DATE
    08/10/2001
ORIGINATOR
    Jason CS Lin
    Jason_CS_Lin@acer.com.tw
    Tel:02-8691-3782
PRODUCT DATA
    MEDIA TYPE   : Floppy, HDD or CD-ROM
    LEVEL        : SFT
    SYSTEM LIST  : T2
    VERSION      : R01-B6
    DATE STAMP   : 08/10/2001
    BUILD ID     : AIBF32WW
    BIOS ROM SUM : 0x04030E2C (SUM)
    CHECK SUM    : 0x4D009E53 (CRC -L)
    VIRUS CHECK  : Office Scan pattern : 923
MEDIA BASED UPON
    TITLE        : None
    DATE STAMP   : None
    BUILD ID     : None

-- How to clean install:

   0. Please create bootable disk first.
   1. Copy the ZIP file to your HDD. The recommended directory is C:\drivers\BIOS.
   2. Then unzip it with -d option to store the sub-directories.
      ex.)PKUNZIP -d C:\drivers\BIOS\*.ZIP C:\drivers\BIOS
   3. Plug in USB FDD to reboot to DOS mode. 
   4. In directory C:\drivers\BIOS, run "T2-R01A7" to flash BIOS.
   5. After flash BIOS, it will reboot to OS automatic.
  
  
-- How to over install:

   It is the same as clean install.

-- How to uninstall:

   No way.
      
-- How to check version:

   1. Press F2 enter to BIOS setup screen while system POST.
   2. Select "Information" and see System BIOS version.
     
-- How to do the unattended install:

   No way.

-- Special notes or Restrictions/Cautions:

   None


-- The history of modifications :

------ AIBF32WW-----------------------------------------------------------
 (Reason)
   1. WIN98 can't be shutdown to MSDOS.
   2. Don't erase the SmartCard Password while Winflash is programming.
   3. Change the Max supported CPU to 1GHz in DMI table.
   4. Win98 Hibernation fail.
   5. Fan Stop show up during BIOS POST sometimes.
   6. Display can't be turn on if using RTC wake up from S1.
   7. After warm start from Win2000 and boot to DOS, the thermal will be fail.
   8. SpeedStep can't switch while Thermal SpeedStep(T4) event happened under DOS.
   9. Update Thermal default setting.
  10. Update Ver.2422 VGA BIOS to match Logo VGA driver Ver.2759.
  11. Provide a INT15 function call to get thermal value for thermal AP.

------ AIBF31WW-----------------------------------------------------------
 (Reason)
   1. Remove the BIOS evaluation message during BIOS POST.
   2. Warm Boot will make system hang sometimes.
   3. System hang up while entering S1 under SmartCard enabled. 
   4. Fix it can't switch LCD/CRT after you switched LCD/CRD 
      from NoteBook Manager.
   5. Fix it will show Wireless LED without Wireless device after Wireless enabled.
   6. Add the "Acer" and "TM610" string to the ACPI FACP table for WIN-XP.
   7. System will abnormal if launch key is pressed quickly.
   8. BIOS need to check the EC ready while reported the secondary bay status
      via EC Command.
   9. Add a INT15 Entry, AX=9612h/BL=52h, to access High Address Memory.
  10. System will auto shutdown while entering S1 twice under WIN-XP.
  11. System hang sometimes while system warm boot.
  12. BIOS will report battery is charging while 2 battery are present.

------ AIBF30WW-----------------------------------------------------------
 (Reason)
   1. WIN98 Hibernation resume will result to system reboot
      while FIR is disabled from O.S.
      Solution:
	Re-call ACPI Enable function while resume from S4-BIOS. 
   2. Fixed the side effect about USB Mouse solution.
      Problem:
	1. System hang while booting from CDROM and loading CDROM drivers.
	2. System hang while resuming from Hibernation under WIN-ME
      Solution:
	1. Remove the code "Enabled PCI Interrupt".
	2. Disable USB Controller 2 during POST via PCI CMD Reg04=0.
   3. Can't press F2 to enter setup screen sometimes.
      Reason:
	cmosOemS4OS = 1, result F2 can't be accepted.
      Solution:
	Clear cmosOemS4OS after cmosOemS4OS checking.
   4. Modify the Bay Swap function for WIN2000.
      (1) Turn On/Off IDE Bay's power after resume from S1 under WIN2000
      (2) Save/Restore IDE Timing Register during Bay Swap.
      (3) Notify BAY Changed event after S1 resume.
   5. Set the CardBus IRQ based on CMOS setting of INTB# during POST.

