----------------------------------------------------------------------------
BIOSAC Module   V1.3
MEBX            V3.0.2.0004
LAN ROM         V1.2.50
VGA ROM         V1471
RAID ROM        V8.6.0.1007
MRC             V2.30
----------------------------------------------------------------------------
Release R01-B4 (081020) BIOS
Release R01-B4L(081020) BIOS
1.BIOS will recognize USB Flash as HDD and boot from it firstly.Change boot behavior
  to force system boot from real HDD instead of USB flash.
2.Show Acer Copyright string.

Release R01-B4 (081007) BIOS
Release R01-B4L(081007) BIOS
1.Update RAID ROM from  V7.6.0.1011 to V8.6.0.1007 to fix RAID incompatible when system install 1G Naya
  RAM Module.
2.Update AMT kit to V3.2.1.1030(include ME Firmware Version 3.2.1.1022).


Release R01-B3 (080724) BIOS
Release R01-B3L(080724) BIOS
1.Fix System will hang during S3 resume path.
2.Support APM turn off system function for PCI Guard Card.

Release R01-B3 (080707) BIOS
Release R01-B3L(080707) BIOS
1.Fix Acer's application can't change boot sequence through int15.
2.Support E8400,E8500 and E8600 CPU.
3.Fix can't find PCI Guard Card after power on.

Release R01-B3 (080414) BIOS
Release R01-B3L(080414) BIOS
1.BIOS will recognize USB Flash as HDD and boot from it firstly.Change boot behavior
  to force system boot from real HDD instead of USB flash.
2.Enlarge length of Supervisor and User Password in BIOS Setup Menu to 8 characters.
3.Open SMART FAN function in BIOS Setup Menu.
4.Ask to enter password when user press F12 to invoke popup Menu, even if
  Security check is "Setup" in BIOS Setup Menu.Supervisor can invoke popup menu
  but User can't do.
5.Set access level to let User can view detail items in BIOS Setup Menu.
6.Update CPU Module to fix WMI Code Creator will get wrong CPU name when system is installed E8400 CPU.


------------------------------------------------------------------------------
Release R01-B2 (080314) BIOS
Release R01-B2L(080314) BIOS

1.RAID ROM will show incompatible message when system install 1G Nanya RAM Module.
2.OEM LOGO will disappear and then appear after flashing BIOS and rebooting system.

-----------------------------------------------------------------------------
Release R01-B1 (080226) BIOS
Release R01-B1L(080226) BIOS

1.Adding Microcode M1010677703, M101067660B, M011067660B for Q9000 Sequence,
  QX9650.

2.Fix system will show blue screen with 64bit OS.

----------------------------------------------------------------------------
Release R01-B0 (080125) BIOS
Release R01-B0L(080125) BIOS

01.Fix E8200 CPU resume fail from S3.
02.Add Core-Multi-Processing in Advanced Chipset features of BIOS SETUP.
03.Modify SMBIOS String from 2.3.3 to 2.5 in BIOS SETUP Menu.
04.Support Q9300 CPU

----------------------------------------------------------------------------
Release R01-A4 (080107) BIOS
Release R01-A4L(080107) BIOS


01.Fix CPU fan will full on after flash BIOS.
02.Modify thermal profile for Wolfdale and Yorkfield.
03.Fix System will resume from S3 by usb mouse or keyboard when disable "usb
   wakeup from S3" in BIOS setup menu.
04.Update TXT relatvie code.
   Update TXT/VA/Vt-d module.
   Update MRC (V2.30) and TXT BIOSAC module(V1.3).
   Roll back TPM module to 8.00.15_TCPA_0.13.
   Remove "Disable MCHBAR MMIO" and "Lock MCHBAR MMIO" item in BIOS setup menu.
05.Add Acer OEM ID (AcerSystem) into R01-A4L for Windows XP
06.Patch OS will show blue screen in 0c chamber.
07.Set all of default UUID value to 0xFF.

----------------------------------------------------------------------------
Release R01-A3(071102) BIOS
Release R01-A3L(071102) BIOS

BIOSAC Module   V1.2
MEBX            V3.0.2.0004
LAN ROM         V1.2.50
VGA ROM         V1471
RAID ROM        V7.6.0.1011
MRC             V2.20


01.Fix Shutdown function can't work when shutdown temperatupre reach.
02.Remove "Boot Other Device" in Advanced Setup.
03.Add "Silent Boot" in Advanced Setup.
04.Update TPM module from 8.00.15_TCPA_0.13 to 8.00.15_TCPA_0.14.Beta1
05.Update RAID ROM to V7.6.0.1011
06.Update CPU module  8.00.12_CPU-P4_3F.03Beta 8.00.12_CPU-P4_3F.06RC
07.Add Microcode to support Extreme Quad-Core  Processor B-1,Yorkfield/Wolfdale (CPUID 10676).
08.Add Microcode to support Extreme Quad-Core  Processor B-1,Yorkfield/Wolfdale (CPUID 10674).
09.Add IANA number,041AH.
10.Fix wrong string,"excusively",on post screen.
11.Fix TPM can't be used in XP.

