+============================================================================+
				KAV10 ROM Release Note
+============================================================================+
BIOS CORE Version ................  Insyde EFI 2.0
CPUs Supported    ................  Intel Atom N270
Chipset           ................  Intel Calistoga 945GSE
Bridge            ................  Intel ICH7M
Memory            ................  DDR2 
CardReader        ................  Realtek RTS5158E
Video             ................  UMA
Audio             ................  HD Audio Realtek ALC272
LAN               ................  Atheros AR8114A
1394 controller   ................  N/A
KBC               ................  ENE926
Clock Generator   ................  SLG8SP556VTR
Super I/O         ................  N/A
BIOS ROM Part	    ................  MX25LV008BB(SPI_FLASH:1MB)
================================================================================
+==============================================================================+
| MODEL NO. :  KAV10                               RELEASE DATE : 02/02/2009   |
|------------------------------------------------------------------------------|
|   Major Version    : V1.03                    	                       |
|   KBC BIOS Version : V1.03                                                   |
|   VGA BIOS         : 1585                                                    |
|   Phase Status     : MP Build                                                |
|   Flash Utility Ver: 1.3i                                                    |
|   Clock Generator  : 01h,84h,F1h,66h,FFh,E8h,03h,06h,10h,A5h,01h,01h         |
|   Checksum (FD)    : B416 h           		                       |
+==============================================================================+
BIOS:
   1).Fix reclaim rule, make reclaim rule can backup C segment to D segment.
      Let EC can't wake up from wait mode during reclaim. 
      (Maybe can fix reclaim fail issue to make C & D segment become "FF") 
   2).Fix can't use Reboot.com tool. 
   3).Improve code for read EEPROM.
   4).Implement Hdd Freeze function.
EC:
Fixed:
      1.> Fix pressing F6 can't turn on back light after Fn+F6.
Modified:
      1.> Will keep the brightness level after shutdown under DC mode.

		 
+==============================================================================+
| MODEL NO. :  KAV10                               RELEASE DATE : 01/21/2009   |
|------------------------------------------------------------------------------|
|   Major Version    : V1.02                    	                             |
|   KBC BIOS Version : V1.02                                                   |
|   VGA BIOS         : 1585                                                    |
|   Phase Status     : MP Build                                                |
|   Flash Utility Ver: 1.3i                                                    |
|   Clock Generator  : 01h,84h,F1h,66h,FFh,E8h,03h,06h,10h,A5h,01h,01h	       |
|   Checksum (FD)    : 8A86 h           		                                   |
+==============================================================================+
BIOS:
   1). Modify LG Panel ID.
   2). Remove MBR function.
   3). Modify Kernel Get Variable method
EC:
Fixed:
		 1.> Fix EC_ON will keep high after battery only shutdown.
Modified:
     1.> Add work run for SMUBS communication but no interrupt.

+==============================================================================+
| MODEL NO. :  KAV10                               RELEASE DATE : 01/16/2009   |
|------------------------------------------------------------------------------|
|   Major Version    : V1.01                    	                             |
|   KBC BIOS Version : V1.01                                                   |
|   VGA BIOS         : 1585                                                    |
|   Phase Status     : MP Build                                                |
|   Flash Utility Ver: 1.3i                                                    |
|   Clock Generator  : 01h,84h,F1h,66h,FFh,E8h,03h,06h,10h,A5h,01h,01h	       |
|   Checksum (FD)    : D2CA h           		                                   |
+==============================================================================+
BIOS:
   1). Add LG Panel ID.
   2). Fix S3 resume issue.
   3). Update D2D function to avoid occur HDD lost rate.

EC:
Fixed:
Modified:
     1.> Fix Option380 warm boot initial error issue.
Add:
     1.> Add brightness table for LG panel.
     2.> Add workaround for AUO panel.