------ AIBF29WW-----------------------------------------------------------
 (Reason)
   1. To fix the issue under WinMe, press Fn+F5 can't toggle 
      when no connected external monitor. 
   2. Add Microcode to support P3MPGA2PC0,P3MPGA2PD0 stepping
   3. Change the string to "Hdd Password Invalid".
   4. After access the iPAS password, flash BIOS fail.
   5. New iPAS.BIN included to solve smartcard can't work issue.
   6. New VGA BIOS Version 2344
   7. Fixed USB Speaker can't work normally.
   8. HA01292: Power Meter icon does not change when AC In/Out Under WIN-ME
      Solution:
	Always report battery charge status if gauge is less than 100% 
	even battery was not charging.
   9. SmartCard Reader defualt to "disabled" and remove the setup item from setup screen.
  10. USB Mouse can't work smoothly.
      Solution:
	1. Enabled PCI Interrupt for USB Legacy Keyboard during POST.
	2. Disable USB Legacy SMI while ACPI enabled.
  11. Provide TM610 Model Name("T2") interface AX=9604h, BH=0F7h

------ AIBF28WW-----------------------------------------------------------
 (Reason)
   1. Set the BayPower On before CDROM initalized.
   2. Set RI# enable/disable based on CMOS bit before entering S1
   3. Mute Audio before system shutdown.
   4. Wake On Lan/Modem default to "Enable" in CMOS.
   5. Bay Swap Fail under WIN2000
   6. IA01515: Total battery capacity is wrong with the 2'nd battery.
   7. Don't disable the UDMA mode while DVD is attached.

------ AIBF27WW-----------------------------------------------------------
 (Reason)
   1. Fix HCT LOG test fail because of Sub-VendorID.
   2. Fix: Too many warning message when input the wrong HDD pwd during POST.
   3. Fix when resume from S4, avoid system can't boot to FDD and enter setup,
	disable F12,too.
   4. Support ST flash part for TWN winphlash
   5. Don't clear iPAS password while DIP switch is set to bypass.
   6. Enable Bus Master Reload bit on ICH2
   7. SmartCard function default to "Enabled" in CMOS.
   8. Clear RTC Wake Event before system enter S1/S4/S5 state.
   9. Disable RI# and AC97 before S5/S4
        Set the AC97 wake event based on CMOS setting in S1.
  10. Battery information report T2\ACPI\acpw.asi
  11. SmartCard Reader and WakeOnLan default to "Disabled".

------ AIBF26WW-----------------------------------------------------------
 (Reason)
   1. It base on Ver.R00B9 and Only for VCH A2.

------ AIBF25WW-----------------------------------------------------------
 (Reason)
   1. Provide INT15 SpeedStep Switching function (AX=9610h, BL=30h)
   2. Double confirm the thermal SMI is over T5 for Launch Manager.
   3. Disable thermal task before S5 and S4 & clear SMI/SCI status of ICH2
   4. While Fan does not work, pause the BIOS POST.
   5. LCD display will disappear sometimes after system power ON.
   6. Password mis-match between NoteBook Manager and BIOS setup security.
   7. Add code to support WinPhlash
   8. decrease BCG code size - remove pnpISA function because 610 have no PnPISA device.
   9. Update VGA BIOS to 2335
  10. Update features' file for quietboot LOGO has garbage when enter SETUP.
  11. IA01495 modify SETUP string.
  12. Fix when there is a bootable FDD in FDD drive, system will boot to FDD when 
      resume from S4.
  13. VGA BIOS default enable the function of expansion 
      and it would not appear abnormally.
  14. Geyservile switching is fail while thermal T4 is over.
  15. Fn+F5 hang up under WIN-ME full DOS prompt.

------ AIBF24WW-----------------------------------------------------------
 (Reason)
   1. It base on Ver.R00B8 and Only for VCH A2.