----------------------------------------------------------------------------

Release R01-A2(070830)BIOS
Release R01-A2L(070830)BIOS
01.Fix S4 resume failure when load BIOS default and then do S4.
02.Update AMTNVM
  HostIf SOL Enabled = 1
  HostIf IDER Enabled = 1
03.Fix ID09: Pluging out AC after S4,and then plug in AC,Power LED will be lighted.
04.Fix ID07: Set PWRON after PWR-Fail as "ON" in BIOS,shutdown the EUT by start menu in Vista,
   after power off,plug out AC,then plug in AC,the EUT will not be power on automatically.
05.system will hang when we boot on Xen with VT-d patch while USB was enabled in bios.
06.Add an additional RMRR region (in high memory) for USB.
07.Update DMI info in BIOS setup.
   Remove "MB S/N(Serail Number)"
   Remove "Main Board ID"
08.Fix ID1: System can't boot from original HDD if non-bootable USB disk is connected.
09.Fix ID10:System can't go to next boot device if system detects non-bootable USB HDD.
10.Fix ID11:PCI Lan card can't wake up system from S5.
11.Update CPU Micro code to support E6850(CPUID 6F9),E6750(CPUID 6F9),440/430/420(CPUID 10661).
12.Fix PS2 Mouse can't work after OOBE until reboot system.

13.Fix Fan Speed will full on after flash BIOS.
14.Remove SHIFT+F7 hot key in BIOS setup menu.
15.Update TXT/VA/Vt-d Module.
16.Add VSCC table in XML to support SPI ROM MX25L1605.
17.Update CPU Module from 8.00.12_CPU-P4_3F00Beta to 8.00.12_CPU-P4_3F03Beta.
18.Support CPU thermal profile for kenstfield
19.Update ANTNVM, clear "Remote Configuration Enabled" to 0 to pass Energy Star 4.0
20.Fix can't detect Conroe CPU ID 6FBh in thermal profile
21.Rename product model name to "Verition T/M/S661;461"
22.Set thermal diode degree value READ ONLY
23.Clear RCFG=0 in ANTNVM.
24.Show unit on shutdown temperature 80.
25.Fix CPU fan always keep the same rpm.
----------------------------------------------------------------------------

Release R01-A1_E(070724)BIOS
Release R01-A1L_E(070724)BIOS
1.Update AMTNVM and keep R01-A1/R01-A1L (070724) System BIOS
  Change AMT Configuration Mode from Small Business Mode to Enterprise Mode.
  AMT Configuration Mode= 0 -> Enterprise Mode
  AMT Configuration Mode= 1 -> Small Business Mode


Release R01-A1(070724)BIOS
Release R01-A1L(070724)BIOS
1.Update ANTNVM
2.Fix ID18, OBR function can't work on Acer Logo screen.
3.Fix ID19, Warning beep will sound after resume from S3 when warning temperature
  enable.
4.Fix ID21. Hidden thermal profile.
----------------------------------------------------------------------------

Release 070718(R01-A0) BIOS
01.Change user password behavior
02.Fix ID46. Change boot device priority behavior.
03.Update PXE ROM.
04.Update CPU MicroCode(M016FDA1,M0110671106)
05.Pulling AC,System will power on and then shut down.but power LED still turn on.
06.Fix ID07, EUT can't resume from S1 by RTC
07.Fix ID10. define USB S4 wakeup as "Disabled"
08.Fix ID12. Turn off PS2 Num lock in S1.
09.Fix ID15, BIOS just show 19 DMI character in setup Menu.
10.Fix ID30. Prompt "Press F1 message"


Release 070711(R01-A0) BIOS
1.Fix ID47/48. Enlarge input buffers to save password to avoid system corruption.
2.Update ME module
 "ME Subsystem"	        8.00.14_ME-1.00.08	8.00.14_ME-1.00.09
 "ME - Core"	        8.00.14_ME-1.00.08	8.00.14_ME-1.00.09
 "ME - CSP: HECI"       8.00.14_ME-1.00.08	8.00.14_ME-1.00.09
 "ME - CSP: AFSC"       8.00.14_ME-1.00.08	8.00.14_ME-1.00.09
 "ME - BSP"	        8.00.14_ME-1.00.08	8.00.14_ME-1.00.09

Release 070710(R01-A0) BIOS
1.Fix disabling intrusion still check intrusion pin.