+==============================================================================+
| MODEL NO. :  KAV10                               RELEASE DATE : 01/13/2009   |
|------------------------------------------------------------------------------|
|   Major Version    : V1.00                    	                             |
|   KBC BIOS Version : V1.00                                                   |
|   VGA BIOS         : 1585                                                    |
|   Phase Status     : MP Build                                                |
|   Flash Utility Ver: 1.3i                                                    |
|   Clock Generator  : 01h,84h,F1h,66h,FFh,E8h,03h,06h,10h,A5h,01h,01h	       |
|   Checksum (FD)    : 67AA h           		                                   |
+==============================================================================+
BIOS:
   1). Fix Fn key function sometimes can't work.
   2). Update Microcode 106C2 Rev:212.
   3). Improve long run issue from insyde.
   4). Add work around for warmboot issue.

EC:
Fixed:
Modified:
     1.> Add work around for warmboot issue.
Add:
     1.> Add SPI protect function.
     2.> Add Battery mode in name space for AP.

+==============================================================================+
| MODEL NO. :  KAV10                               RELEASE DATE : 01/10/2009   |
|------------------------------------------------------------------------------|
|   Major Version    : V0.14                    	                       |
|   KBC BIOS Version : V0.14                                                   |
|   VGA BIOS         : 1585                                                    |
|   Phase Status     : C Build                                                 |
|   Flash Utility Ver: 1.2n                                                    |
|   Clock Generator  : 01h,84h,F1h,66h,FFh,E8h,03h,06h,14h,A5h,01h	       |
|   Checksum (FD)    : CD9F h           		                       |
+==============================================================================+
BIOS:
   1).Add Samsung Panel ID.
   2).Fix Option 380 Led function is abnormal when power on or restart.
   3).Fix System power off directly after Winflash.
   4).Improve long run issue from insyde.

EC:
Fixed:
        1.> Fix Numlk and display auto dim are workable in BIOS setup menu.

Modified:
	1.> Update brightness table for samsung panel.
	2.> Modify c45 d1c, add c45 dad.
	3.> Modify wireless process.

+==============================================================================+
| MODEL NO. :  KAV10                               RELEASE DATE : 01/07/2009   |
|------------------------------------------------------------------------------|
|   Major Version    : V0.13                    	                       |
|   KBC BIOS Version : V0.13                                                   |
|   VGA BIOS         : 1585                                                    |
|   Phase Status     : C Build                                                 |
|   Flash Utility Ver: 1.2n                                                    |
|   Clock Generator  : 01h,84h,F1h,66h,FFh,E8h,03h,06h,14h,A5h,01h	       |
|   Checksum (FD)    : 7912 h           		                       |
+==============================================================================+
BIOS:
   1).Modify WLAN ASPM(L1 enable , L0 Disable)
   2).Modify the model name is error on CMOS. 
   3).Modify HDD pwd should be frozen also after warm boot from OS even HDD pwd is not Set.
   4).Modify input supervisor/user password is not sync on S4 resume.
   5).Implement second souce of clockgen
   6).Improve long run issue from insyde.

EC:
Fixed:
       1.> Fix function key can be used in BIOS setup menu.
Modified:
       1.> Fan table update.

+==============================================================================+
| MODEL NO. :  KAV10                               RELEASE DATE : 12/30/2008   |
|------------------------------------------------------------------------------|
|   Major Version    : V0.12                    	                       |
|   KBC BIOS Version : V0.12                                                   |
|   VGA BIOS         : 1585                                                    |
|   Phase Status     : B Build                                                 |
|   Flash Utility Ver: 1.2n                                                    |
|   Clock Generator  : 01h,84h,F1h,66h,FFh,E8h,03h,06h,14h,A5h,01h	       |
|   Checksum (FD)    : C81E h           		                       |
+==============================================================================+
BIOS:
   1). Disable setupmeun Advance and power funtion
   2). Update HDD Forzen function (for set HDD password and unplug HDD)
   3). Disable show driver post time.
   4). Fix If enter "New pw" different with "Confirm pw" to modify HDD pw, it will let you to create a new pw. (AL90-220)
   5). Update int15 function to match acer int15 V3.4 spec. 
   6). Fixed setting hdd password can't shutdown->restart. (AL90-144,191,453)
   7). Fix setup menu passowrd help text.
   8). Improve S4 long run fail.