------ AIBF23WW-----------------------------------------------------------
 (Reason)
   1. add code back.It makes hot-swap hang.
   2. HDD password can set in BIOS SETUP by "space" key but can't
      be input during POST check.
   3. Without Touchpad driver, after S1, Touchpad get ! and hang.
   4. The system will show blue screen under Win2K's Notebook Manager 
      if you key the password "22222222" when Supervisor Password enabled
   5. The system will show blue screen under Win2k when you are 
      installing SmartCard AP
   6. Report 100% while battery gauge is 99%

------ AIBF22WW-----------------------------------------------------------
 (Reason)
   1. Thermal default value change as below:
      ST0,ST1,ST2,ST3,ST4,ST5,ST6,CT3, CT4, CT5, CT6, F0,  F1,  F2, CWL, CWH,SWL,SWH
      35, 40, 65, 70, 75, 85, 87, 120, 120, 105, 110, 7Bh, 64h, 5Ch, 88, 98, 70, 80
      (1) CPU T4 throttling will be disabled.
      (2) Fan Speed will be changed to slower value.
      (3) SYS and CPU shutdown value will be changed to higher value.
      (4) System Watch Dog thermal will be change to higher value.
   2. Force set the Sub-Vendor and Sub-System ID to TI1410.
      Set Muti-Function Pin of TI1410 to INTA#.
   3. Remove the item Smart Card and Display Cache from setup screen.
      And the default setting set to "Enabled".
   4. Serial Port deault to "Enabled" in setup screen.
   5. While BIOS POST not complete, don't show error message
      "previous boot incomplete"
   6. Add a CMOS to control audio Mute enabled/disabled.
   7. Fix HCT unreported IO fail.
   8. Fix HCT W2K 'ACPI system' test fail.
   9. Fix HCT unreported IO.
  10. Fix HCT test Pre-OS acpicmb.exe test fail.
  11. Fix Hot swap DVD system hang.
  12. remove useless code to save code size.
  13. TI1410 set to interrupt mode.
  14. Modify phlash utility to support !
  
------ AIBF21WW-----------------------------------------------------------
 (Reason)
   1. It base on Ver.R00B6 and Only for VCH A2.

------ AIBF20WW-----------------------------------------------------------
 (Reason)
   1. Display cache change to 3 CAS# latency.
   2. HDD password dialog box got wrong format.

------ AIBF19WW-----------------------------------------------------------
 (Reason)
   1. It base on Ver.R00B5 and Only for VCH A2.

------ AIBF18WW-----------------------------------------------------------
 (Reason)
   1. Bay Power is not turned ON while DevBay plug-In.
   2. S1 resume fail under LongRun testing via Fn+F4.
   3. Does not wait for 4 seconds under setup screen.

------ AIBF17WW-----------------------------------------------------------
 (Reason)
   1. It base on Ver.R00B4 and Only for VCH A2.
 
------ AIBF16WW-----------------------------------------------------------
 (Reason)
   1. To implement 32 bit Interface of SmartCard read/write function in INT15h.

   2. Update VGA BIOS

   3. Display 'Press F12 to display boot menu' message in POST.
      and use new logo.

   4. Set COMA default value is disable
	T2\oemcmos.asm

   5. Modify IDE code because Herman modify too much to makes Hot swap hang.

   6. Rewrite procedure "oemGetUUIDInfo" to fix serial bug:
      BIOS code in PostSegmentFar (PCG) is destroied.

   7. In SETUP, COMA/COMB only check the conflict for same IO,
    	  not checking same IRQ setting (i.e., no "*").

   8. Remove "Add-in Card" in HDD option of Boot sequence of SETUP away.

   9. SMBIOWFM.EXE test fail.

  10. Check iPAS password need to move before entering SETUP.

  11. Clear iPAS Password while DIP Switch bypass password check.

  12. Thermal Event support for launch manager.

  13. Remove IRQ4, IRQ5 and IRQ6 from PCI IRQ Routing table.

  14. Don't change the AC status in time if AC In/Out.
      Reason:
	  That is OS limitation, WIN2000 is fine. But, ME is fail.
	  We need to notify the Battery A/B power change if AC In/Out.

