   Server Driver for NetWare 5.0

   Introduction:
   -------------
   This document describes the procedure to install the NetWare v5.00
   server driver for AcerLAN ALN325  Fast Ethernet adapter.

   Location of Driver:     \NWSERVER\ALN325.LAN

   Installation Procedure :
   ---------------------
      Before you start with the installation  process,  make sure that
      the Novell NetWare v5.00 server is properly installed.
      Similarly, your adapter should also be properly installed in your
      server.
      1. Insert the ALN325 Driver Diskette into drive A and check the
         contents of subdirectory  \NWSERVER, It should contain the
         following files :

         ALN325.LAN   Novell NetWare V5.00 Server Driver
         ALN325.LDI   Novell NetWare V5.00 Server Driver Installation
                       Information File     

      2. At the  NetWare prompt (indicated by the Server name), run the
         INSTALL.NLM program by typing:

         server name: LOAD INSTALL <Enter>

      3. Select "Maintenance/Selective Install" and press <Enter>.

      4. Select  " LAN Driver Options (Configure/Load/...) "  and press
         <Enter>.

      5. Press the <Ins> key to specify other drivers to install.

      6. Press  <F3>  and specify the driver path (A:\NWSERVER)
         and press <Enter>.

      7. The ALN325.LAN driver should appear in your choice list for the
         'Select a  LAN  Driver' field. Choose this  driver to start the
         driver loading and  binding  procedure.  This will allow you to
         load and bind all 4 frame types supported by NetWare.

      8. Add the LOAD and BIND statements you require to the server's
         AUTOEXEC.NCF file so that the LAN driver will load automatically
         each time the server starts up.


      Installation Notes:
      -------------------
      1.Installing Multiple LAN Adapters:
         The keyword  "SLOT"  is  provided for multiple LAN adapters in a
         single server by the driver ALN325.LAN.  So, add EtherID in LOAD
         commands. For example:

         LOAD ALN325 FRAME=Ethernet_802.2 NAME=LAN_A SLOT=1
         BIND IPX TO LAN_A NET=11
         LOAD ALN325 FRAME=Ethernet_802.2 NAME=LAN_B SLOT=2
         BIND IPX TO LAN_B NET=22

      2. The keyword  "SPEED"  is  provided for specifying adapter's speed
         (10M/100M), add SPEED in LOAD commands. For example:

         LOAD ALN325 FRAME=Ethernet_802.2 NAME=LAN_A SLOT=1 SPEED=100
         BIND IPX TO LAN_A NET=11

                                                          -- End --