EC:
Fixed:
       1.> Change hotkey Fn+s,a to Fn+d,x.
       2.> Fix no sound under dos mode.
       3.> Fix bobo noise when restart,resume from S3,S5.
Modified:
       1.> Add c45 dBE, c45 dBF for 3G enable/disable.

+==============================================================================+
| MODEL NO. :  KAV10                               RELEASE DATE : 12/23/2008   |
|------------------------------------------------------------------------------|
|   Major Version    : V0.11                     	                       |
|   KBC BIOS Version : V0.11                                                   |
|   VGA BIOS         : 1585                                                    |
|   Phase Status     : B Build                                                 |
|   Flash Utility Ver: 1.2n                                                    |
|   Clock Generator  : 01h,84h,F1h,66h,FFh,E8h,03h,06h,14h,A5h,01h	       |
|   Checksum (FD)    : 6885 h           		                       |
+==============================================================================+
BIOS:
   1). remove SMM code (AL90-389)
   2). Update MiscSubclass code base to match JAL90.
   3). Fixed BT/3G can't find on first S4 resume, the issue occurred on DC mode at flash BIOS.
   4). Fix input user password into setup menu can't set HDD password.
   5). Correct 3G support on WMI function.
   6). Fix If enter "New pw" different with "Confirm pw" to modify HDD pw,it will let you to create a new pw.
   7). Modify HDD Forzen function. 
   8). S4 resume unstable when SeamlessUsb on 

EC:
 Modified:
	1.> Modify fan table.
	2.> Modify battery LLC voltage.
	3.> Modify S4 pwr btn status.
 Add:
+==============================================================================+
| MODEL NO. :  KAV10                               RELEASE DATE : 12/19/2008   |
|------------------------------------------------------------------------------|
|   Major Version    : V0.10                     	                       |
|   KBC BIOS Version : V0.10                                                   |
|   VGA BIOS         : 1585                                                    |
|   Phase Status     : B Build                                                 |
|   Flash Utility Ver: 1.2n                                                    |
|   Clock Generator  : 01h,84h,F1h,66h,FFh,E8h,03h,06h,14h,A5h,01h	       |
|   Checksum (FD)    : 6868 h           		                       |
+==============================================================================+
BIOS:
   1). Password status "Not installed/Installed" doesn't meet spec. It should be "Set/Clear".
   2). Fixed "Can flash Bios successfully on DC mode" issue.
   3). Fixed use user password enter BIOS can clear supervisor password.
   4). Fixed Hdd Password help text, Date help text.
   5). Modify disable PCIE port2.
   6). Modify the system is restart with some memory on idle.
   7). Fix press "Fn+F4" show "/" and "Fn+->" show "+" in dos mode.
   8). Fix boot to hdd directly, no need to ask hdd paswd again,if Hdd paswd is the same as User/Supervisor paswd.
   9). Fixed display will show clone mode on POST.
  10). Fixed Int15AutoTest password fuction is fail.
  11). Fixed Fn+F5 can't switch to LCD by D-sub even didn't install Launch manager.
  12). Modify WMI function.
  13). Implement Get boot sequence on WMI function
  14). Implement Set boot sequence on WMI function
  15). Get D2D enable status on WMI function
  16). Implement change partition to Hidden Partition by Pressing Alt+F10
  17). Implement EON EN25F80 / 25F16 SPI ROM support.


EC:
 Fixed:
	1.> Fix battery voltage protection wrong setting .
	2.> Fix BOBO noise.
	3.> Fix S4 wake on lan issue.
	4.> Fix BT led on in crisis.
	5.> Fix Fn+pgup,pgdn.
 Modified:
	1.> Add Fn+F5 function for swip to LCD without launch manager.
	2.> Modify Fan output voltage & Fan table.
	3.> Add acer batt id.
	4.> Modify wireless device resume state in S4 DC mode.
	5.> Modify AD protect function.