  15. Fail to enter S1, solution get from Intel.

  16. Add a CMOS bit to control SmartCard Reader disabled/enabled.
	T2\oemcmos.asm
	T2\EXTINT15\nbm.asm
	T2\PCMCIA\oemcb.asm
	T2\SETUP\NODES\make.mak
	T2\SETUP\NODES\smartcrd.asm
	T2\template.asm
	T2\oemt2.str

  17. Remove PS/2 hot switch function to support both Internal and External
      PS/2 Mouse workable.

  18. Display Cache default to Enable.

  19. LCD Expansion Mode Enable/Disable from Setup Screen
      And, boot display default to "Auto" mode.

  20. Report the battery gauge via SMI
      And, Reserve a CMOS Bit 4Ah[0] for battery mark test.

------ AIBF15WW-----------------------------------------------------------
 (Reason)
   1. correct routing table according to Intel implementing mail.
   2. Update VGA BIOS to shorten boot time. - not to display signon message.
   3. Win2000 will not call ACPI_EN at warm boot and Phoenix Service interface is gone.
   4. Use DW3n to decide bypassing password of SuperVisor/User/ If yes, bypass and clear all       password.
   5. Modify Help string for Boot on LAN.
   6. Modify Help string.	
   7. Flush HDD data and wait for 4 seconds before S4 shutdown.
   8. Battery Low Beep during POST
   9. Clear the iPAS password while creating the data area.
  10. 10 secends boot target (Fast Post).
  11. Move SMBIOS (DMI table) from D segment (16k) to E000:0
  12. In SETUP, when disable, please hide "mode" for FIR and LPT just like COMA.
  13. In BIOS Setup Screen, the explain of F5 and F6 don't appear in description of HELP.
  14. 32bitInterface of NBM.
      Move 32bit code to F000 segment from E000 segment.
  15. CPU Serial Number of BIOS Setup Screen defult change to disable.
  16. To implement password write to FWH for NBM and SETUP.
  17. Disable hotkey(Fn+F5) while in Notebook manager.
  18. remove useless code about batt in/out beep, use correct beep procedure
      for Batt in/out beep.
  19. Correct code to pass the correct thermal data.
  20. Move _Q7B, only keep _Q7A for both Battery A/B critical low to 
      match KBC BIOS version 2.03.
  21. To fix W2000 blue screen issue during booting when using 512MB memory.
  22. Rewrite the read/write interface of password/FWH under SMI to avoid 
      code to be destroied by memory buffer and system is abnormal.
  23. User/SuperVisor/iPass password were erased after phlashing.
      (=> Don't flash ESCD to keep password.)

------ AIBF14WW-----------------------------------------------------------
 (Problem) 

 (Reason)
   1. Add the hotkey Fn+F6, display Off function.
   2. Battery Low warning need to sync with KBC during BIOS POST.
   3. Smart Card Password support.
   4. Re-enable the SLP_SMI, if S0 is called before S1.
   5. Battery In/Out Beep.
   6. While Battery is 99%, APM 530A will report 100%.
   7. Clock generator init for H/W request.
   8. Disable display cache during BIOS POST.
   9. Switch thermal task to SCI while ACPI enabled. (KBC 2.03 or later)
  10. Enable Lid thermal function. (KBC 2.03 or later)
  11. Solve Wake On Lan for S5.
  12. Due to Intel Issue, don't support the Screen Expansion function.
  13. Add the Intel solution for S4/S5 fail to enter issue.
  14. Enable PS/2 hot switch function to exclusive the PS/2 mouse inserted.
  15. Internet key can't work for New Keyboard.

 (Solution)

------ AIBF13WW-----------------------------------------------------------
 (Problem) 

 (Reason)
   update release.

   1. After S1 resume, need to press twice any key to wake up system.
   2. LongRun99/Warm Boot test will make the system hang under WIN-ME.
   3. System POST is slow after Warm Boot.
   4. 2'nd Battery report error for APM 530A function.
   5. Correct the L2 cache return value for INT15.
   6. Add INT15 interface for the Asset Tag Number writting.
   7. DMI table modify at TYPE 0.
   8. Typing error to Hdd password msg "Cause Hdd No Function".
   9. Support NBM finction call ax=9610/bl=022 Get Memory Size.
  10. Correct PCI Routing according to our routing table spec.
  11. for ENG machine DW3 default setting to not bypass Password.
  12. Add F5/F6 to select Boot Menu of SETUP.
  13. FAN ON always while phlash system BIOS.
      Set HDD idle for safety before shutdown.

 (Solution)

------ AIBF12WW-----------------------------------------------------------
 (Problem) 

 (Reason)
   update release.

