   LAN Server 4.0

   Introduction:
   -------------
   This document describes the procedure to install NDIS driver on
   OS/2 LAN Server 4.0 for 
       AcerLAN ALN-330 10/100 Base-TX Fast Ethernet adapter.

   Location of Driver: \OS2NDIS\AN330.OS2

   Installing driver procedure on OS/2 LAN Server 4.0:
   ---------------------------------------------------
      Before you start with the installation  process,  make sure that
      OS/2 LAN Server  is properly installed.  Similarly, your adapter
      should also be properly installed in your server.

      1. In OS/2 window, Click the "MPTS" icon.

      2. The screen will display the IBM Log, press "OK".

      3. Select "Install" button.

      4. Insert the AcerLAN ALN-330 driver diskette, specify the driver
         path A:\OS2NDIS and press <Enter>.

      5. When complete above step to load  AN330.OS2  into OS/2 system,
         then configure your system.

      6. The same step as step 3, select "Configure" button.

      7. The screen will display "Configure" dialog box and select "LAN
         adapters and protocols" then press "configure" button.

      8. The screen will display "LAPS Configuration" dialog box, move
         highlight to 
             "AcerALN ALN-330 10/100 Base-TX Fast Ethernet Adapter" 
         item in "Network Adapter" window, and select "NetBios"  protocol.          Press "OK".

      9. Installation is complete now. Reset your PC by turning it off
          and on.