+==============================================================================+
| MODEL NO. :  KAV10                               RELEASE DATE : 12/09/2008   |
|------------------------------------------------------------------------------|
|   Major Version    : V0.09                     	                             |
|   KBC BIOS Version : V0.09                                                   |
|   VGA BIOS         : 1585                                                    |
|   Phase Status     : B Build                                                 |
|   Flash Utility Ver: 1.2n                                                    |
|   Clock Generator  : 01h,84h,F1h,66h,FFh,E8h,03h,06h,14h,A5h,01h	           |
|   Checksum (FD)    :  44BE h          		                                   |
+==============================================================================+
BIOS:
   1). Fix 3dmark05 pop out of video memory message.
   2). Fix Acer battery show battery manufacture name incorrectly.
   3). Item Specific Help about System Time/Date error.
   4). Password status "Not installed/Installed" doesn't meet spec. It should be "Set/Clear".
   5). Fix after load default boot sequence priority not change.
   6). Fix Press <F2> message and Setup password help text.
   7). Fix HDD Paaword.
   8). Modify PC Beep.
   9). Modify AUO Panel ID.

EC:
 Fixed:
	1.> Fix S3 will resume when Lid open.
	2.> Keep TP status after resume from S3,S4,S5.
	3.> Low batt beep under DOS.
 Modified:
	1.> Add cmd45 dat2F for power button status detect.
	2.> Modify fan table. 

+==============================================================================+
| MODEL NO. :  KAV10                               RELEASE DATE : 12/02/2008   |
|------------------------------------------------------------------------------|
|   Major Version    : V0.08                     	                       |
|   KBC BIOS Version : V0.08                                                   |
|   VGA BIOS         : 1585                                                    |
|   Phase Status     : A Build                                                 |
|   Flash Utility Ver: 1.2n                                                    |
|   Clock Generator  : 01h,84h,F1h,66h,FFh,E8h,03h,06h,14h,A5h,01h	       |
|   Checksum (FD)    : 4C79 h          		                               |
+==============================================================================+
BIOS:
   1). Disable non use port. 
   2). Fix if resume from s4, system can boot into USB storage.
   3). Fix Supervisor/User Password can't save issue.
   4). Modify in dos can't detect 3G card.
   5). Fix when resume from lid switch S4, After enter S3 resume , it will auto enter S4. 

EC:
 Fixed:
	1.> Fix wake on lan.
 Modified:
	1.> Modify fan output value.
	2.> Brightness table update.

+==============================================================================+
| MODEL NO. :  KAV10                               RELEASE DATE : 11/25/2008   |
|------------------------------------------------------------------------------|
|   Major Version    : V0.07                     	                       |
|   KBC BIOS Version : V0.07                                                   |
|   VGA BIOS         : 1585                                                    |
|   Phase Status     : A Build                                                 |
|   Flash Utility Ver: 1.2n                                                    |
|   Clock Generator  : 01h,84h,F1h,6Eh,FFh,ECh,03h,06h,14h,A5h,01h	       |
|   Checksum (FD)    : 77EB h          		                               |
+==============================================================================+
BIOS:
   1). Change to detect WLAN port1 to port0.
   2). Fix ALT+F10 function can't work.
   3). Modify int15 Wireless & Penal function
   4). Fix Internal KB/Mouse can't WinFlash.
   5). Add SLP2.0 Support
   6). Fix setup menu video memory word(correct : 8MB)
   7). Plug 3G card (option) with Flash Disk can't boot 
   8). Fixed Cannot save User Password that is same as Supervisor Password
   9). Fixed int15 function for ODD
  10). Fixed S4 resume will auto into s4 when idle 1 min

EC:
Modified:
 	1.> Pin EN_WOL moved.
	2.> Brightness table update.
	3.> Temperature from T-diode minus 10 degree.