   1. While system is doing sleep state, the Serial IRQ may still issue.
   2. Boot Sequence still found LAN if Boot LAN disable under NBM.
   3. Disable Brghtness hotkey function while NBM is active.
   4. After shutdown to DOS, all KBC SMI will be inactive.
   5. Change the hotkey switch order: LCD --> CRT --> Both
   6. Panel Brightness default setting changed.
   7. Fast Boot function fail in NoteBook Manager.
   8. Battery gauge can't display 100%. 
   9. Save Supervisor and User password into FWH.
  10. SMBios to get string (Manuf,Product,Asset.Serial) form eeprom
  11. Support press "F12" for Boot Menu select.
      Add F5/F6 to select Boot Menu of SETUP.


 (Solution)

------ AIBF11WW-----------------------------------------------------------
 (Problem) 

 (Reason)
   update release.

   1. Fix Hotkey help string is our of margin in SETUP.
   2. Applet speedstep no function.
   3. Fix RTC issue for enterring Date and Time in wvery boot.
   4. LCD Auto DIM function support.
   5. Add the Fast Boot function for NoteBook Manager.
   6. Modify the APM function 530A based on New KBC BIOS changed.
   7. Issue a SMI while Thermal throttle SCI event happened.
   8. Hotkey Beeper function is only for Fn+F4, Fn+F7.
   9. Change to System Thermal in ASL code.
  10. Correct the Launch key P3 & Mail Map.
  11. CMOS load default setting will result in system hang.
  12. Clear more SMI event while system power OFF.
  13. User must press twice keyboard then system will resume from standby in Win2000.
  14. Support wake system from S1 by external anykey.
  15. Support RTC wake from S4.
  16. Modify USB support wake from S1.
  17. Sometimes boot from 98SE floppy, the prompt appears "A:\>^@".
  18. Press Fn+F6 (SMI) to do display on/off switch.

 (Solution)

------ AIBF10WW-----------------------------------------------------------
 (Problem) 

 (Reason)
   update release.

   1. Thermal Throttling enable if Geyservile Thermal is not supported.
   2. System hang at check point 9C or AA if RTC battery was removed.
   3. Wireless status report error.

 (Solution)

------ AIBF09WW-----------------------------------------------------------
 (Problem) 

 (Reason)
   update release.

   1. Clear wake up event of power button.
   2. Remove the delay 2 seconds from hookBiosReset.
   3. Add the checksum solution for the thermal value of EEPROM.
   4. Change the thermal default value for H/W requirement.
   5. Don't check the last boot fail flag during POST.
   6. Move the "Battery Polling timer" to PM_SETUP.
   7. Remove the Thermal Trottling and wait for Suzie's interface
     to switch the speedStep mode between Battery and Performance.
   8. Retry 20 times to G768 access while it is fail.
   9. Set the After_G3=1 bit(ICH_LPC_REGA4[1]=1).
  10. Enable Sleep SMI in S5 of _PTS
  11. Fn+F5 SCI disable in oemacpisetEc2SMI.
  12. BIOS Post Logo set to Acer.pgx while SW1=On.
  13. Add the DIP switch check code for BootBlock .
  14. Don't need to report the battery change for BaySwap interface.  (AX=9613, BX=0002h)
  15. Add Clock Generatore C9835 Interface(SMBus Bolck Access).
  16. Translate the HDD Master password from the prefix 8 non-blank charaters 
     of HDD serial number.
  17. Add Video Extension for Fn+F5 function - jm013.
  18. Fix LDCM some problems under Win98SE/WinME.
  19. Fix ir function under OS.
  
 (Solution)

------ AIBF08WW-----------------------------------------------------------
 (Problem) 

 (Reason)
   update release.

   0. Update flash tool for SST 49LF004.
   1. DMI Table Type 1 modify.
   2. Add thermal solution into POST/SMI.
   3. Switch Audio to Inner Speaker.
   4. Support Fan Always On function.
   5. Support Longrun 99 interface.
   6. Change the default settings of EEPROM statucture.
   7. Acer BIOS Logo included.
   8. Support reboot after phlash completed.
   9. Support DIP switch check for SmartCard.
  10. Support DIP switch check for power on passsword.
  11. Support load default function call.
  12. Remove redaunt code.
  13. Support ACPI Battery.
  14. Support C0-Step 1GHZ CPU.
  15. Support HDD Master password.