Release 070709(R01-A0) BIOS
1.Fix intrusion warning always alarms message.

Release 070708(R01-A0) BIOS
1.Fix ID038, Fill correct value in DMI type 17,memory speed.
2.Fix ID027. Disabling Quick boot will show RAM sizeing process.
3.Fix ID055, Enable interrupt to avoid <pause break> key malfunction.
4.Fix ID111. "Wake up by PME" item in BIOS setup menu can control Lan wakeup
  function.
5.Replace APM module and Add TXT/VT-d/VA funciton.
6.Update ME firmware from 1104 to 1105.

Release 070706(R01-A0) BIOS
01.Fix ID03, USB KB/MS can't be used immediately after resume from S3 and S4.
02.Fix ID29. System will prompt message to ask user to input password when
   user Press F12.
03.Fix ID36. Set BIOS version to R0-Ax in DIM type 00.
04.Fix ID37. Set BIOS version to R0-Ax in DIM type 01.
05.Fix ID39. Set DIM type01,Offset 12 to DDR2.
06.Fix ID40. Turn off Num Lock of PS2 KB when system do s3/s4/s5
07.Fix ID42. System will show "USB Device not recognized"sometimes after resuming S3.
08.Fix ID79. Setting product name to "Veriton T/M/S 661" to let LanScope can
   be installed.
09.Fix ID44. Gray usb funciton item.
10.Fix ID56. Warning message should be display after Intrusion alarm is disabled.

Release 070704(R01-A0) BIOS
01.Update MRC from 2.1 to 2.2
02.Fix ID 11. Move Power LED control code to oem_acpi_sx to avoid delay time
03.Fix ID 17. Show "This BIOS exclusively for Acer Only" string on POST screen.
04.Fix ID 22. Support PS2 KB/Mouse S1/S3 wakup control in Setup Menu.
05.Fix ID 23. Show EM64T
06.Fix ID 33. Supervisor Password item includes security item.
07.Fix ID 59. Modify Copyright year in setup menu.
08.Fix ID 60. System will beep when system can't detect memory.
09.Fix ID 63. Define F2/F3 in help window.
10.Fix ID 65. Show 8GB in Max Capacity field(DMI typ16,offset 07h).
11.Fix ID 12. Beep one sound during BIOS POST.
12.Update Verb Table.
13.Modify int15 related code to avoid CMOS BAD.


Release 070627 (R01-A0)BIOS
1.Support Auto detect DIMM/PCI CLOCK.
2.Support thermal profile.
3.Set Green LED to blinking when platfrom enters S3.
4.Turn off POWER LED when AMT G3 stage.
5.Set HW monitor VDIM voltage OFFSET.
6.Set power package to 5
7.Update Core Code from Soft Safe.
"Intel - NB: Bearlake"	8.00.14_NB-Bearlake_009	8.00.14_NB-Bearlake_010
"Bearlake - NB Board"	8.00.14_NB-Bearlake_009	8.00.14_NB-Bearlake_010
"Bearlake - NB Chipset"	8.00.14_NB-Bearlake_009	8.00.14_NB-Bearlake_010
"Bearlake MRC"	        8.00.14_NB-Bearlake_009	8.00.14_NB-Bearlake_010
"Intel - SB: ICH9"	8.00.14_SB-ICH9_010	8.00.14_SB-ICH9_011
"ICH9 - SB Board"	8.00.14_SB-ICH9_010	8.00.14_SB-ICH9_011
"ICH9 - SB Chipset"	8.00.14_SB-ICH9_010	8.00.14_SB-ICH9_011
"Intel AMT"	        8.00.13_AMT-3.0.04	8.00.13_AMT-3.0.06
"AMT/ME : BIOS Extension"	8.00.13_AMT-3.0.04	8.00.13_AMT-3.0.06
"AMT/ME : BIOS Extension 2.0"	8.00.13_AMT-3.0.04	8.00.13_AMT-3.0.06
"AMT/ME : BIOS Extension 2.1"	8.00.13_AMT-3.0.04	8.00.13_AMT-3.0.06
"AMT/ME : BIOS Extension 2.5"	8.00.13_AMT-3.0.04	8.00.13_AMT-3.0.06
"AMT/ME : BIOS Extension 3.0"	8.00.13_AMT-3.0.04	8.00.13_AMT-3.0.06
"AMT CSP: ICHx"	        8.00.13_AMT-3.0.04	8.00.13_AMT-3.0.06
"ME Subsystem"	        8.00.14_ME-1.00.07	8.00.14_ME-1.00.08
"ME - Core"	        8.00.14_ME-1.00.07	8.00.14_ME-1.00.08
"ME - CSP: HECI"	8.00.14_ME-1.00.07	8.00.14_ME-1.00.08
"ME - CSP: AFSC"	8.00.14_ME-1.00.07	8.00.14_ME-1.00.08
"ME - BSP"	        8.00.14_ME-1.00.07	8.00.14_ME-1.00.08


Release 070615 (R01-A0)BIOS
1.Set Power package to 3 in MEBX to solve S3/S4 will hang at "E0".
2.Update ME Kit to 1089(v3.0.2.0004)

Release 070611 BIOS
1.Update ACPI-Core/Board Module
Release 070609 BIOS
1. Update CPU Module to Fix 2G*4 issue.
2. Fix Power LED can't work fine.