+==============================================================================+
| MODEL NO. :  KAV10                               RELEASE DATE : 11/18/2008   |
|------------------------------------------------------------------------------|
|   Major Version    : V0.06                     	                       |
|   KBC BIOS Version : V0.06                                                   |
|   VGA BIOS         : 1585                                                    |
|   Phase Status     : A Build                                                 |
|   Flash Utility Ver: 1.2n                                                    |
|   Clock Generator  : 01h,84h,F1h,6Eh,FFh,ECh,03h,06h,14h,A5h,01h	       |
|   Checksum (FD)    : 0F48 h          		                               |
+==============================================================================+
BIOS:
   1).Modify Synaptics PnPID to SYN1B1C
   2).Add and modify Penal ID(CMO N101L6-L02 and AUO B089AW01 V1)
   3).Fixed Winflash can't work.
   4).Fixed abnormal modle name when flash BIOS
   5).Fixed password can not save
   6).Fix 3G card (Qualcomm) some device didn't exist at device manager 
   7).Fix main item of setup menu
   8).Fixed S3 Resume incorrect EC command
   9).Modify Crisis function.
  10).Add int15 3G module support for Qualcomn.
  11).Disable DTS support on ASL
EC:
Modified:
	1.> LAN_WAKE function modified
	2.> Fix wireless device status after resume.
	3.> Brightness table update.
	4.> Fan table modified.
	5.> Ignore WWAN_CLKREQ input signal.
+==============================================================================+
| MODEL NO. :  KAV10                               RELEASE DATE : 11/11/2008   |
|------------------------------------------------------------------------------|
|   Major Version    : V0.05                     	                       |
|   KBC BIOS Version : V0.05                                                   |
|   VGA BIOS         : 1585                                                    |
|   Phase Status     : A Build                                                 |
|   Flash Utility Ver: 1.2n                                                    |
|   Clock Generator  : 01h,84h,F1h,6Eh,FFh,ECh,03h,06h,14h,A5h,01h	       |
|   Checksum (FD)    : 1405 h          		                               |
+==============================================================================+
BIOS:
   1.) Set 82801GBM I/O Controller Hub (ICH7M) Serial IRQ in quiet mode
   2.) Modify int15 3G Module type & CPU Type function to meet Acer Spec.
   3.) Add int15 CCD type for Liteon and remove Logitech ccd type.
   4.) Implement TSI TS25L80P (1M) SPI ROM support.
   5.) Show correct Bios Version and Date in XP.
   6.) Fixed can't save Password.
   7.) Fix boot sequence priority.
   8.) Reduce POST time.
   9.) Mdify ENE code match JAL90.
  10.) Modify code for power management(battery life).

EC:
Modified:
	1.> Fan Table OK.
	2.> WLAN default setting ON.
	3.> Power Sequance, delay SYS_ON rise time.

+==============================================================================+
| MODEL NO. :  KAV10                               RELEASE DATE : 11/04/2008   |
|------------------------------------------------------------------------------|
|   Major Version    : V0.04                     		               |
|   KBC BIOS Version : V0.04                                                   |
|   VGA BIOS         : 1585                                                    |
|   Phase Status     : A Build                                                 |
|   Flash Utility Ver: 1.2n                                                    |
|   Clock Generator  : 01h,84h,F1h,6Fh,FFh,ECh,03h,06h,14h,A5h,01h	       |
|   Checksum (FD)    : D70D h          		                               |
+==============================================================================+
BIOS:
   1.) Fixed send Panel ID comand to EC
   2.) Get correct Int15 function for CCD
   3.) Fixed BIOS password have illegal display "*" at input box when exceed 9 characters
   4.) Modify LID function fail.
   5.) Get correct Int15 function for 3G
   6.) Solve extenal monitor can find flicker.
   7.) Solve boot logo hot key, setup menu, boot manager and quick boot function.
   8.) Disable legacy usb support for CardReader.
   9.) Modify VerbTable incorrect after resume form S3
  10.) Modify GPIO Value
  11.) Fixed Bus 3 has not restore PCI Register.
EC:
Modified:
	1.> Update EC common code to ver50.
	2.> Battery parameter update.
	3.> Disable Tx,Rx when system off.