 (Solution) 

------ AIBF07WW-----------------------------------------------------------
 (Problem) 
   CMOS Load default will result in system hang at check point 38h)
 (Reason)
   LAN ROM boot is conflicted with other code.
 (Solution)
   1. Add AGP Device for ACPI Video Extension. (jm007)
   2. Turn ON LCD backlight before VGA Init.
   3. Keep BIOS version into SMRAM for INT15 factory use.
   4. Add the R00-A5's code into Phoenix code for Hotkey SMI, 
      NoteBook Manager and Bay Swap.
   5. Correct INT15 interface for "BIOS Revision and Product Name"
   6. Back the ROM.SCR to R00-A5's code.
   7. Enhanced INT15 Interface for NoteBook Managerment.
   8. Support BaySwap function.
   9. Hotkey/Launch Key support.
	      
------ AIBF06WW-----------------------------------------------------------
 (Problem) 

 (Reason)
   update release.
 (Solution)
   1. CMOS defulat settings:
    cmosPnpClearESCD  ---> Enabled
    cmosSummaryscreen ---> DISABLED	- jm000
    cmosCfgIsaBootOnly --> 0		- jm001
    cmosNumlock ---------> 3
   2. Support BaySwap function.
   3. Support CPU C3.
   4. Description	: program 1.6/1.7V CPU depend on CPU.	< jm005 >
   5. Update New VGA BIOS.

------ AIBF05WW-----------------------------------------------------------
 (Problem) 

 (Reason)
   update release.

 (Solution)
  
------ AIBF04WW-----------------------------------------------------------
 (Problem)
  
 (Reason)

 (Solution)
  1.Add BootBlock function and CRISIS function ok.
  2.Fix bug: System takes long time to wait in SETUP (SECURITY)
			   if it is CDROM.
		  Solution: set ignore bit if the driver is ATAPI device (CDROM).
  3.Fix bug: (a). Win2000 install fail.
			   (b). There is no "hibernate control" appearance 
				in ME3000.
		  Cause	: wrong path for LNKA~H (PIB->LPC0).
  4.Change Intel internal LAN IRQ from PIRQA# to PIRQE# to fix
		  LAN driver can not install ok issue.
  5.Pull in "passwordPromptList" to fix password screen in 
		  entering BIOS SETUP has wrong code when keyin "wrong password".

  6.Set the Screen Expansion based on CMOS setting.
  7.Boot Display INT15 function support based on CMOS.
  8.Get Battery Gauge for NBM and APM(530Ah).
  9.Reserved 16 Bytes CMOS in NV1 for factory use.
 10.Hotkey SMI support : Fn+F1, Fn+F2, Fn+F3, Fn+F5, Fn+F8. 
 11.Add INTC# and INTD# for WireLess LAN 802.11
  
------ AIBF03WW-----------------------------------------------------------
 (Problem) 
  1. The right USB port no function.
  2. LAN on board no function.

 (Reason)
  1. GPIO set error.
  2. PCI Routing Table set error.

 (Solution)
  1. Set Multi-Function Pin to GPIO pin. 
  2. Correct PCI Routing Table.

------ AIBF02WW-----------------------------------------------------------
 (Problem) 

 (Reason)

  The attached BIOS is updated for :
 1. Hotkey SMI support : Fn+F1, Fn+F2, Fn+F3, Fn+F5, Fn+F8
 2. NoteBook Manager Interface & INT15 Interface enhanced( Not done now )
 3. Reserved 16 Bytes CMOS in NV1 for factory use.
 4. Get Battery Gauge for NBM and APM(530Ah).
 5. Boot Display INT15 function support based on CMOS setting.
 6. cmosDiagScreenOnly defualt to Disabled
 7. Set the Screen Expansion based on CMOS setting.
 8. Add HDD Password function for HDD0 (Primary master) and HDD2 (Secondary master).
 9. Formal release code to ACER.
10. Modify SETUP items based on T2 project.
11. Re-organsie and divide ASL code to some *.asi files.
12. Sub-System & Sub-Vendor ID. 
13. Add hook code hookPmSetupJ hookPmSetupFar.
14. Modify the hookInt19J to init the CardBus Register.
15  Init O2 CardBus Controller. 
16. Enable Audio Ampilifer. 
17. Flush HDD in power OFF SMI. 
18. Enable Power Button.
19. PCMCIA PCI IRQ Routing : INTA# --> PIRQA#. Remove INTB# --> PIRQE#. 

 (Solution)
 
------ AIBF01WW-----------------------------------------------------------
 (Problem) 

 (Reason)
   First release.
 (Solution)

======================== End of Letter =======================================