Release 070607 BIOS
1.Update Core Code from Source Safe.
  CPU
  Intel-SB
  Intel-NB
  ACPI-NB
  ACPI-SB
  AHCI
  AMT
  ME
  SMIBIOS
  SREDIR
  TPM
  PCI-EXPRESS
  SMIFLASH
  USB2

2.Fix all of DTM problems
3.Update ME firmware to 1089(v3.0.2.0003).

Release 070531 BIOS
1.Fix ID56/85, TPM will be disabled in OS.
2.Fix ID86, PS2 keyboard can't wakeup system from S3 state.
3.Fix ID94, Modify AMI sign on string(2006->2007)
4.Fix ID95, Clear thermal Diode degree value to 0

Release 070529 BIOS
1.Fix ID20. Supervisor password and User password aren't the same.
2.Fix ID56. Show Clearing The TPM item in setup menu.
3.Fix ID58, System hang at "20" if press USB device wakeup from S4.
4.Fix ID72, Shutdown temperature malfunction.
5.Fix ID78, Hiding SATA1 and SATA1 when disable SATA configuration.
6.Fix ID85, TPM chip state always disabled in Vista/XP.
7.Fix ID93, Change default setting to "Disabled" in "PS2 KB/Mouse PowerOn by S3"


Release 070523 BIOS
1.Fix ID40. Use Blue on White LOGO.
2.Fix ID53 and ID54. Support Acer INT15 function.
3.Fix ID65. Support chassis function
4.Fix ID77. Beep when system don't detect any memory.
5.Fix ID84. Correcting GPIO definition and hide VDIMM item in SETUP menu.
6.Fix ID86. Modify PS2 keyboard item in SETUP Menu.
7.Fix ID87, Don't Support PS2 keyboard/Mouse wakeup from S4.
8.Fix ID88. Change default setting to "RAID" Mode in SATA Mode.


Release 070518 BIOS
1.Fix ID19. Support information in setup menu.
2.Fix ID60. Adjust F12 string on screen
3.Fix ID75, System will boot twice.
4.Fix ID74, Rewriting EIST help.
5.Fix ID76. Adding "Virus Protection" in setup menu.
6.Fix SATA ODD can't find when it is installed after HDD SATA port.
7.Support VT100 terminal type.

Release 070517 BIOS
Update ME KIT to 1081.
1.Fix ID8, F9 Help description. Remove "Compatible mode" in SATA.
2.Fix ID9, Can't find HDD in RAID MODE.
3.Fix ID46. Correct VDIMM voltage.
4.Fix ID55. Support auto detect Floppy function.
5.Fix ID56. Correct "Press Enter" string.
6.Fix ID58. Adding PS2 KB/Mouse wakeup function.
7.Fix ID63, Adding VDIMM item in setup menu.
8.Fix Can't find SATA CD-ROM in RAID MODE.
9.Support OBR function.

Release 070501 BIOS
1.Support A2 silicon.
2.Fix ID17, System will shutdown but BIOS don't enable shutdwon Temperature.
3.Fix ID31,Onboard Lan will disappear when disable and then re-enable it on setup menu.

Release 070425 BIOS
1.Fix ID39,  can't install TPM dirver issue.
2.Fix ID8. Disable "Energy Lake"
3.Fix ID15. Enable Intex XD bit
4.Add production information for Acer Spec.
5.Add Int 15 funciton for Acer Spec
6.Fix ID21. Enable Smart function and Add Vocre message
7.Fix ID22,  Setting default value for wake-up event.
8.Fix ID35. Add Chassis function.
9.Fix iD38.  Removing "Press F12 for boot from network" message and show "F12 for BBS POPUP"
10 Enable Memory Remapping function.


Release 070419 BIOS
1.Fix ID3 can't find TPM time in setup menu.
2.Fix ID4 PCI slot2 can't work.
3.Fix ID6 Set F12 to BBS
4.Fix ID9 Can't boot to HDD when enable RAID mode in setup menu.
5.Fix ID12, Removing DDRII 1067 memory setting.
6.Fix ID18 System will shutdown and then power on after saving cmos item.
7.Fix ID30 Lan boot funciton fails.