+==============================================================================+
| MODEL NO. :  KAV10                               RELEASE DATE : 10/28/2008   |
|------------------------------------------------------------------------------|
|   Major Version    : V0.03                     										           |
|   KBC BIOS Version : V0.03                                                   |
|   VGA BIOS         : 1585                                                    |
|   Phase Status     : A Build                                                 |
|   Flash Utility Ver: 1.2n                                                    |
|   Clock Generator  : 01h,84h,F1h,6Fh,FFh,ECh,03h,06h,14h,A5h,01h		         |
|   Checksum (FD)    : 4539 h          		                                     |
+==============================================================================+
BIOS:
   1.) Fix boot from WindowsXP-SP3 disc to install OS cause black screen.
   2.) Add PenalID Cmd for EC(AUO & CMO).
   3.) Fixed 3G card(Qualcomm) can't work.
   4.) LCD will grey when press power button one time in Dos mode.
   5.) Fixed BIOS password have illegal character "~".
   6.) Change Insyde and Intel Logo place.
   7.) Get correct Int15 function for(MailLed/WLAN/BlueTooth/1394/ODD/TouchPad)
   8.) Atheros XB63 can't find AP.
   9.) Modify S4 resume will show POST screen.
  10.) Fix can't find BT & 3G after restart OS.
  11.) Update PXE-ROM for AR8132
  12.) Update EC k52a003a.rom
EC:
Fixed:
	1.> Fix lan wake for S4.
	2.> Fix LCD flash problem.
 Modified:
	1.> Modify battery parameters.
	2.> USB_ON reponses opposite to SYS_ON.
	3.> EC_MUTE delays 650ms while EAPD sets low. 
	4.> Set wireless devices default setting to OFF.
	
+==============================================================================+
| MODEL NO. :  KAV10                               RELEASE DATE : 10/21/2008   |
|------------------------------------------------------------------------------|
|   Major Version    : V0.02                     										           |
|   KBC BIOS Version : V0.02                                                   |
|   VGA BIOS         : 1585                                                    |
|   Phase Status     : A Build                                                 |
|   Flash Utility Ver: 1.2n                                                    |
|   Clock Generator  : 01h,84h,F1h,6Fh,FFh,ECh,03h,06h,14h,A5h,01h		         |
|   Checksum (FD)    :  2029 h          		                                   |
+==============================================================================+
BIOS:
   1.) Modify SCU to read EEPROM (Reflash all BIOS DMI value are fail)
   2.) BIOS Load default F12 option didn't Disable.
   3.) Audio DEV & SUBSYS number incorrect .
   4.) Modify Detect 3G Exist Or Not.
   5.) Add PXE Rom.
   6.) Update code[Base on Insyde KAV10005(Kernel 2029)]
   7.) Modify VerTable Internal Microphone not work.
   8.) Fixed battery never charged full.
   9.) Modify LAN SVID.
  10.) Modify it is not sensitive to detect F2/F12 event in POST duration. (USB keyboard.) 
  11.) Update EC k52a002a.rom
  
EC:
 Fixed:
	1.> Fix speaker no sound.
	2.> Enable BT,WLAN,3G detection and control.
	3.> Fix S3 can't wake from keyboard.
	4.> Fix Fn+F6 can't wake by any keys.
 Modified:
	1.> Modify battery charging method.
   
+==============================================================================+
| MODEL NO. :  KAV10                               RELEASE DATE : 10/14/2008   |
|------------------------------------------------------------------------------|
|   Major Version    : V0.01                     										           |
|   KBC BIOS Version : V0.01                                                   |
|   VGA BIOS         : 1585                                                    |
|   Phase Status     : A Build                                                 |
|   Flash Utility Ver: 1.2n                                                    |
|   Clock Generator  : 01h,84h,F1h,6Fh,FEh,ECh,03h,06h,14h,A5h,01h		         |
|   Checksum (FD)    : F792 h          		                                     |
+==============================================================================+
BIOS:
   1.) Fix can't find LAN.
   2.) Modify Detect BT/WLAN Exist Or Not.
   3.) Modify VerbTable and Routing
   4.) Implement get MAC Address from EEPROM.
   5.) Update EC k52a001a.rom
EC:
Modified:
   1.> Add Fn + B for volume control.
   2.> Fix pwr led,bt led.
   3.> Fix K/B matrix error.(Dislocation of "Ins" and "Del")
   4.> Add scancode and event for 3G device.

 
