
 ---------------------------- ReadMe First ---------------------------

    To update firmware, you should follow steps below.
 
    0. Condition
	This loader program works only for upgrading shipped CD/R/RW
	drives(UJDA310L ver.1.32 or higher) into ver.1.37R_AC.
        Do not connect LS-120 with the system when upgrading F/W.

    1. Upgrading flash ROM
        Condition :
            - PC environment : "Command Pronpt Only" in Win95/98
	@@- Copy all of DOSLDRCS.EXE, ver137R_AC.bin into the same directory.
        Upgrading Steps :
            When CD-R/RW drive is connected on Secondary/Master,
            please type the following command.
            > DOSLDRCS /AM  ver137R_AC.bin [ Enter ]

            In other connection cases, you should type the following 
	    command respectively.
            1) Primary/Slave
                > DOSLDRCS /AP  ver137R_AC.bin  [ Enter ]
            2) Secondary/Slave
                > DOSLDRCS /AS  ver137R_AC.bin  [ Enter ]         
            When you find the following messages, the upgrade has 
	    finished successfully.

                -------------------------------------------------------
                Program Down Loader for MS-DOS Ver.0.07
                Copyright (C) Kyushu Matsushita Electric Co.,Ltd. 1998

                  Select Drive = Secondary / Master
                  Inquiry Data = MATSHITA : UJDA310     : 137

                Sending Program   : ooooooooooo
                Erasing Flash ROM : oooo
                Writing Program   : oooooooooooooooo
                Verifying Program : oooo
                Complete     

                OK 

     2. Reset
	Please reboot the system for hardware reset to recognized the drive.
	Please make sure if Master or Slave of the drive matches with 
     	the system assignment(CSEL signal) for the drive.


	---------------------------(end of text)--------------------------
